[PATCH v4 2/2] phy: mtk-mipi-csi: add driver for CSI phy

Vinod Koul vkoul at kernel.org
Tue Jul 11 04:20:37 PDT 2023


On 20-06-23, 14:18, Julien Stephan wrote:
> From: Phi-bang Nguyen <pnguyen at baylibre.com>
> 
> This is a new driver that supports the MIPI CSI CD-PHY version 0.5
> 
> The number of PHYs depend on the SoC.
> Each PHY can support D-PHY only or CD-PHY configuration.
> The driver supports only D-PHY mode, so CD-PHY
> compatible PHY are configured in D-PHY mode.
> 
> Signed-off-by: Louis Kuo <louis.kuo at mediatek.com>
> Signed-off-by: Phi-bang Nguyen <pnguyen at baylibre.com>
> [Julien Stephan: refactor code]
> [Julien Stephan: simplify driver model: one instance per phy vs one instance
> for all phys]
> Co-developed-by: Julien Stephan <jstephan at baylibre.com>
> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> ---
>  MAINTAINERS                                   |   1 +
>  drivers/phy/mediatek/Kconfig                  |  12 +
>  drivers/phy/mediatek/Makefile                 |   2 +
>  .../mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h    |  62 ++++
>  drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c   | 343 ++++++++++++++++++
>  5 files changed, 420 insertions(+)
>  create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
>  create mode 100644 drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 024d67eb7a94..4d9b6c9f6662 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13189,6 +13189,7 @@ M:	Julien Stephan <jstephan at baylibre.com>
>  M:	Andy Hsieh <andy.hsieh at mediatek.com>
>  S:	Supported
>  F:	Documentation/devicetree/bindings/phy/mediatek,mt8365-csi-rx.yaml
> +F:	drivers/phy/mediatek/phy-mtk-mipi-csi-0-5*
>  
>  MEDIATEK MMC/SD/SDIO DRIVER
>  M:	Chaotian Jing <chaotian.jing at mediatek.com>
> diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
> index 3125ecb5d119..7088382ebc9e 100644
> --- a/drivers/phy/mediatek/Kconfig
> +++ b/drivers/phy/mediatek/Kconfig
> @@ -74,3 +74,15 @@ config PHY_MTK_DP
>  	select GENERIC_PHY
>  	help
>  	  Support DisplayPort PHY for MediaTek SoCs.
> +
> +config PHY_MTK_MIPI_CSI_0_5

Keep this sorted alphabetically pls

> +	tristate "MediaTek MIPI CSI CD-PHY v0.5 Driver"
> +	depends on ARCH_MEDIATEK || COMPILE_TEST
> +	depends on OF
> +	select GENERIC_PHY
> +	help
> +	  Enable this to support the MIPI CSI CD-PHY receiver version 0.5.
> +	  The driver supports multiple CSI cdphy ports simultaneously.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called phy-mtk-mipi-csi-0-5.
> diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
> index c9a50395533e..63f2fa3ec7e5 100644
> --- a/drivers/phy/mediatek/Makefile
> +++ b/drivers/phy/mediatek/Makefile
> @@ -19,3 +19,5 @@ phy-mtk-mipi-dsi-drv-y			:= phy-mtk-mipi-dsi.o
>  phy-mtk-mipi-dsi-drv-y			+= phy-mtk-mipi-dsi-mt8173.o
>  phy-mtk-mipi-dsi-drv-y			+= phy-mtk-mipi-dsi-mt8183.o
>  obj-$(CONFIG_PHY_MTK_MIPI_DSI)		+= phy-mtk-mipi-dsi-drv.o
> +
> +obj-$(CONFIG_PHY_MTK_MIPI_CSI_0_5)	+= phy-mtk-mipi-csi-0-5.o

