[PATCH V13 - RESEND 06/10] arm64/perf: Enable branch stack events via FEAT_BRBE
Anshuman Khandual
anshuman.khandual at arm.com
Tue Jul 11 01:24:51 PDT 2023
This enables branch stack sampling events in ARMV8 PMU, via an architecture
feature FEAT_BRBE aka branch record buffer extension. This defines required
branch helper functions pmuv8pmu_branch_XXXXX() and the implementation here
is wrapped with a new config option CONFIG_ARM64_BRBE.
Cc: Catalin Marinas <catalin.marinas at arm.com>
Cc: Will Deacon <will at kernel.org>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
Tested-by: James Clark <james.clark at arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual at arm.com>
---
arch/arm64/include/asm/perf_event.h | 9 +
drivers/perf/Kconfig | 11 +
drivers/perf/Makefile | 1 +
drivers/perf/arm_brbe.c | 549 ++++++++++++++++++++++++++++
drivers/perf/arm_brbe.h | 257 +++++++++++++
drivers/perf/arm_pmuv3.c | 4 +
6 files changed, 831 insertions(+)
create mode 100644 drivers/perf/arm_brbe.c
create mode 100644 drivers/perf/arm_brbe.h
diff --git a/arch/arm64/include/asm/perf_event.h b/arch/arm64/include/asm/perf_event.h
index ebc392ba3559..49a973571415 100644
--- a/arch/arm64/include/asm/perf_event.h
+++ b/arch/arm64/include/asm/perf_event.h
@@ -31,6 +31,14 @@ struct perf_event;
#ifdef CONFIG_PERF_EVENTS
static inline bool has_branch_stack(struct perf_event *event);
+#ifdef CONFIG_ARM64_BRBE
+void armv8pmu_branch_read(struct pmu_hw_events *cpuc, struct perf_event *event);
+bool armv8pmu_branch_attr_valid(struct perf_event *event);
+void armv8pmu_branch_enable(struct perf_event *event);
+void armv8pmu_branch_disable(struct perf_event *event);
+void armv8pmu_branch_probe(struct arm_pmu *arm_pmu);
+void armv8pmu_branch_reset(void);
+#else
static inline void armv8pmu_branch_read(struct pmu_hw_events *cpuc, struct perf_event *event)
{
WARN_ON_ONCE(!has_branch_stack(event));
@@ -56,3 +64,4 @@ static inline void armv8pmu_branch_probe(struct arm_pmu *arm_pmu) { }
static inline void armv8pmu_branch_reset(void) { }
#endif
#endif
+#endif
diff --git a/drivers/perf/Kconfig b/drivers/perf/Kconfig
index f4572a5cca72..7c8448051741 100644
--- a/drivers/perf/Kconfig
+++ b/drivers/perf/Kconfig
@@ -180,6 +180,17 @@ config ARM_SPE_PMU
Extension, which provides periodic sampling of operations in
the CPU pipeline and reports this via the perf AUX interface.
+config ARM64_BRBE
+ bool "Enable support for Branch Record Buffer Extension (BRBE)"
+ depends on PERF_EVENTS && ARM64 && ARM_PMU
+ default y
+ help
+ Enable perf support for Branch Record Buffer Extension (BRBE) which
+ records all branches taken in an execution path. This supports some
+ branch types and privilege based filtering. It captured additional
+ relevant information such as cycle count, misprediction and branch
+ type, branch privilege level etc.
+
config ARM_DMC620_PMU
tristate "Enable PMU support for the ARM DMC-620 memory controller"
depends on (ARM64 && ACPI) || COMPILE_TEST
diff --git a/drivers/perf/Makefile b/drivers/perf/Makefile
index 16b3ec4db916..a8b7bc22e3d6 100644
--- a/drivers/perf/Makefile
+++ b/drivers/perf/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_RISCV_PMU_SBI) += riscv_pmu_sbi.o
obj-$(CONFIG_THUNDERX2_PMU) += thunderx2_pmu.o
obj-$(CONFIG_XGENE_PMU) += xgene_pmu.o
obj-$(CONFIG_ARM_SPE_PMU) += arm_spe_pmu.o
+obj-$(CONFIG_ARM64_BRBE) += arm_brbe.o
obj-$(CONFIG_ARM_DMC620_PMU) += arm_dmc620_pmu.o
obj-$(CONFIG_MARVELL_CN10K_TAD_PMU) += marvell_cn10k_tad_pmu.o
obj-$(CONFIG_MARVELL_CN10K_DDR_PMU) += marvell_cn10k_ddr_pmu.o
diff --git a/drivers/perf/arm_brbe.c b/drivers/perf/arm_brbe.c
new file mode 100644
index 000000000000..79106300cf2e
--- /dev/null
+++ b/drivers/perf/arm_brbe.c
@@ -0,0 +1,549 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Branch Record Buffer Extension Driver.
