[PATCH v3 3/3] dt-bindings: soc: amlogic: document System Control registers

[Neil Armstrong]

Document the System Control registers regions found on all Amlogic
SoC families and it's clock, power, pinctrl and phy subnodes.

The regions has various independent registers tied to other
hardware devices, thus the syscon compatible.

Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 .../soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml  | 160 +++++++++++++++++++++
 1 file changed, 160 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
new file mode 100644
index 000000000000..16977e4e4357
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml
@@ -0,0 +1,160 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/amlogic/amlogic,meson-gx-hhi-sysctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson System Control registers
+
+maintainers:
+  - Neil Armstrong <neil.armstrong at linaro.org>
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - amlogic,meson-gx-hhi-sysctrl
+          - amlogic,meson-gx-ao-sysctrl
+          - amlogic,meson-axg-hhi-sysctrl
+          - amlogic,meson-axg-ao-sysctrl
+      - const: simple-mfd
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+  clock-controller:
+    type: object
+
+  power-controller:
+    $ref: /schemas/power/amlogic,meson-ee-pwrc.yaml
+
+  pinctrl:
+    type: object
+
+  phy:
+    type: object
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-clkc.yaml#
+
+      required:
+        - power-controller
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-ao-sysctrl
+            - amlogic,meson-axg-ao-sysctrl
+    then:
+      properties:
+        clock-controller:
+          $ref: /schemas/clock/amlogic,gxbb-aoclkc.yaml#
+
+        power-controller: false
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gx-hhi-sysctrl
+    then:
+      properties:
+        phy: false
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-hhi-sysctrl
+    then:
+      properties:
+        phy:
+          oneOf:
+            - $ref: /schemas/phy/amlogic,g12a-mipi-dphy-analog.yaml
+            - $ref: /schemas/phy/amlogic,meson-axg-mipi-pcie-analog.yaml
+
+required:
+  - compatible
+  - reg
+  - clock-controller
+
+additionalProperties: false
+
+examples:
+  - |
+    bus at c883c000 {
+        compatible = "simple-bus";
+        reg = <0xc883c000 0x2000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc883c000 0x2000>;
+
+        sysctrl: system-controller at 0 {
+            compatible = "amlogic,meson-gx-hhi-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x400>;
+
+            clock-controller {
+                compatible = "amlogic,gxbb-clkc";
+                #clock-cells = <1>;
+                clocks = <&xtal>;
+                clock-names = "xtal";
+            };
+
+            power-controller {
+                compatible = "amlogic,meson-gxbb-pwrc";
+                #power-domain-cells = <1>;
+                amlogic,ao-sysctrl = <&sysctrl_AO>;
+
+                resets = <&reset_viu>,
+                         <&reset_venc>,
+                         <&reset_vcbus>,
+                         <&reset_bt656>,
+                         <&reset_dvin>,
+                         <&reset_rdma>,
+                         <&reset_venci>,
+                         <&reset_vencp>,
+                         <&reset_vdac>,
+                         <&reset_vdi6>,
+                         <&reset_vencl>,
+                         <&reset_vid_lock>;
+                reset-names = "viu", "venc", "vcbus", "bt656", "dvin",
+                              "rdma", "venci", "vencp", "vdac", "vdi6",
+                              "vencl", "vid_lock";
+                clocks = <&clk_vpu>, <&clk_vapb>;
+                clock-names = "vpu", "vapb";
+            };
+        };
+    };
+
+    bus at c8100000 {
+        compatible = "simple-bus";
+        reg = <0xc8100000 0x100000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xc8100000 0x100000>;
+
+        sysctrl_AO: system-controller at 0 {
+            compatible = "amlogic,meson-gx-ao-sysctrl", "simple-mfd", "syscon";
+            reg = <0 0x100>;
+
+            clock-controller {
+                compatible = "amlogic,meson-gxbb-aoclkc", "amlogic,meson-gx-aoclkc";
+                #clock-cells = <1>;
+                #reset-cells = <1>;
+                clocks = <&xtal>, <&clk81>;
+                clock-names = "xtal", "mpeg-clk";
+            };
+        };
+    };

-- 
2.34.1