[PATCH v2 4/4] arm64: dts: Add MediaTek MT8188 dts and evaluation board and Makefile

AngeloGioacchino Del Regno angelogioacchino.delregno at collabora.com
Tue Jul 11 01:45:23 PDT 2023


Il 11/07/23 04:39, Jason-ch Chen ha scritto:
> From: jason-ch chen <Jason-ch.Chen at mediatek.com>
> 
> MT8188 is a SoC based on 64bit ARMv8 architecture. It contains 6 CA55
> and 2 CA78 cores. MT8188 share many HW IP with MT65xx series.
> 
> We add basic chip support for MediaTek MT8188 on evaluation board.
> 
> Signed-off-by: jason-ch chen <Jason-ch.Chen at mediatek.com>
> ---
>   arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>   arch/arm64/boot/dts/mediatek/mt8188-evb.dts | 401 +++++++++
>   arch/arm64/boot/dts/mediatek/mt8188.dtsi    | 951 ++++++++++++++++++++
>   3 files changed, 1353 insertions(+)
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188-evb.dts
>   create mode 100644 arch/arm64/boot/dts/mediatek/mt8188.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index c99c3372a4b5..9bd2324259a3 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -44,6 +44,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku0.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-kukui-krane-sku176.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8186-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8188-evb.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-hayato-r1.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-asurada-spherion-r0.dtb
>   dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188-evb.dts b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> new file mode 100644
> index 000000000000..6c1e829f7df6
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8188-evb.dts
> @@ -0,0 +1,401 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (C) 2023 MediaTek Inc.
> + */
> +/dts-v1/;
> +#include "mt8188.dtsi"
> +#include "mt6359.dtsi"
> +
> +/ {

..snip..

> +
> +&u3phy0 {
> +	status="okay";

You missed the spaces around '=' here.

	status = "okay";

> +};
> +
> +&u3phy1 {
> +	status="okay";
> +};
> +
> +&u3phy2 {
> +	status="okay";
> +};
> +

After fixing that,

Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno at collabora.com>




More information about the linux-arm-kernel mailing list