This one too and no need of empty line

> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
> new file mode 100644
> index 000000000000..97b4c27a1699
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5-rx-reg.h
> @@ -0,0 +1,62 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Copyright (c) 2023, MediaTek Inc.
> + * Copyright (c) 2023, BayLibre Inc.
> + */
> +
> +#ifndef __PHY_MTK_MIPI_CSI_V_0_5_RX_REG_H__
> +#define __PHY_MTK_MIPI_CSI_V_0_5_RX_REG_H__
> +
> +/*
> + * CSI1 and CSI2 are identical, and similar to CSI0. All CSIX macros are
> + * applicable to the three PHYs. Where differences exist, they are denoted by
> + * macro names using CSI0 and CSI1, the latter being applicable to CSI1 and
> + * CSI2 alike.
> + */
> +
> +#define MIPI_RX_ANA00_CSIXA			0x0000
> +#define RG_CSI0A_CPHY_EN			BIT(0)
> +#define RG_CSIXA_EQ_PROTECT_EN			BIT(1)
> +#define RG_CSIXA_BG_LPF_EN			BIT(2)
> +#define RG_CSIXA_BG_CORE_EN			BIT(3)
> +#define RG_CSIXA_DPHY_L0_CKMODE_EN		BIT(5)
> +#define RG_CSIXA_DPHY_L0_CKSEL			BIT(6)
> +#define RG_CSIXA_DPHY_L1_CKMODE_EN		BIT(8)
> +#define RG_CSIXA_DPHY_L1_CKSEL			BIT(9)
> +#define RG_CSIXA_DPHY_L2_CKMODE_EN		BIT(11)
> +#define RG_CSIXA_DPHY_L2_CKSEL			BIT(12)
> +
> +#define MIPI_RX_ANA18_CSIXA			0x0018
> +#define RG_CSI0A_L0_T0AB_EQ_IS			GENMASK(5, 4)
> +#define RG_CSI0A_L0_T0AB_EQ_BW			GENMASK(7, 6)
> +#define RG_CSI0A_L1_T1AB_EQ_IS			GENMASK(21, 20)
> +#define RG_CSI0A_L1_T1AB_EQ_BW			GENMASK(23, 22)
> +#define RG_CSI0A_L2_T1BC_EQ_IS			GENMASK(21, 20)
> +#define RG_CSI0A_L2_T1BC_EQ_BW			GENMASK(23, 22)
> +#define RG_CSI1A_L0_EQ_IS			GENMASK(5, 4)
> +#define RG_CSI1A_L0_EQ_BW			GENMASK(7, 6)
> +#define RG_CSI1A_L1_EQ_IS			GENMASK(21, 20)
> +#define RG_CSI1A_L1_EQ_BW			GENMASK(23, 22)
> +#define RG_CSI1A_L2_EQ_IS			GENMASK(5, 4)
> +#define RG_CSI1A_L2_EQ_BW			GENMASK(7, 6)
> +
> +#define MIPI_RX_ANA1C_CSIXA			0x001c
> +#define MIPI_RX_ANA20_CSI0A			0x0020
> +
> +#define MIPI_RX_ANA24_CSIXA			0x0024
> +#define RG_CSIXA_RESERVE			GENMASK(31, 24)
> +
