[PATCH] ARM: dts: BCM5301X: Add Wi-Fi regulatory mappings for Luxul devices

Dan Haab riproute at gmail.com
Wed Jul 5 08:32:51 PDT 2023


From: Dan Haab <dan.haab at luxul.com>

This allows setting FullMAC firmware regulatory domain.

Signed-off-by: Dan Haab <dan.haab at luxul.com>
---
 .../dts/broadcom/bcm47094-luxul-xap-1610.dts  | 37 +++++++++++++++++++
 .../broadcom/bcm47094-luxul-xwr-3150-v1.dts   | 36 ++++++++++++++++++
 2 files changed, 73 insertions(+)

diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
index 6875625869d9..afc635c8cdeb 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xap-1610.dts
@@ -64,6 +64,43 @@ &gmac0 {
 	nvmem-cell-names = "mac-address";
 };
 
+
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge at 0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi at 0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge at 0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi at 0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-920", "CA-CA-892", "GB-DE-964", "NZ-AU-920", "US-US-825";
+		};
+	};
+};
+
 &spi_nor {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
index 789dd2a3d226..e28f7a350117 100644
--- a/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
+++ b/arch/arm/boot/dts/broadcom/bcm47094-luxul-xwr-3150-v1.dts
@@ -81,6 +81,42 @@ &gmac0 {
 	nvmem-cell-names = "mac-address";
 };
 
+&pcie0 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge at 0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi at 0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
+&pcie1 {
+	#address-cells = <3>;
+	#size-cells = <2>;
+
+	bridge at 0,0 {
+		reg = <0x0000 0 0 0 0>;
+
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi at 0,0 {
+			compatible = "brcm,bcm4366-fmac", "brcm,bcm4329-fmac";
+			reg = <0x0000 0 0 0 0>;
+			brcm,ccode-map = "AU-AU-953", "CA-CA-946", "GB-E0-846", "NZ-AU-953", "US-Q2-930";
+		};
+	};
+};
+
 &usb3 {
 	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 };
-- 
2.34.1




More information about the linux-arm-kernel mailing list