[PATCH 1/3] arm64: dts: amlogic: meson-g12b-odroid-n2: fix usb hub hog name

[Neil Armstrong]

This fixes the following dtschema check error:
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2-plus.dtb: pinctrl at 40: bank at 40: Unevaluated properties are not allowed ('hog-0' was unexpected)

Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
 arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
index 24d0442dffb2..a0b6646f73e4 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dtsi
@@ -241,7 +241,7 @@ &gpio {
 	 * This signal should be handled by a USB specific power sequence
 	 * in order to reset the Hub when USB bus is powered down.
 	 */
-	hog-0 {
+	usb-hub-hog {
 		gpio-hog;
 		gpios = <GPIOH_4 GPIO_ACTIVE_HIGH>;
 		output-high;

-- 
2.34.1