> +#define MIPI_RX_ANA40_CSIXA			0x0040
> +#define RG_CSIXA_CPHY_FMCK_SEL			GENMASK(1, 0)
> +#define RG_CSIXA_ASYNC_OPTION			GENMASK(7, 4)
> +#define RG_CSIXA_CPHY_SPARE			GENMASK(31, 16)
> +
> +#define MIPI_RX_WRAPPER80_CSIXA			0x0080
> +#define CSR_CSI_RST_MODE			GENMASK(17, 16)
> +
> +#define MIPI_RX_ANAA8_CSIXA			0x00a8
> +#define RG_CSIXA_CDPHY_L0_T0_BYTECK_INVERT	BIT(0)
> +#define RG_CSIXA_DPHY_L1_BYTECK_INVERT		BIT(1)
> +#define RG_CSIXA_CDPHY_L2_T1_BYTECK_INVERT	BIT(2)
> +
> +#endif
> diff --git a/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
> new file mode 100644
> index 000000000000..dbe1d0713fb4
> --- /dev/null
> +++ b/drivers/phy/mediatek/phy-mtk-mipi-csi-0-5.c
> @@ -0,0 +1,343 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * MediaTek MIPI CSI v0.5 driver
> + *
> + * Copyright (c) 2023, MediaTek Inc.
> + * Copyright (c) 2023, BayLibre Inc.
> + */
> +
> +#include <dt-bindings/phy/phy.h>
> +#include <linux/bitfield.h>
> +#include <linux/delay.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/phy/phy.h>
> +#include <linux/platform_device.h>
> +#include <linux/slab.h>
> +
> +#include "phy-mtk-io.h"
> +#include "phy-mtk-mipi-csi-0-5-rx-reg.h"
> +
> +#define CSIXB_OFFSET		0x1000
> +
> +struct mtk_mipi_cdphy_port {
> +	struct device *dev;
> +	void __iomem *base;
> +	struct phy *phy;
> +	u32 type;
> +	u32 mode;
> +	u32 num_lanes;
> +};
> +
> +enum PHY_TYPE {
> +	DPHY = 0,
> +	CPHY,
> +	CDPHY,
> +};
> +
> +static void mtk_phy_csi_cdphy_ana_eq_tune(void __iomem *base)
> +{
> +	mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI0A_L0_T0AB_EQ_IS, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI0A_L0_T0AB_EQ_BW, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI0A_L1_T1AB_EQ_IS, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI0A_L1_T1AB_EQ_BW, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA20_CSI0A,
> +			     RG_CSI0A_L2_T1BC_EQ_IS, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA20_CSI0A,
> +			     RG_CSI0A_L2_T1BC_EQ_BW, 1);