+ *
+ * Copyright (C) 2022 ARM Limited
+ *
+ * Author: Anshuman Khandual <anshuman.khandual at arm.com>
+ */
+#include "arm_brbe.h"
+
+static bool valid_brbe_nr(int brbe_nr)
+{
+ return brbe_nr == BRBIDR0_EL1_NUMREC_8 ||
+ brbe_nr == BRBIDR0_EL1_NUMREC_16 ||
+ brbe_nr == BRBIDR0_EL1_NUMREC_32 ||
+ brbe_nr == BRBIDR0_EL1_NUMREC_64;
+}
+
+static bool valid_brbe_cc(int brbe_cc)
+{
+ return brbe_cc == BRBIDR0_EL1_CC_20_BIT;
+}
+
+static bool valid_brbe_format(int brbe_format)
+{
+ return brbe_format == BRBIDR0_EL1_FORMAT_0;
+}
+
+static bool valid_brbe_version(int brbe_version)
+{
+ return brbe_version == ID_AA64DFR0_EL1_BRBE_IMP ||
+ brbe_version == ID_AA64DFR0_EL1_BRBE_BRBE_V1P1;
+}
+
+static void select_brbe_bank(int bank)
+{
+ u64 brbfcr;
+
+ WARN_ON(bank > BRBE_BANK_IDX_1);
+ brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
+ brbfcr &= ~BRBFCR_EL1_BANK_MASK;
+ brbfcr |= SYS_FIELD_PREP(BRBFCR_EL1, BANK, bank);
+ write_sysreg_s(brbfcr, SYS_BRBFCR_EL1);
+ isb();
+}
+
+/*
+ * Generic perf branch filters supported on BRBE
+ *
+ * New branch filters need to be evaluated whether they could be supported on
+ * BRBE. This ensures that such branch filters would not just be accepted, to
+ * fail silently. PERF_SAMPLE_BRANCH_HV is a special case that is selectively
+ * supported only on platforms where kernel is in hyp mode.
+ */
+#define BRBE_EXCLUDE_BRANCH_FILTERS (PERF_SAMPLE_BRANCH_ABORT_TX | \
+ PERF_SAMPLE_BRANCH_IN_TX | \
+ PERF_SAMPLE_BRANCH_NO_TX | \
+ PERF_SAMPLE_BRANCH_CALL_STACK)
+
+#define BRBE_ALLOWED_BRANCH_FILTERS (PERF_SAMPLE_BRANCH_USER | \
+ PERF_SAMPLE_BRANCH_KERNEL | \
+ PERF_SAMPLE_BRANCH_HV | \
+ PERF_SAMPLE_BRANCH_ANY | \
+ PERF_SAMPLE_BRANCH_ANY_CALL | \
+ PERF_SAMPLE_BRANCH_ANY_RETURN | \
+ PERF_SAMPLE_BRANCH_IND_CALL | \
+ PERF_SAMPLE_BRANCH_COND | \
+ PERF_SAMPLE_BRANCH_IND_JUMP | \
+ PERF_SAMPLE_BRANCH_CALL | \
+ PERF_SAMPLE_BRANCH_NO_FLAGS | \
+ PERF_SAMPLE_BRANCH_NO_CYCLES | \
+ PERF_SAMPLE_BRANCH_TYPE_SAVE | \
+ PERF_SAMPLE_BRANCH_HW_INDEX | \
+ PERF_SAMPLE_BRANCH_PRIV_SAVE)
+
+#define BRBE_PERF_BRANCH_FILTERS (BRBE_ALLOWED_BRANCH_FILTERS | \
+ BRBE_EXCLUDE_BRANCH_FILTERS)
+
+bool armv8pmu_branch_attr_valid(struct perf_event *event)
+{
+ u64 branch_type = event->attr.branch_sample_type;
+
+ /*
+ * Ensure both perf branch filter allowed and exclude
+ * masks are always in sync with the generic perf ABI.
+ */
+ BUILD_BUG_ON(BRBE_PERF_BRANCH_FILTERS != (PERF_SAMPLE_BRANCH_MAX - 1));
+
+ if (branch_type & ~BRBE_ALLOWED_BRANCH_FILTERS) {
+ pr_debug_once("requested branch filter not supported 0x%llx\n", branch_type);
+ return false;
+ }
+
+ /*
+ * If the event does not have at least one of the privilege
+ * branch filters as in PERF_SAMPLE_BRANCH_PLM_ALL, the core
+ * perf will adjust its value based on perf event's existing
+ * privilege level via attr.exclude_[user|kernel|hv].
+ *
+ * As event->attr.branch_sample_type might have been changed
+ * when the event reaches here, it is not possible to figure
+ * out whether the event originally had HV privilege request
+ * or got added via the core perf. Just report this situation
+ * once and continue ignoring if there are other instances.
