[PATCH V2] arm64: properly define SOFT_DIRTY functionality
Mark Rutland
mark.rutland at arm.com
Tue Jul 4 09:27:04 PDT 2023
On Tue, Jul 04, 2023 at 12:15:18PM -0400, Nico Pache wrote:
> Thanks Mark, that explanation is very helpful and makes sense.
>
> Sorry I dont normally work this close to hardware, let alone ARM
> hardware, so my understanding of all this is still growing. I mistook
> Anshuman's point as me missing a corner case, not that it was
> downright wrong.
No problem; thanks for confirming.
> One last thing, could the AF bit be used instead of the PTE_DIRTY to
> determine if a page is DIRTY & !WRITE?
> ie) pte_dirty(pte) = pte_hw_dirty(pte) || (pte_young(pte) && !pte_write(pte)
The AF tracks both reads and write accesses, and we need to be able to clear
that via pte_mkyoung() regardless of whether the page is dirty.
> or would this create cases of pages being considered dirty when they
> have only been read?
Yes -- that would happen, and would be a problem as it would significantly
amplify the set of pages we thought of as dirty (and I suspect might surprise
some code handling pages that are never mapped as writeable, since the dirty
state owuld be unexpected).
Thanks,
Mark.
>
> Cheers,
> -- Nico
>
> On Tue, Jul 4, 2023 at 11:18 AM Mark Rutland <mark.rutland at arm.com> wrote:
> >
> > On Tue, Jul 04, 2023 at 10:49:06AM -0400, Nico Pache wrote:
> > > Hi Mark,
> > >
> > > On Tue, Jul 4, 2023 at 10:19 AM Mark Rutland <mark.rutland at arm.com> wrote:
> > > >
> > > > On Tue, Jul 04, 2023 at 09:36:33AM -0400, Nico Pache wrote:
> > > > > ARM64 has a soft-dirty bit (software dirty) but never properly defines
> > > > > CONFIG_ARCH_HAS_SOFT_DIRTY or its necessary functions. This patch
> > > > > introduces the ability to set/clear the soft dirty bit in a similar
> > > > > manner as the other arches that utilize it.
> > > >
> > > > Anshuman already explained that this is not correct -- to enable
> > > > CONFIG_ARCH_HAS_SOFT_DIRTY, you need *another* PTE bit. Please don't send
> > > > another version following this approach.
> > > >
> > > > Despite its name, pte_sw_dirty() has nothing to do with
> > > > CONFIG_ARCH_HAS_SOFT_DIRTY. We have pte_hw_dirty() and pte_sw_dirty() because
> > > > with Hardware Dirty bit management the HW dirty bit is *also* the write
> > > > permission bit, and to have a dirty non-writeable PTE state we have to use a SW
> > > > bit, which is what pte_sw_dirty() handles. Both pte_hw_dirty() and
> > > > pte_sw_dirty() comprise the regular dirty state.
> > > >
> > > > That's *very* different from CONFIG_ARCH_HAS_SOFT_DIRTY, which is about having
> > > > a *separate* software dirty state that can be used for longer-term dirty
> > > > tracking (whether the page was last touched since some management SW
> > > > manipulated the page).
> > > >
> > > > > However, we must be careful... there are cases where the DBM bit is not
> > > > > available and the software dirty bit plays a essential role in determining
> > > > > whether or not a page is dirty. In these cases we must not allow the
> > > > > user to clear the software dirty bit. We can check for these cases by
> > > > > utilizing the arch_has_hw_pte_young() function which tests the availability
> > > > > of DBM.
> > > >
> > > > Regardless of the above, this doesn't seem to have been thought through. why
> > > > would it be ok for this to work or not work dependent on DBM?
> > > It was from my understanding of both reading the code, and the
> > > following chart that the PTE_DIRTY bit was only used in the absence of
> > > the DBM bit to determine the dirty state of a page.
> >
> > The PTE_DIRTY bit is used regardless of DBM, for example, in the case I
> > mentioned of a dirty non-writeable page. Without PTE_DIRTY we'd have no way to
> > represent a write-protected dirty page.