single line would be better (less than 100)

> +
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI0A_L0_T0AB_EQ_IS, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI0A_L0_T0AB_EQ_BW, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI0A_L1_T1AB_EQ_IS, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI0A_L1_T1AB_EQ_BW, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA20_CSI0A,
> +			     RG_CSI0A_L2_T1BC_EQ_IS, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA20_CSI0A,
> +			     RG_CSI0A_L2_T1BC_EQ_BW, 1);
> +}
> +
> +static void mtk_phy_csi_dphy_ana_eq_tune(void __iomem *base)
> +{
> +	mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L0_EQ_IS, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L0_EQ_BW, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L1_EQ_IS, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L1_EQ_BW, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI1A_L2_EQ_IS, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI1A_L2_EQ_BW, 1);
> +
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L0_EQ_IS, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L0_EQ_BW, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L1_EQ_IS, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA18_CSIXA,
> +			     RG_CSI1A_L1_EQ_BW, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI1A_L2_EQ_IS, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA1C_CSIXA,
> +			     RG_CSI1A_L2_EQ_BW, 1);
> +}
> +
> +static int mtk_mipi_phy_power_on(struct phy *phy)
> +{
> +	struct mtk_mipi_cdphy_port *port = phy_get_drvdata(phy);
> +	void __iomem *base = port->base;
> +
> +	/*
> +	 * The driver currently supports DPHY and CD-PHY phys,
> +	 * but the only mode supported is DPHY,
> +	 * so CD-PHY capable phys must be configured in DPHY mode
> +	 */
> +	if (port->type == CDPHY) {
> +		mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +				     RG_CSI0A_CPHY_EN, 0);
> +		mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +				     RG_CSI0A_CPHY_EN, 0);
> +	}
> +
> +	/*
> +	 * Lane configuration:
> +	 *
> +	 * Only 4 data + 1 clock is supported for now with the following mapping:
> +	 *
> +	 * CSIXA_LNR0 --> D2
> +	 * CSIXA_LNR1 --> D0
> +	 * CSIXA_LNR2 --> C
> +	 * CSIXB_LNR0 --> D1
> +	 * CSIXB_LNR1 --> D3
> +	 */
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L0_CKMODE_EN, 0);
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L0_CKSEL, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L1_CKMODE_EN, 0);
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L1_CKSEL, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L2_CKMODE_EN, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L2_CKSEL, 1);
> +
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L0_CKMODE_EN, 0);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L0_CKSEL, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L1_CKMODE_EN, 0);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L1_CKSEL, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L2_CKMODE_EN, 0);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_DPHY_L2_CKSEL, 1);
> +
> +	/* Byte clock invert */
> +	mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIXA,
> +			     RG_CSIXA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIXA,
> +			     RG_CSIXA_DPHY_L1_BYTECK_INVERT, 1);
> +	mtk_phy_update_field(base + MIPI_RX_ANAA8_CSIXA,
> +			     RG_CSIXA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANAA8_CSIXA,
> +			     RG_CSIXA_CDPHY_L0_T0_BYTECK_INVERT, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANAA8_CSIXA,
> +			     RG_CSIXA_DPHY_L1_BYTECK_INVERT, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANAA8_CSIXA,
> +			     RG_CSIXA_CDPHY_L2_T1_BYTECK_INVERT, 1);
> +
> +	/* Start ANA EQ tuning */
> +	if (port->type == CDPHY)
> +		mtk_phy_csi_cdphy_ana_eq_tune(base);
> +	else
> +		mtk_phy_csi_dphy_ana_eq_tune(base);
> +
> +	/* End ANA EQ tuning */
> +	mtk_phy_set_bits(base + MIPI_RX_ANA40_CSIXA, 0x90);
> +
> +	mtk_phy_update_field(base + MIPI_RX_ANA24_CSIXA,
> +			     RG_CSIXA_RESERVE, 0x40);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA24_CSIXA,
> +			     RG_CSIXA_RESERVE, 0x40);
> +	mtk_phy_update_field(base + MIPI_RX_WRAPPER80_CSIXA,
> +			     CSR_CSI_RST_MODE, 0);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_WRAPPER80_CSIXA,
> +			     CSR_CSI_RST_MODE, 0);
> +	/* ANA power on */
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_CORE_EN, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_CORE_EN, 1);
> +	usleep_range(20, 40);
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_LPF_EN, 1);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_LPF_EN, 1);
> +
> +	return 0;
> +}
> +
> +static int mtk_mipi_phy_power_off(struct phy *phy)
> +{
> +	struct mtk_mipi_cdphy_port *port = phy_get_drvdata(phy);
> +	void __iomem *base = port->base;
> +
> +	/* Disable MIPI BG. */
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_CORE_EN, 0);
> +	mtk_phy_update_field(base + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_LPF_EN, 0);
> +
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_CORE_EN, 0);
> +	mtk_phy_update_field(base + CSIXB_OFFSET + MIPI_RX_ANA00_CSIXA,
> +			     RG_CSIXA_BG_LPF_EN, 0);
> +
> +	return 0;
> +}
> +
> +static struct phy *mtk_mipi_cdphy_xlate(struct device *dev,
> +					struct of_phandle_args *args)
> +{
> +	struct mtk_mipi_cdphy_port *priv = dev_get_drvdata(dev);
> +
> +	/*
> +	 * If PHY is CD-PHY then we need to get the operating mode
> +	 * For now only D-PHY mode is supported

D-PHY or CD-PHY??