+ */
+ if ((branch_type & PERF_SAMPLE_BRANCH_HV) && !is_kernel_in_hyp_mode())
+ pr_debug_once("hypervisor privilege filter not supported 0x%llx\n", branch_type);
+
+ return true;
+}
+
+static int brbe_attributes_probe(struct arm_pmu *armpmu, u32 brbe)
+{
+ u64 brbidr = read_sysreg_s(SYS_BRBIDR0_EL1);
+ int brbe_version, brbe_format, brbe_cc, brbe_nr;
+
+ brbe_version = brbe;
+ brbe_format = brbe_get_format(brbidr);
+ brbe_cc = brbe_get_cc_bits(brbidr);
+ brbe_nr = brbe_get_numrec(brbidr);
+ armpmu->reg_brbidr = brbidr;
+
+ if (!valid_brbe_version(brbe_version) ||
+ !valid_brbe_format(brbe_format) ||
+ !valid_brbe_cc(brbe_cc) ||
+ !valid_brbe_nr(brbe_nr))
+ return -EOPNOTSUPP;
+ return 0;
+}
+
+void armv8pmu_branch_probe(struct arm_pmu *armpmu)
+{
+ u64 aa64dfr0 = read_sysreg_s(SYS_ID_AA64DFR0_EL1);
+ u32 brbe;
+
+ brbe = cpuid_feature_extract_unsigned_field(aa64dfr0, ID_AA64DFR0_EL1_BRBE_SHIFT);
+ if (!brbe)
+ return;
+
+ if (brbe_attributes_probe(armpmu, brbe))
+ return;
+
+ armpmu->has_branch_stack = 1;
+}
+
+static u64 branch_type_to_brbfcr(int branch_type)
+{
+ u64 brbfcr = 0;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_ANY) {
+ brbfcr |= BRBFCR_EL1_BRANCH_FILTERS;
+ return brbfcr;
+ }
+
+ if (branch_type & PERF_SAMPLE_BRANCH_ANY_CALL) {
+ brbfcr |= BRBFCR_EL1_INDCALL;
+ brbfcr |= BRBFCR_EL1_DIRCALL;
+ }
+
+ if (branch_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
+ brbfcr |= BRBFCR_EL1_RTN;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_IND_CALL)
+ brbfcr |= BRBFCR_EL1_INDCALL;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_COND)
+ brbfcr |= BRBFCR_EL1_CONDDIR;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_IND_JUMP)
+ brbfcr |= BRBFCR_EL1_INDIRECT;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_CALL)
+ brbfcr |= BRBFCR_EL1_DIRCALL;
+
+ return brbfcr;
+}
+
+static u64 branch_type_to_brbcr(int branch_type)
+{
+ u64 brbcr = BRBCR_EL1_DEFAULT_TS;
+
+ /*
+ * BRBE should be paused on PMU interrupt while tracing kernel
+ * space to stop capturing further branch records. Otherwise
+ * interrupt handler branch records might get into the samples
+ * which is not desired.
+ *
+ * BRBE need not be paused on PMU interrupt while tracing only
+ * the user space, because it will automatically be inside the
+ * prohibited region. But even after PMU overflow occurs, the
+ * interrupt could still take much more cycles, before it can
+ * be taken and by that time BRBE will have been overwritten.
+ * Hence enable pause on PMU interrupt mechanism even for user
+ * only traces as well.
+ */
+ brbcr |= BRBCR_EL1_FZP;
+
+ /*
+ * When running in the hyp mode, writing into BRBCR_EL1
+ * actually writes into BRBCR_EL2 instead. Field E2BRE
+ * is also at the same position as E1BRE.
+ */
+ if (branch_type & PERF_SAMPLE_BRANCH_USER)
+ brbcr |= BRBCR_EL1_E0BRE;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_KERNEL)
+ brbcr |= BRBCR_EL1_E1BRE;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_HV) {
+ if (is_kernel_in_hyp_mode())
+ brbcr |= BRBCR_EL1_E1BRE;
+ }
+
+ if (!(branch_type & PERF_SAMPLE_BRANCH_NO_CYCLES))
+ brbcr |= BRBCR_EL1_CC;
+
+ if (!(branch_type & PERF_SAMPLE_BRANCH_NO_FLAGS))
+ brbcr |= BRBCR_EL1_MPRED;
+
+ /*
+ * The exception and exception return branches could be
+ * captured, irrespective of the perf event's privilege.
+ * If the perf event does not have enough privilege for
+ * a given exception level, then addresses which falls
+ * under that exception level will be reported as zero
+ * for the captured branch record, creating source only
+ * or target only records.