> >
> > See pte_wrprotect(), which copies moves HW dirty bit into the PTE_DIRTY bit
> > when removing write permission:
> >
> > | static inline pte_t pte_wrprotect(pte_t pte)
> > | {
> > | /*
> > | * If hardware-dirty (PTE_WRITE/DBM bit set and PTE_RDONLY
> > | * clear), set the PTE_DIRTY bit.
> > | */
> > | if (pte_hw_dirty(pte))
> > | pte = pte_mkdirty(pte);
> > |
> > | pte = clear_pte_bit(pte, __pgprot(PTE_WRITE));
> > | pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
> > | return pte;
> > | }
> >
> > ... where pte_mkdirty() is:
> >
> > | static inline pte_t pte_mkdirty(pte_t pte)
> > | {
> > | pte = set_pte_bit(pte, __pgprot(PTE_DIRTY));
> > |
> > | if (pte_write(pte))
> > | pte = clear_pte_bit(pte, __pgprot(PTE_RDONLY));
> > |
> > | return pte;
> > | }
> >
> > > /*
> > > * PTE bits configuration in the presence of hardware Dirty Bit Management
> > > * (PTE_WRITE == PTE_DBM):
> > > *
> > > * Dirty Writable | PTE_RDONLY PTE_WRITE PTE_DIRTY (sw)
> > > * 0 0 | 1 0 0
> > > * 0 1 | 1 1 0
> > > * 1 0 | 1 0 1
> > > * 1 1 | 0 1 x
> > > *
> > > * When hardware DBM is not present, the sofware PTE_DIRTY bit is updated via
> > > * the page fault mechanism. Checking the dirty status of a pte becomes:
> > > *
> > > * PTE_DIRTY || (PTE_WRITE && !PTE_RDONLY)
> > > */
> > >
> > > So from my understanding it seems that when DBM is present, it acts as
> > > the PTE_WRITE bit, and the AF bit is the HW dirty bit. This gives me
> > > the impression that the PTE_DIRTY bit is redundant; however, When DBM
> > > is not present PTE_DIRTY becomes crucial in determining the dirty
> > > state.
> >
> > As above, PTE_DIRTY is not redundant; regardless of DBM we need the PTE_DIRTY
> > bit for the regular dirty state. It distinguishes the first and third rows in
> > that table.
> >
> > Thanks,
> > Mark.
> >
> > >
> > > -- Nico
> > > >
> > > > Thanks,
> > > > Mark.
> > > >
> > > > > Cc: Andrew Morton <akpm at linux-foundation.org>
> > > > > Cc: Anshuman Khandual <anshuman.khandual at arm.com>
> > > > > Cc: Catalin Marinas <catalin.marinas at arm.com>
> > > > > Cc: David Hildenbrand <david at redhat.com>
> > > > > Cc: Gerald Schaefer <gerald.schaefer at linux.ibm.com>
> > > > > Cc: Liu Shixin <liushixin2 at huawei.com>
> > > > > Cc: Will Deacon <will at kernel.org>
> > > > > Cc: Yu Zhao <yuzhao at google.com>
> > > > > Signed-off-by: Nico Pache <npache at redhat.com>
> > > > > ---
> > > > > arch/arm64/Kconfig | 1 +
> > > > > arch/arm64/include/asm/pgtable.h | 104 ++++++++++++++++++++++++++-----
> > > > > 2 files changed, 90 insertions(+), 15 deletions(-)
> > > > >
> > > > > diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
> > > > > index 7856c3a3e35a..6ea73b8148c5 100644
> > > > > --- a/arch/arm64/Kconfig
> > > > > +++ b/arch/arm64/Kconfig
> > > > > @@ -173,6 +173,7 @@ config ARM64
> > > > > select HAVE_ARCH_PREL32_RELOCATIONS
> > > > > select HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
> > > > > select HAVE_ARCH_SECCOMP_FILTER
> > > > > + select HAVE_ARCH_SOFT_DIRTY
> > > > > select HAVE_ARCH_STACKLEAK
> > > > > select HAVE_ARCH_THREAD_STRUCT_WHITELIST
> > > > > select HAVE_ARCH_TRACEHOOK
> > > > > diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
> > > > > index 0bd18de9fd97..c4970c9ed114 100644
> > > > > --- a/arch/arm64/include/asm/pgtable.h
> > > > > +++ b/arch/arm64/include/asm/pgtable.h
> > > > > @@ -51,6 +51,20 @@ static inline bool arch_thp_swp_supported(void)
> > > > > }
> > > > > #define arch_thp_swp_supported arch_thp_swp_supported
> > > > >
> > > > > +/*
> > > > > + * On arm64 without hardware Access Flag, copying from user will fail because
> > > > > + * the pte is old and cannot be marked young. So we always end up with zeroed
> > > > > + * page after fork() + CoW for pfn mappings. We don't always have a
> > > > > + * hardware-managed access flag on arm64.
