[PATCH v3 1/3] ARM: dts: imx6sx: Remove LDB endpoint

[Fabio Estevam]

From: Fabio Estevam <festevam at denx.de>

Remove the LDB endpoint description from the common imx6sx.dtsi
as it causes regression for boards that has the LCDIF connected
directly to a parallel display.

Let the LDB endpoint be described in the board devicetree file
instead.

Cc: stable at vger.kernel.org
Fixes: b74edf626c4f ("ARM: dts: imx6sx: Add LDB support")
Signed-off-by: Fabio Estevam <festevam at denx.de>
---
Changes since v2:
- Rebased against 6.5-rc1.

 arch/arm/boot/dts/nxp/imx/imx6sx.dtsi | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
index 3a4308666552..41c900929758 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx.dtsi
@@ -863,7 +863,6 @@ port at 0 {
 							reg = <0>;
 
 							ldb_from_lcdif1: endpoint {
-								remote-endpoint = <&lcdif1_to_ldb>;
 							};
 						};
 
@@ -1309,11 +1308,8 @@ lcdif1: lcdif at 2220000 {
 					power-domains = <&pd_disp>;
 					status = "disabled";
 
-					ports {
-						port {
-							lcdif1_to_ldb: endpoint {
-								remote-endpoint = <&ldb_from_lcdif1>;
-							};
+					port {
+						lcdif1_to_ldb: endpoint {
 						};
 					};
 				};
-- 
2.34.1