+ */
+ if (branch_type & PERF_SAMPLE_BRANCH_ANY) {
+ brbcr |= BRBCR_EL1_EXCEPTION;
+ brbcr |= BRBCR_EL1_ERTN;
+ }
+
+ if (branch_type & PERF_SAMPLE_BRANCH_ANY_CALL)
+ brbcr |= BRBCR_EL1_EXCEPTION;
+
+ if (branch_type & PERF_SAMPLE_BRANCH_ANY_RETURN)
+ brbcr |= BRBCR_EL1_ERTN;
+
+ return brbcr & BRBCR_EL1_DEFAULT_CONFIG;
+}
+
+void armv8pmu_branch_enable(struct perf_event *event)
+{
+ u64 branch_type = event->attr.branch_sample_type;
+ u64 brbfcr, brbcr;
+
+ brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
+ brbfcr &= ~BRBFCR_EL1_DEFAULT_CONFIG;
+ brbfcr |= branch_type_to_brbfcr(branch_type);
+ write_sysreg_s(brbfcr, SYS_BRBFCR_EL1);
+ isb();
+
+ brbcr = read_sysreg_s(SYS_BRBCR_EL1);
+ brbcr &= ~BRBCR_EL1_DEFAULT_CONFIG;
+ brbcr |= branch_type_to_brbcr(branch_type);
+ write_sysreg_s(brbcr, SYS_BRBCR_EL1);
+ isb();
+ armv8pmu_branch_reset();
+}
+
+void armv8pmu_branch_disable(struct perf_event *event)
+{
+ u64 brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
+ u64 brbcr = read_sysreg_s(SYS_BRBCR_EL1);
+
+ brbcr &= ~(BRBCR_EL1_E0BRE | BRBCR_EL1_E1BRE);
+ brbfcr |= BRBFCR_EL1_PAUSED;
+ write_sysreg_s(brbcr, SYS_BRBCR_EL1);
+ write_sysreg_s(brbfcr, SYS_BRBFCR_EL1);
+ isb();
+}
+
+static void brbe_set_perf_entry_type(struct perf_branch_entry *entry, u64 brbinf)
+{
+ int brbe_type = brbe_get_type(brbinf);
+
+ switch (brbe_type) {
+ case BRBINFx_EL1_TYPE_UNCOND_DIRECT:
+ entry->type = PERF_BR_UNCOND;
+ break;
+ case BRBINFx_EL1_TYPE_INDIRECT:
+ entry->type = PERF_BR_IND;
+ break;
+ case BRBINFx_EL1_TYPE_DIRECT_LINK:
+ entry->type = PERF_BR_CALL;
+ break;
+ case BRBINFx_EL1_TYPE_INDIRECT_LINK:
+ entry->type = PERF_BR_IND_CALL;
+ break;
+ case BRBINFx_EL1_TYPE_RET:
+ entry->type = PERF_BR_RET;
+ break;
+ case BRBINFx_EL1_TYPE_COND_DIRECT:
+ entry->type = PERF_BR_COND;
+ break;
+ case BRBINFx_EL1_TYPE_CALL:
+ entry->type = PERF_BR_CALL;
+ break;
+ case BRBINFx_EL1_TYPE_TRAP:
+ entry->type = PERF_BR_SYSCALL;
+ break;
+ case BRBINFx_EL1_TYPE_ERET:
+ entry->type = PERF_BR_ERET;
+ break;
+ case BRBINFx_EL1_TYPE_IRQ:
+ entry->type = PERF_BR_IRQ;
+ break;
+ case BRBINFx_EL1_TYPE_DEBUG_HALT:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_ARM64_DEBUG_HALT;
+ break;
+ case BRBINFx_EL1_TYPE_SERROR:
+ entry->type = PERF_BR_SERROR;
+ break;
+ case BRBINFx_EL1_TYPE_INSN_DEBUG:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_ARM64_DEBUG_INST;
+ break;
+ case BRBINFx_EL1_TYPE_DATA_DEBUG:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_ARM64_DEBUG_DATA;
+ break;
+ case BRBINFx_EL1_TYPE_ALIGN_FAULT:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_NEW_FAULT_ALGN;
+ break;
+ case BRBINFx_EL1_TYPE_INSN_FAULT:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_NEW_FAULT_INST;
+ break;
+ case BRBINFx_EL1_TYPE_DATA_FAULT:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_NEW_FAULT_DATA;
+ break;
+ case BRBINFx_EL1_TYPE_FIQ:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_ARM64_FIQ;
+ break;
+ case BRBINFx_EL1_TYPE_DEBUG_EXIT:
+ entry->type = PERF_BR_EXTEND_ABI;
+ entry->new_type = PERF_BR_ARM64_DEBUG_EXIT;
+ break;
+ default:
+ pr_warn_once("%d - unknown branch type captured\n", brbe_type);
+ entry->type = PERF_BR_UNKNOWN;
+ break;
+ }
+}
+
+static int brbe_get_perf_priv(u64 brbinf)
+{
+ int brbe_el = brbe_get_el(brbinf);
+
+ switch (brbe_el) {
+ case BRBINFx_EL1_EL_EL0:
+ return PERF_BR_PRIV_USER;
+ case BRBINFx_EL1_EL_EL1:
+ return PERF_BR_PRIV_KERNEL;
+ case BRBINFx_EL1_EL_EL2:
+ if (is_kernel_in_hyp_mode())
+ return PERF_BR_PRIV_KERNEL;
+ return PERF_BR_PRIV_HV;
+ default:
+ pr_warn_once("%d - unknown branch privilege captured\n", brbe_el);
+ return PERF_BR_PRIV_UNKNOWN;
+ }
+}
+
+static void capture_brbe_flags(struct perf_branch_entry *entry, struct perf_event *event,
+ u64 brbinf)
+{
+ if (branch_sample_type(event))
+ brbe_set_perf_entry_type(entry, brbinf);
+
+ if (!branch_sample_no_cycles(event))
+ entry->cycles = brbe_get_cycles(brbinf);
+
+ if (!branch_sample_no_flags(event)) {
+ /*
+ * BRBINFx_EL1.LASTFAILED indicates that a TME transaction failed (or
+ * was cancelled) prior to this record, and some number of records
+ * prior to this one, may have been generated during an attempt to
+ * execute the transaction.