> > > > > + */
> > > > > +#define arch_has_hw_pte_young cpu_has_hw_af
> > > > > +
> > > > > +/*
> > > > > + * Experimentally, it's cheap to set the access flag in hardware and we
> > > > > + * benefit from prefaulting mappings as 'old' to start with.
> > > > > + */
> > > > > +#define arch_wants_old_prefaulted_pte cpu_has_hw_af
> > > > > +
> > > > > /*
> > > > > * Outside of a few very special situations (e.g. hibernation), we always
> > > > > * use broadcast TLB invalidation instructions, therefore a spurious page
> > > > > @@ -121,8 +135,9 @@ static inline pteval_t __phys_to_pte_val(phys_addr_t phys)
> > > > > })
> > > > >
> > > > > #define pte_hw_dirty(pte) (pte_write(pte) && !(pte_val(pte) & PTE_RDONLY))
> > > > > -#define pte_sw_dirty(pte) (!!(pte_val(pte) & PTE_DIRTY))
> > > > > -#define pte_dirty(pte) (pte_sw_dirty(pte) || pte_hw_dirty(pte))
> > > > > +#define pte_soft_dirty(pte) (!!(pte_val(pte) & PTE_DIRTY))
> > > > > +#define pte_dirty(pte) (pte_soft_dirty(pte) || pte_hw_dirty(pte))
> > > > > +#define pte_swp_soft_dirty(pte) pte_soft_dirty(pte)
> > > > >
> > > > > #define pte_valid(pte) (!!(pte_val(pte) & PTE_VALID))
> > > > > /*
> > > > > @@ -189,7 +204,8 @@ static inline pte_t pte_mkwrite(pte_t pte)
> > > > >
> > > > > static inline pte_t pte_mkclean(pte_t pte)
> > > > > {
> > > > > - pte = clear_pte_bit(pte, __pgprot(PTE_DIRTY));
> > > > > + if (!arch_has_hw_pte_young())
> > > > > + pte = clear_pte_bit(pte, __pgprot(PTE_DIRTY));
> > > > > pte = set_pte_bit(pte, __pgprot(PTE_RDONLY));
> > > > >
> > > > > return pte;
> > > > > @@ -1077,25 +1093,83 @@ static inline void update_mmu_cache(struct vm_area_struct *vma,
> > > > > #define phys_to_ttbr(addr) (addr)
> > > > > #endif
> > > > >
> > > > > -/*
> > > > > - * On arm64 without hardware Access Flag, copying from user will fail because
> > > > > - * the pte is old and cannot be marked young. So we always end up with zeroed
> > > > > - * page after fork() + CoW for pfn mappings. We don't always have a
> > > > > - * hardware-managed access flag on arm64.
> > > > > - */
> > > > > -#define arch_has_hw_pte_young cpu_has_hw_af
> > > > > +static inline bool pud_sect_supported(void)
> > > > > +{
> > > > > + return PAGE_SIZE == SZ_4K;
> > > > > +}
> > > > >
> > > > > +#ifdef CONFIG_ARM64_HW_AFDBM
> > > > > /*
> > > > > - * Experimentally, it's cheap to set the access flag in hardware and we
> > > > > - * benefit from prefaulting mappings as 'old' to start with.
