[PATCH 2/2] arm64: dts: freescale: add missing space before {
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Wed Jul 5 07:59:53 PDT 2023
Add missing whitespace between node name/label and opening {.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>
---
arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi | 6 +++---
arch/arm64/boot/dts/freescale/imx8mn-evk.dts | 6 +++---
arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts | 4 ++--
arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8mq.dtsi | 2 +-
arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts | 2 +-
6 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index bd5d771637ca..9b1b522517f8 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -684,15 +684,15 @@ &lsio_pwm3 {
};
/* Messaging Units */
-&mu_m0{
+&mu_m0 {
status = "okay";
};
-&mu1_m0{
+&mu1_m0 {
status = "okay";
};
-&mu2_m0{
+&mu2_m0 {
status = "okay";
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 4839a962a170..0b71f50d936e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -40,7 +40,7 @@ pmic: pmic at 25 {
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
regulators {
- buck1: BUCK1{
+ buck1: BUCK1 {
regulator-name = "VDD_SOC";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
@@ -59,7 +59,7 @@ buck2: BUCK2 {
regulator-ramp-delay = <3125>;
};
- buck4: BUCK4{
+ buck4: BUCK4 {
regulator-name = "VDD_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -67,7 +67,7 @@ buck4: BUCK4{
regulator-always-on;
};
- buck5: BUCK5{
+ buck5: BUCK5 {
regulator-name = "VDD_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
index b4409349eb3f..cccdc3dd1c6c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-debix-model-a.dts
@@ -129,7 +129,7 @@ buck2: BUCK2 {
nxp,dvs-standby-voltage = <850000>;
};
- buck4: BUCK4{
+ buck4: BUCK4 {
regulator-name = "BUCK4";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
@@ -137,7 +137,7 @@ buck4: BUCK4{
regulator-always-on;
};
- buck5: BUCK5{
+ buck5: BUCK5 {
regulator-name = "BUCK5";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <3400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
index 0187890a90c5..efc00f4abeb1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -133,7 +133,7 @@ eeprom at 50 {
};
};
-&pgc_gpu{
+&pgc_gpu {
power-supply = <&sw1a_reg>;
};
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 225eceeaf0d5..5b5414955420 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -631,7 +631,7 @@ snvs: snvs at 30370000 {
compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
reg = <0x30370000 0x10000>;
- snvs_rtc: snvs-rtc-lp{
+ snvs_rtc: snvs-rtc-lp {
compatible = "fsl,sec-v4.0-mon-rtc-lp";
regmap = <&snvs>;
offset = <0x34>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
index 7d00e17f0447..50bf7919c863 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ai_ml.dts
@@ -180,7 +180,7 @@ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020
>;
};
- pinctrl_leds: ledsgrp{
+ pinctrl_leds: ledsgrp {
fsl,pins = <
IMX8QXP_ESAI0_TX2_RX3_LSIO_GPIO0_IO06 0x00000021
IMX8QXP_ESAI0_TX3_RX2_LSIO_GPIO0_IO07 0x00000021
--
2.34.1
More information about the linux-arm-kernel
mailing list