+ *
+ * We will remove such entries later in process_branch_aborts().
+ */
+ entry->abort = brbe_get_lastfailed(brbinf);
+
+ /*
+ * All these information (i.e transaction state and mispredicts)
+ * are available for source only and complete branch records.
+ */
+ if (brbe_record_is_complete(brbinf) ||
+ brbe_record_is_source_only(brbinf)) {
+ entry->mispred = brbe_get_mispredict(brbinf);
+ entry->predicted = !entry->mispred;
+ entry->in_tx = brbe_get_in_tx(brbinf);
+ }
+ }
+
+ if (branch_sample_priv(event)) {
+ /*
+ * All these information (i.e branch privilege level) are
+ * available for target only and complete branch records.
+ */
+ if (brbe_record_is_complete(brbinf) ||
+ brbe_record_is_target_only(brbinf))
+ entry->priv = brbe_get_perf_priv(brbinf);
+ }
+}
+
+/*
+ * A branch record with BRBINFx_EL1.LASTFAILED set, implies that all
+ * preceding consecutive branch records, that were in a transaction
+ * (i.e their BRBINFx_EL1.TX set) have been aborted.
+ *
+ * Similarly BRBFCR_EL1.LASTFAILED set, indicate that all preceding
+ * consecutive branch records up to the last record, which were in a
+ * transaction (i.e their BRBINFx_EL1.TX set) have been aborted.
+ *
+ * --------------------------------- -------------------
+ * | 00 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX success]
+ * --------------------------------- -------------------
+ * | 01 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX success]
+ * --------------------------------- -------------------
+ * | 02 | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 0 |
+ * --------------------------------- -------------------
+ * | 03 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
+ * --------------------------------- -------------------
+ * | 04 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
+ * --------------------------------- -------------------
+ * | 05 | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 1 |
+ * --------------------------------- -------------------
+ * | .. | BRBSRC | BRBTGT | BRBINF | | TX = 0 | LF = 0 |
+ * --------------------------------- -------------------
+ * | 61 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
+ * --------------------------------- -------------------
+ * | 62 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
+ * --------------------------------- -------------------
+ * | 63 | BRBSRC | BRBTGT | BRBINF | | TX = 1 | LF = 0 | [TX failed]
+ * --------------------------------- -------------------
+ *
+ * BRBFCR_EL1.LASTFAILED == 1
+ *
+ * BRBFCR_EL1.LASTFAILED fails all those consecutive, in transaction
+ * branches records near the end of the BRBE buffer.
+ *
+ * Architecture does not guarantee a non transaction (TX = 0) branch
+ * record between two different transactions. So it is possible that
+ * a subsequent lastfailed record (TX = 0, LF = 1) might erroneously
+ * mark more than required transactions as aborted.
+ */
+static void process_branch_aborts(struct pmu_hw_events *cpuc)
+{
+ u64 brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
+ bool lastfailed = !!(brbfcr & BRBFCR_EL1_LASTFAILED);
+ int idx = brbe_get_numrec(cpuc->percpu_pmu->reg_brbidr) - 1;
+ struct perf_branch_entry *entry;
+
+ do {
+ entry = &cpuc->branches->branch_entries[idx];
+ if (entry->in_tx) {
+ entry->abort = lastfailed;
+ } else {
+ lastfailed = entry->abort;
+ entry->abort = false;
+ }
+ } while (idx--, idx >= 0);
+}
+
+void armv8pmu_branch_reset(void)
+{
+ asm volatile(BRB_IALL);
+ isb();
+}
+
+static bool capture_branch_entry(struct pmu_hw_events *cpuc,
+ struct perf_event *event, int idx)
+{
+ struct perf_branch_entry *entry = &cpuc->branches->branch_entries[idx];
+ u64 brbinf = get_brbinf_reg(idx);
+
+ /*
+ * There are no valid entries anymore on the buffer.
