[PATCH v4 2/3] mtd: rawnand: rockchip: copy hwecc PA data to oob_poi buffer

Miquel Raynal miquel.raynal at bootlin.com
Wed Jul 12 05:43:11 PDT 2023


Hi Johan,

jbx6244 at gmail.com wrote on Mon, 10 Jul 2023 14:42:28 +0200:

> Rockchip boot blocks are written per 4 x 512 byte sectors per page.
> Each page with boot blocks must have a page address (PA) pointer in OOB
> to the next page. Pages are written in a pattern depending on the NAND chip ID.
> This logic used to build a page pattern table is not fully disclosed and
> is not easy to fit in the MTD framework.
> The formula in rk_nfc_write_page_hwecc() function is not correct.
> read/write_page_hwecc and read/write_page_raw are not aligned.
> Make hwecc and raw behavior identical.
> Generate boot block page address and pattern for hwecc in user space
> and copy PA data to/from the already reserved last 4 bytes before ECC
> in the chip->oob_poi data layout.
> 
> This patch breaks all existing jffs2 users that have free OOB overlap
> with the reserved space for PA data.

I think I am fine with your patch, but the description is still way too
imprecise.

You need to separate two things: what is done wrong and perhaps why you
detected it or why you need it. Let me propose something:

"
mtd: rawnand: rockchip: Align hwecc vs. raw page helper layouts

Currently, read/write_page_hwecc() and read/write_page_raw() are not
aligned: there is a mismatch in the OOB bytes which are not
read/written at the same offset in both cases (raw vs. hwecc).

This is a real problem when relying on the presence of the Page
Addresses (PA) when using the NAND chip as a boot device, as the
BootROM expects additional data in the OOB area at specific locations.
<here you can put more context about this, like you do in your current
commit log>.

Align the different helpers. This change breaks existing jffs2 users.
"

> 
> Fixes: 058e0e847d54 ("mtd: rawnand: rockchip: NFC driver for RK3308, RK2928 and others")
> Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
> ---
> 
> Changed V4:
>   Reduce subject size
>   Add 'Fixes:' tag
>   Fix abbreviation
>   Reword
> 
> Changed V3:
>   Change prefixes
>   Reword
> ---
>  .../mtd/nand/raw/rockchip-nand-controller.c   | 34 ++++++++++++-------
>  1 file changed, 21 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/mtd/nand/raw/rockchip-nand-controller.c b/drivers/mtd/nand/raw/rockchip-nand-controller.c
> index 37fc07ba57aa..5a04680342c3 100644
> --- a/drivers/mtd/nand/raw/rockchip-nand-controller.c
> +++ b/drivers/mtd/nand/raw/rockchip-nand-controller.c
> @@ -598,7 +598,7 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
>  	int pages_per_blk = mtd->erasesize / mtd->writesize;
>  	int ret = 0, i, boot_rom_mode = 0;
>  	dma_addr_t dma_data, dma_oob;
> -	u32 reg;
> +	u32 tmp;
>  	u8 *oob;
> 
>  	nand_prog_page_begin_op(chip, page, 0, NULL, 0);
> @@ -625,6 +625,13 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
>  	 *
>  	 *   0xFF 0xFF 0xFF 0xFF | BBM OOB1 OOB2 OOB3 | ...
>  	 *
> +	 * The code here just swaps the first 4 bytes with the last
> +	 * 4 bytes without losing any data.
> +	 *
> +	 * The chip->oob_poi data layout:
> +	 *
> +	 *    BBM  OOB1 OOB2 OOB3 |......|  PA0  PA1  PA2  PA3
> +	 *
>  	 * Configure the ECC algorithm supported by the boot ROM.
>  	 */
>  	if ((page < (pages_per_blk * rknand->boot_blks)) &&
> @@ -635,21 +642,17 @@ static int rk_nfc_write_page_hwecc(struct nand_chip *chip, const u8 *buf,
>  	}
> 
>  	for (i = 0; i < ecc->steps; i++) {
> -		if (!i) {
> -			reg = 0xFFFFFFFF;
> -		} else {
> +		if (!i)
> +			oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE;
> +		else
>  			oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
> -			reg = oob[0] | oob[1] << 8 | oob[2] << 16 |
> -			      oob[3] << 24;
> -		}
> 
> -		if (!i && boot_rom_mode)
> -			reg = (page & (pages_per_blk - 1)) * 4;
> +		tmp = oob[0] | oob[1] << 8 | oob[2] << 16 | oob[3] << 24;
> 
>  		if (nfc->cfg->type == NFC_V9)
> -			nfc->oob_buf[i] = reg;
> +			nfc->oob_buf[i] = tmp;
>  		else
> -			nfc->oob_buf[i * (oob_step / 4)] = reg;
> +			nfc->oob_buf[i * (oob_step / 4)] = tmp;
>  	}
> 
>  	dma_data = dma_map_single(nfc->dev, (void *)nfc->page_buf,
> @@ -812,12 +815,17 @@ static int rk_nfc_read_page_hwecc(struct nand_chip *chip, u8 *buf, int oob_on,
>  		goto timeout_err;
>  	}
> 
> -	for (i = 1; i < ecc->steps; i++) {
> -		oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
> +	for (i = 0; i < ecc->steps; i++) {
> +		if (!i)
> +			oob = chip->oob_poi + (ecc->steps - 1) * NFC_SYS_DATA_SIZE;
> +		else
> +			oob = chip->oob_poi + (i - 1) * NFC_SYS_DATA_SIZE;
> +
>  		if (nfc->cfg->type == NFC_V9)
>  			tmp = nfc->oob_buf[i];
>  		else
>  			tmp = nfc->oob_buf[i * (oob_step / 4)];
> +
>  		*oob++ = (u8)tmp;
>  		*oob++ = (u8)(tmp >> 8);
>  		*oob++ = (u8)(tmp >> 16);
> --
> 2.30.2
> 


Thanks,
Miquèl



More information about the linux-arm-kernel mailing list