> > > > > + * if we have the DBM bit we can utilize the software dirty bit as
> > > > > + * a mechanism to introduce the soft_dirty functionality; however, without
> > > > > + * it this bit is crucial to determining if a entry is dirty and we cannot
> > > > > + * clear it via software. DBM can also be disabled or broken on some early
> > > > > + * armv8 devices, so check its availability before modifying it.
> > > > > */
> > > > > -#define arch_wants_old_prefaulted_pte cpu_has_hw_af
> > > > > +static inline pte_t pte_clear_soft_dirty(pte_t pte)
> > > > > +{
> > > > > + if (!arch_has_hw_pte_young())
> > > > > + return pte;
> > > > >
> > > > > -static inline bool pud_sect_supported(void)
> > > > > + return clear_pte_bit(pte, __pgprot(PTE_DIRTY));
> > > > > +}
> > > > > +
> > > > > +static inline pte_t pte_mksoft_dirty(pte_t pte)
> > > > > {
> > > > > - return PAGE_SIZE == SZ_4K;
> > > > > + if (!arch_has_hw_pte_young())
> > > > > + return pte;
> > > > > +
> > > > > + return set_pte_bit(pte, __pgprot(PTE_DIRTY));
> > > > > +}
> > > > > +
> > > > > +static inline pte_t pte_swp_clear_soft_dirty(pte_t pte)
> > > > > +{
> > > > > + if (!arch_has_hw_pte_young())
> > > > > + return pte;
> > > > > +
> > > > > + return clear_pte_bit(pte, __pgprot(PTE_DIRTY));
> > > > > +}
> > > > > +
> > > > > +static inline pte_t pte_swp_mksoft_dirty(pte_t pte)
> > > > > +{
> > > > > + if (!arch_has_hw_pte_young())
> > > > > + return pte;
> > > > > +
> > > > > + return set_pte_bit(pte, __pgprot(PTE_DIRTY));
> > > > > +}
> > > > > +
> > > > > +static inline int pmd_soft_dirty(pmd_t pmd)
> > > > > +{
> > > > > + return pte_soft_dirty(pmd_pte(pmd));
> > > > > +}
> > > > > +
> > > > > +static inline pmd_t pmd_clear_soft_dirty(pmd_t pmd)
> > > > > +{
> > > > > + return pte_pmd(pte_clear_soft_dirty(pmd_pte(pmd)));
> > > > > +}
> > > > > +
> > > > > +static inline pmd_t pmd_mksoft_dirty(pmd_t pmd)
> > > > > +{
> > > > > + return pte_pmd(pte_mksoft_dirty(pmd_pte(pmd)));
> > > > > }
> > > > >
> > > > > +#ifdef CONFIG_ARCH_ENABLE_THP_MIGRATION
> > > > > +static inline int pmd_swp_soft_dirty(pmd_t pmd)
> > > > > +{
> > > > > + return pmd_soft_dirty(pmd);
> > > > > +}
> > > > > +
> > > > > +static inline pmd_t pmd_swp_clear_soft_dirty(pmd_t pmd)
> > > > > +{
> > > > > + return pmd_clear_soft_dirty(pmd);
> > > > > +}
> > > > > +
> > > > > +static inline pmd_t pmd_swp_mksoft_dirty(pmd_t pmd)
> > > > > +{
> > > > > + return pmd_mksoft_dirty(pmd);
> > > > > +}
> > > > > +#endif /* CONFIG_ARCH_ENABLE_THP_MIGRATION */
> > > > > +#endif /* CONFIG_ARM64_HW_AFDBM */
> > > > >
> > > > > #define __HAVE_ARCH_PTEP_MODIFY_PROT_TRANSACTION
> > > > > #define ptep_modify_prot_start ptep_modify_prot_start
> > > > > --
> > > > > 2.41.0
> > > > >
> > > >
> > >
> >
>
More information about the linux-arm-kernel
mailing list