+ * Abort the branch record processing to save some
+ * cycles and also reduce the capture/process load
+ * for the user space as well.
+ */
+ if (brbe_invalid(brbinf))
+ return false;
+
+ perf_clear_branch_entry_bitfields(entry);
+ if (brbe_record_is_complete(brbinf)) {
+ entry->from = get_brbsrc_reg(idx);
+ entry->to = get_brbtgt_reg(idx);
+ } else if (brbe_record_is_source_only(brbinf)) {
+ entry->from = get_brbsrc_reg(idx);
+ entry->to = 0;
+ } else if (brbe_record_is_target_only(brbinf)) {
+ entry->from = 0;
+ entry->to = get_brbtgt_reg(idx);
+ }
+ capture_brbe_flags(entry, event, brbinf);
+ return true;
+}
+
+void armv8pmu_branch_read(struct pmu_hw_events *cpuc, struct perf_event *event)
+{
+ int nr_hw_entries = brbe_get_numrec(cpuc->percpu_pmu->reg_brbidr);
+ u64 brbfcr, brbcr;
+ int idx = 0;
+
+ brbcr = read_sysreg_s(SYS_BRBCR_EL1);
+ brbfcr = read_sysreg_s(SYS_BRBFCR_EL1);
+
+ /* Ensure pause on PMU interrupt is enabled */
+ WARN_ON_ONCE(!(brbcr & BRBCR_EL1_FZP));
+
+ /* Pause the buffer */
+ write_sysreg_s(brbfcr | BRBFCR_EL1_PAUSED, SYS_BRBFCR_EL1);
+ isb();
+
+ /* Loop through bank 0 */
+ select_brbe_bank(BRBE_BANK_IDX_0);
+ while (idx < nr_hw_entries && idx <= BRBE_BANK0_IDX_MAX) {
+ if (!capture_branch_entry(cpuc, event, idx))
+ goto skip_bank_1;
+ idx++;
+ }
+
+ /* Loop through bank 1 */
+ select_brbe_bank(BRBE_BANK_IDX_1);
+ while (idx < nr_hw_entries && idx <= BRBE_BANK1_IDX_MAX) {
+ if (!capture_branch_entry(cpuc, event, idx))
+ break;
+ idx++;
+ }
+
+skip_bank_1:
+ cpuc->branches->branch_stack.nr = idx;
+ cpuc->branches->branch_stack.hw_idx = -1ULL;
+ process_branch_aborts(cpuc);
+
+ /* Unpause the buffer */
+ write_sysreg_s(brbfcr & ~BRBFCR_EL1_PAUSED, SYS_BRBFCR_EL1);
+ isb();
+ armv8pmu_branch_reset();
+}
diff --git a/drivers/perf/arm_brbe.h b/drivers/perf/arm_brbe.h
new file mode 100644
index 000000000000..a47480eec070
--- /dev/null
+++ b/drivers/perf/arm_brbe.h
@@ -0,0 +1,257 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Branch Record Buffer Extension Helpers.
+ *
+ * Copyright (C) 2022 ARM Limited
+ *
+ * Author: Anshuman Khandual <anshuman.khandual at arm.com>
+ */
+#define pr_fmt(fmt) "brbe: " fmt
+
+#include <linux/perf/arm_pmu.h>
+
+#define BRBFCR_EL1_BRANCH_FILTERS (BRBFCR_EL1_DIRECT | \
+ BRBFCR_EL1_INDIRECT | \
+ BRBFCR_EL1_RTN | \
+ BRBFCR_EL1_INDCALL | \
+ BRBFCR_EL1_DIRCALL | \
+ BRBFCR_EL1_CONDDIR)
+
+#define BRBFCR_EL1_DEFAULT_CONFIG (BRBFCR_EL1_BANK_MASK | \
+ BRBFCR_EL1_PAUSED | \
+ BRBFCR_EL1_EnI | \
+ BRBFCR_EL1_BRANCH_FILTERS)
+
+/*
+ * BRBTS_EL1 is currently not used for branch stack implementation
+ * purpose but BRBCR_EL1.TS needs to have a valid value from all
+ * available options. BRBCR_EL1_TS_VIRTUAL is selected for this.
