[PATCH 05/10] firewall: introduce stm32_firewall framework

[Gatien CHEVALLIER]

Hello Greg,

On 7/7/23 12:37, Greg KH wrote:
> On Wed, Jul 05, 2023 at 07:27:54PM +0200, Gatien Chevallier wrote:
>> Introduce a firewall framework that offers to firewall consumers different
>> firewall services such as the ability to check their access rights against
>> their firewall controller(s).
>>
>> The firewall framework offers a generic API that is defined in firewall
>> controllers drivers to best fit the specificity of each firewall.
> 
> But you aren't defining a "generic" api here, you are defining a
> specific one for your specific hardware.
> 
> Or am I missing something?
> 

This framework is indeed ST-oriented, I should have specified :
"...offers a generic API for STM32 firewall controllers that is defined
in their drivers...". Will change in V2

>>
>> There are various types of firewalls:
>> -Peripheral firewalls that filter accesses to peripherals
>> -Memory firewalls that filter accesses to memories or memory regions
>> -Resource firewalls that filter accesses to internal resources such as
>> reset and clock controllers
>>
>> A firewall controller must be probed at arch_initcall level and register
>> to the framework so that consumers can use their services.
> 
> Why must it happen at arch_initcall?  So it can never be a module?  That
> feels wrong.
> 

Rob asked the same question.

I responded under his comment, I'm not quite sure how to handle it with
fw_devlink for dependencies with drivers that are probed at early init
levels.

>>
>> Signed-off-by: Gatien Chevallier <gatien.chevallier at foss.st.com>
>> ---
>>   MAINTAINERS                               |   5 +
>>   arch/arm64/Kconfig.platforms              |   1 +
>>   drivers/bus/Kconfig                       |  10 +
>>   drivers/bus/Makefile                      |   1 +
>>   drivers/bus/stm32_firewall.c              | 252 ++++++++++++++++++++++
>>   drivers/bus/stm32_firewall.h              |  83 +++++++
>>   include/linux/bus/stm32_firewall_device.h | 134 ++++++++++++
>>   7 files changed, 486 insertions(+)
>>   create mode 100644 drivers/bus/stm32_firewall.c
>>   create mode 100644 drivers/bus/stm32_firewall.h
>>   create mode 100644 include/linux/bus/stm32_firewall_device.h
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 41385f01fa98..fabf95ba9b86 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -20123,6 +20123,11 @@ T:	git git://linuxtv.org/media_tree.git
>>   F:	Documentation/devicetree/bindings/media/i2c/st,st-mipid02.yaml
>>   F:	drivers/media/i2c/st-mipid02.c
>>   
>> +ST STM32 FIREWALL
>> +M:	Gatien Chevallier <gatien.chevallier at foss.st.com>
>> +S:	Maintained
>> +F:	drivers/bus/stm32_firewall.c
>> +
>>   ST STM32 I2C/SMBUS DRIVER
>>   M:	Pierre-Yves MORDRET <pierre-yves.mordret at foss.st.com>
>>   M:	Alain Volmat <alain.volmat at foss.st.com>
>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>> index 6069120199bb..5a46e90f1e4e 100644
>> --- a/arch/arm64/Kconfig.platforms
>> +++ b/arch/arm64/Kconfig.platforms
>> @@ -293,6 +293,7 @@ config ARCH_STM32
>>   	select ARM_SMC_MBOX
>>   	select ARM_SCMI_PROTOCOL
>>   	select COMMON_CLK_SCMI
>> +	select STM32_FIREWALL
>>   	help
>>   	  This enables support for ARMv8 based STMicroelectronics
>>   	  STM32 family, including:
>> diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
>> index fcfa280df98a..4d54a7ea52b2 100644
>> --- a/drivers/bus/Kconfig
>> +++ b/drivers/bus/Kconfig
>> @@ -163,6 +163,16 @@ config QCOM_SSC_BLOCK_BUS
>>   	  i2c/spi/uart controllers, a hexagon core, and a clock controller
>>   	  which provides clocks for the above.
>>   
>> +config STM32_FIREWALL
>> +	bool "STM32 Firewall framework"
>> +	depends on ARCH_STM32
> 
> Why this dependency?
> 
>> +	default MACH_STM32MP157 || MACH_STM32MP13 || MACH_STM32MP25
>> +	help
>> +	  Say y to enable firewall framework and its services. Firewall
>> +	  controllers will be able to register to the framework. Firewall
>> +	  controllers must be initialized and register to the firewall framework
>> +	  at arch_initcall level.
> 
> This needs better wording saying it is only for stm32 devices.
> 

Ack, will change in V2.

>> +
>>   config SUN50I_DE2_BUS
>>   	bool "Allwinner A64 DE2 Bus Driver"
>>   	  default ARM64
>> diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
>> index d90eed189a65..fc0511450ec2 100644
>> --- a/drivers/bus/Makefile
>> +++ b/drivers/bus/Makefile
>> @@ -26,6 +26,7 @@ obj-$(CONFIG_OMAP_INTERCONNECT)	+= omap_l3_smx.o omap_l3_noc.o
>>   obj-$(CONFIG_OMAP_OCP2SCP)	+= omap-ocp2scp.o
>>   obj-$(CONFIG_QCOM_EBI2)		+= qcom-ebi2.o
>>   obj-$(CONFIG_QCOM_SSC_BLOCK_BUS)	+= qcom-ssc-block-bus.o
>> +obj-$(CONFIG_STM32_FIREWALL)	+= stm32_firewall.o
>>   obj-$(CONFIG_SUN50I_DE2_BUS)	+= sun50i-de2.o
>>   obj-$(CONFIG_SUNXI_RSB)		+= sunxi-rsb.o
>>   obj-$(CONFIG_OF)		+= simple-pm-bus.o
>> diff --git a/drivers/bus/stm32_firewall.c b/drivers/bus/stm32_firewall.c
>> new file mode 100644
>> index 000000000000..510db5bc6eaf
>> --- /dev/null
>> +++ b/drivers/bus/stm32_firewall.c
>> @@ -0,0 +1,252 @@
>> +// SPDX-License-Identifier: GPL-2.0-or-later
> 
> Are you _SURE_ this needs to be "or later"?  Sorry, I have to ask.
> 
> thanks,
> 
> greg k-h

I'll change to (GPL-2.0-only OR BSD-3-Clause) :)

Best regards,
Gatien