[PATCH v3 0/7] phy-rockchip-inno-usb2: add RK3588 support

[Vinod Koul]

On Mon, 22 May 2023 19:03:17 +0200, Sebastian Reichel wrote:
> This adds RK3588 to the Rockchip Inno USB2 PHY driver. The RK3588 has four of
> them. Two are used for USB2 and two are used by USB3 controllers (for USB2
> fallback mode). All of them can be used with this patchset.
> 
> Changes since PATCHv2:
>  * https://lore.kernel.org/linux-phy/20230403202307.120562-1-sebastian.reichel@collabora.com/
>  * Dropped patch adding the syscon compatible to the DT binding (applied by Heiko)
>  * Collected Reviewed-by from Rob Herring for DT binding patch (DT binding)
>  * Rebased to v6.4-rc1
>  * Removed superfluous init found by Vinod Koul
>  * Added one additional patch improving the error message for missing phy-config
>  * Fixed address_cells=2 code to not break the PHY at offset 0. I didn't notice it with the
>    previous versions, since that PHY is used for USB3 on Rockchip evaluation board and I
>    only started working on that recently.
> 
> [...]

Applied, thanks!

[1/7] dt-bindings: phy: rockchip,inno-usb2phy: add rk3588
      commit: 26720f89ee6878ef505812e852a3e914b7cbfe44
[2/7] phy: phy-rockchip-inno-usb2: add rk3588 support
      commit: 52b99b871eb79637342660b46c900642483d4412
[3/7] phy: phy-rockchip-inno-usb2: add reset support
      commit: 44d88aa9ae81c79ccc47ba4ef85aeda968bc4a50
[4/7] phy: phy-rockchip-inno-usb2: add rk3588 phy tuning support
      commit: 7d508a92e4588a59b909e235667d515051dd5955
[5/7] phy: phy-rockchip-inno-usb2: simplify phy clock handling
      commit: f4ca578b9803601074ab0d9e366b5fcda504e5a6
[6/7] phy: phy-rockchip-inno-usb2: simplify getting match data
      commit: 2e5ead8478e8e4a7b3d63a2001c2f0022b2f5e1b
[7/7] phy: phy-rockchip-inno-usb2: improve error message
      commit: e7254a4a7c444fa194440fa8dc73c7728e927162

Best regards,
-- 
~Vinod