+ */
+#define BRBCR_EL1_DEFAULT_TS FIELD_PREP(BRBCR_EL1_TS_MASK, BRBCR_EL1_TS_VIRTUAL)
+
+#define BRBCR_EL1_DEFAULT_CONFIG (BRBCR_EL1_EXCEPTION | \
+ BRBCR_EL1_ERTN | \
+ BRBCR_EL1_CC | \
+ BRBCR_EL1_MPRED | \
+ BRBCR_EL1_E1BRE | \
+ BRBCR_EL1_E0BRE | \
+ BRBCR_EL1_FZP | \
+ BRBCR_EL1_DEFAULT_TS)
+/*
+ * BRBE Instructions
+ *
+ * BRB_IALL : Invalidate the entire buffer
+ * BRB_INJ : Inject latest branch record derived from [BRBSRCINJ, BRBTGTINJ, BRBINFINJ]
+ */
+#define BRB_IALL __emit_inst(0xD5000000 | sys_insn(1, 1, 7, 2, 4) | (0x1f))
+#define BRB_INJ __emit_inst(0xD5000000 | sys_insn(1, 1, 7, 2, 5) | (0x1f))
+
+/*
+ * BRBE Buffer Organization
+ *
+ * BRBE buffer is arranged as multiple banks of 32 branch record
+ * entries each. An individual branch record in a given bank could
+ * be accessed, after selecting the bank in BRBFCR_EL1.BANK and
+ * accessing the registers i.e [BRBSRC, BRBTGT, BRBINF] set with
+ * indices [0..31].
+ *
+ * Bank 0
+ *
+ * --------------------------------- ------
+ * | 00 | BRBSRC | BRBTGT | BRBINF | | 00 |
+ * --------------------------------- ------
+ * | 01 | BRBSRC | BRBTGT | BRBINF | | 01 |
+ * --------------------------------- ------
+ * | .. | BRBSRC | BRBTGT | BRBINF | | .. |
+ * --------------------------------- ------
+ * | 31 | BRBSRC | BRBTGT | BRBINF | | 31 |
+ * --------------------------------- ------
+ *
+ * Bank 1
+ *
+ * --------------------------------- ------
+ * | 32 | BRBSRC | BRBTGT | BRBINF | | 00 |
+ * --------------------------------- ------
+ * | 33 | BRBSRC | BRBTGT | BRBINF | | 01 |
+ * --------------------------------- ------
+ * | .. | BRBSRC | BRBTGT | BRBINF | | .. |
+ * --------------------------------- ------
+ * | 63 | BRBSRC | BRBTGT | BRBINF | | 31 |
+ * --------------------------------- ------
+ */
+#define BRBE_BANK_MAX_ENTRIES 32
+
+#define BRBE_BANK0_IDX_MIN 0
+#define BRBE_BANK0_IDX_MAX 31
+#define BRBE_BANK1_IDX_MIN 32
+#define BRBE_BANK1_IDX_MAX 63
+
+struct brbe_hw_attr {
+ int brbe_version;
+ int brbe_cc;
+ int brbe_nr;
+ int brbe_format;
+};
+
+enum brbe_bank_idx {
+ BRBE_BANK_IDX_INVALID = -1,
+ BRBE_BANK_IDX_0,
+ BRBE_BANK_IDX_1,
+ BRBE_BANK_IDX_MAX
+};
+
+#define RETURN_READ_BRBSRCN(n) \
+ read_sysreg_s(SYS_BRBSRC##n##_EL1)
+
+#define RETURN_READ_BRBTGTN(n) \
+ read_sysreg_s(SYS_BRBTGT##n##_EL1)
+
+#define RETURN_READ_BRBINFN(n) \
+ read_sysreg_s(SYS_BRBINF##n##_EL1)
+
+#define BRBE_REGN_CASE(n, case_macro) \
+ case n: return case_macro(n); break
+
+#define BRBE_REGN_SWITCH(x, case_macro) \
+ do { \
+ switch (x) { \
+ BRBE_REGN_CASE(0, case_macro); \
+ BRBE_REGN_CASE(1, case_macro); \
+ BRBE_REGN_CASE(2, case_macro); \
+ BRBE_REGN_CASE(3, case_macro); \
+ BRBE_REGN_CASE(4, case_macro); \
+ BRBE_REGN_CASE(5, case_macro); \
+ BRBE_REGN_CASE(6, case_macro); \
+ BRBE_REGN_CASE(7, case_macro); \
+ BRBE_REGN_CASE(8, case_macro); \
+ BRBE_REGN_CASE(9, case_macro); \
+ BRBE_REGN_CASE(10, case_macro); \
+ BRBE_REGN_CASE(11, case_macro); \
+ BRBE_REGN_CASE(12, case_macro); \
+ BRBE_REGN_CASE(13, case_macro); \
+ BRBE_REGN_CASE(14, case_macro); \
+ BRBE_REGN_CASE(15, case_macro); \
+ BRBE_REGN_CASE(16, case_macro); \
+ BRBE_REGN_CASE(17, case_macro); \
+ BRBE_REGN_CASE(18, case_macro); \
+ BRBE_REGN_CASE(19, case_macro); \
+ BRBE_REGN_CASE(20, case_macro); \
+ BRBE_REGN_CASE(21, case_macro); \
+ BRBE_REGN_CASE(22, case_macro); \
+ BRBE_REGN_CASE(23, case_macro); \