> +	 */
> +	if (priv->type == CDPHY) {
> +		if (args->args_count != 1) {
> +			dev_err(dev, "invalid number of arguments\n");
> +			return ERR_PTR(-EINVAL);
> +		}
> +		switch (args->args[0]) {
> +		case PHY_TYPE_DPHY:
> +			priv->mode = DPHY;
> +			if (priv->num_lanes != 4) {
> +				dev_err(dev, "Only 4D1C mode is supported for now!\n");
> +				return ERR_PTR(-EINVAL);
> +			}
> +			break;
> +		default:
> +			dev_err(dev, "Unsupported PHY type: %i\n", args->args[0]);
> +			return ERR_PTR(-EINVAL);
> +		}
> +	} else {
> +		if (args->args_count) {
> +			dev_err(dev, "invalid number of arguments\n");
> +			return ERR_PTR(-EINVAL);
> +		}
> +		priv->mode = DPHY;
> +	}
> +
> +	return priv->phy;
> +}
> +
> +static const struct phy_ops mtk_cdphy_ops = {
> +	.power_on	= mtk_mipi_phy_power_on,
> +	.power_off	= mtk_mipi_phy_power_off,
> +	.owner		= THIS_MODULE,
> +};
> +
> +static int mtk_mipi_cdphy_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct phy_provider *phy_provider;
> +	struct mtk_mipi_cdphy_port *port;
> +	struct phy *phy;
> +	int ret;
> +	u32 phy_type;
> +
> +	port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
> +	if (!port)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, port);
> +
> +	port->dev = dev;
> +
> +	port->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(port->base))
> +		return PTR_ERR(port->base);
> +
> +	ret = of_property_read_u32(dev->of_node, "num-lanes", &port->num_lanes);
> +	if (ret) {
> +		dev_err(dev, "Failed to read num-lanes property: %i\n", ret);
> +		return ret;
> +	}
> +
> +	/*
> +	 * phy-type is optional, if not present, PHY is considered to be CD-PHY
> +	 */
> +	if (device_property_present(dev, "phy-type")) {
> +		ret = of_property_read_u32(dev->of_node, "phy-type", &phy_type);
> +		if (ret) {
> +			dev_err(dev, "Failed to read phy-type property: %i\n", ret);
> +			return ret;
> +		}
> +		switch (phy_type) {
> +		case PHY_TYPE_DPHY:
> +			port->type = DPHY;
> +			break;
> +		default:
> +			dev_err(dev, "Unsupported PHY type: %i\n", phy_type);
> +			return -EINVAL;
> +		}
> +	} else {
> +		port->type = CDPHY;
> +	}
> +
> +	phy = devm_phy_create(dev, NULL, &mtk_cdphy_ops);
> +	if (IS_ERR(phy)) {
> +		dev_err(dev, "Failed to create PHY: %ld\n", PTR_ERR(phy));
> +		return PTR_ERR(phy);
> +	}
> +
> +	port->phy = phy;
> +	phy_set_drvdata(phy, port);
> +
> +	phy_provider = devm_of_phy_provider_register(dev, mtk_mipi_cdphy_xlate);
> +	if (IS_ERR(phy_provider)) {
> +		dev_err(dev, "Failed to register PHY provider: %ld\n",
> +			PTR_ERR(phy_provider));
> +		return PTR_ERR(phy_provider);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id mtk_mipi_cdphy_of_match[] = {
> +	{ .compatible = "mediatek,mt8365-csi-rx" },
> +	{ /* sentinel */},
> +};
> +MODULE_DEVICE_TABLE(of, mtk_mipi_cdphy_of_match);
> +
> +static struct platform_driver mipi_cdphy_pdrv = {
> +	.probe = mtk_mipi_cdphy_probe,
> +	.driver	= {
> +		.name	= "mtk-mipi-csi-0-5",
> +		.of_match_table = mtk_mipi_cdphy_of_match,
> +	},
> +};
> +module_platform_driver(mipi_cdphy_pdrv);
> +
> +MODULE_DESCRIPTION("MediaTek MIPI CSI CD-PHY v0.5 Driver");
> +MODULE_AUTHOR("Louis Kuo <louis.kuo at mediatek.com>");
> +MODULE_LICENSE("GPL");
> -- 
> 2.41.0

-- 
~Vinod



More information about the linux-arm-kernel mailing list