+ BRBE_REGN_CASE(24, case_macro); \
+ BRBE_REGN_CASE(25, case_macro); \
+ BRBE_REGN_CASE(26, case_macro); \
+ BRBE_REGN_CASE(27, case_macro); \
+ BRBE_REGN_CASE(28, case_macro); \
+ BRBE_REGN_CASE(29, case_macro); \
+ BRBE_REGN_CASE(30, case_macro); \
+ BRBE_REGN_CASE(31, case_macro); \
+ default: \
+ pr_warn("unknown register index\n"); \
+ return -1; \
+ } \
+ } while (0)
+
+static inline int buffer_to_brbe_idx(int buffer_idx)
+{
+ return buffer_idx % BRBE_BANK_MAX_ENTRIES;
+}
+
+static inline u64 get_brbsrc_reg(int buffer_idx)
+{
+ int brbe_idx = buffer_to_brbe_idx(buffer_idx);
+
+ BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBSRCN);
+}
+
+static inline u64 get_brbtgt_reg(int buffer_idx)
+{
+ int brbe_idx = buffer_to_brbe_idx(buffer_idx);
+
+ BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBTGTN);
+}
+
+static inline u64 get_brbinf_reg(int buffer_idx)
+{
+ int brbe_idx = buffer_to_brbe_idx(buffer_idx);
+
+ BRBE_REGN_SWITCH(brbe_idx, RETURN_READ_BRBINFN);
+}
+
+static inline u64 brbe_record_valid(u64 brbinf)
+{
+ return FIELD_GET(BRBINFx_EL1_VALID_MASK, brbinf);
+}
+
+static inline bool brbe_invalid(u64 brbinf)
+{
+ return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_NONE;
+}
+
+static inline bool brbe_record_is_complete(u64 brbinf)
+{
+ return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_FULL;
+}
+
+static inline bool brbe_record_is_source_only(u64 brbinf)
+{
+ return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_SOURCE;
+}
+
+static inline bool brbe_record_is_target_only(u64 brbinf)
+{
+ return brbe_record_valid(brbinf) == BRBINFx_EL1_VALID_TARGET;
+}
+
+static inline int brbe_get_in_tx(u64 brbinf)
+{
+ return FIELD_GET(BRBINFx_EL1_T_MASK, brbinf);
+}
+
+static inline int brbe_get_mispredict(u64 brbinf)
+{
+ return FIELD_GET(BRBINFx_EL1_MPRED_MASK, brbinf);
+}
+
+static inline int brbe_get_lastfailed(u64 brbinf)
+{
+ return FIELD_GET(BRBINFx_EL1_LASTFAILED_MASK, brbinf);
+}
+
+static inline int brbe_get_cycles(u64 brbinf)
+{
+ /*
+ * Captured cycle count is unknown and hence
+ * should not be passed on to the user space.
+ */
+ if (brbinf & BRBINFx_EL1_CCU)
+ return 0;
+
+ return FIELD_GET(BRBINFx_EL1_CC_MASK, brbinf);
+}
+
+static inline int brbe_get_type(u64 brbinf)
+{
+ return FIELD_GET(BRBINFx_EL1_TYPE_MASK, brbinf);
+}
+
+static inline int brbe_get_el(u64 brbinf)
+{
+ return FIELD_GET(BRBINFx_EL1_EL_MASK, brbinf);
+}
+
+static inline int brbe_get_numrec(u64 brbidr)
+{
+ return FIELD_GET(BRBIDR0_EL1_NUMREC_MASK, brbidr);
+}
+
+static inline int brbe_get_format(u64 brbidr)
+{
+ return FIELD_GET(BRBIDR0_EL1_FORMAT_MASK, brbidr);
+}
+
+static inline int brbe_get_cc_bits(u64 brbidr)
+{
+ return FIELD_GET(BRBIDR0_EL1_CC_MASK, brbidr);
+}
diff --git a/drivers/perf/arm_pmuv3.c b/drivers/perf/arm_pmuv3.c
index 10bbe02f4079..7c9e9045c24e 100644
--- a/drivers/perf/arm_pmuv3.c
+++ b/drivers/perf/arm_pmuv3.c
@@ -813,6 +813,10 @@ static irqreturn_t armv8pmu_handle_irq(struct arm_pmu *cpu_pmu)
if (!armpmu_event_set_period(event))
continue;
+ /*
+ * PMU IRQ should remain asserted until all branch records
+ * are captured and processed into struct perf_sample_data.
+ */
if (has_branch_stack(event) && !WARN_ON(!cpuc->branches)) {
armv8pmu_branch_read(cpuc, event);
perf_sample_save_brstack(&data, event, &cpuc->branches->branch_stack);
--
2.25.1
More information about the linux-arm-kernel
mailing list