[PATCH v2 1/3] dt-bindings: clock: amlogic: convert amlogic,gxbb-clkc.txt to dt-schema
Neil Armstrong
neil.armstrong at linaro.org
Wed Jul 5 04:41:51 PDT 2023
Convert the Amlogic Clock Controller bindings to dt-schema.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
.../bindings/clock/amlogic,gxbb-clkc.txt | 53 ----------------------
.../bindings/clock/amlogic,gxbb-clkc.yaml | 37 +++++++++++++++
2 files changed, 37 insertions(+), 53 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
deleted file mode 100644
index 7ccecd5c02c1..000000000000
--- a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.txt
+++ /dev/null
@@ -1,53 +0,0 @@
-* Amlogic GXBB Clock and Reset Unit
-
-The Amlogic GXBB clock controller generates and supplies clock to various
-controllers within the SoC.
-
-Required Properties:
-
-- compatible: should be:
- "amlogic,gxbb-clkc" for GXBB SoC,
- "amlogic,gxl-clkc" for GXL and GXM SoC,
- "amlogic,axg-clkc" for AXG SoC.
- "amlogic,g12a-clkc" for G12A SoC.
- "amlogic,g12b-clkc" for G12B SoC.
- "amlogic,sm1-clkc" for SM1 SoC.
-- clocks : list of clock phandle, one for each entry clock-names.
-- clock-names : should contain the following:
- * "xtal": the platform xtal
-
-- #clock-cells: should be 1.
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume. All available clocks are defined as
-preprocessor macros in the dt-bindings/clock/gxbb-clkc.h header and can be
-used in device tree sources.
-
-Parent node should have the following properties :
-- compatible: "syscon", "simple-mfd, and "amlogic,meson-gx-hhi-sysctrl" or
- "amlogic,meson-axg-hhi-sysctrl"
-- reg: base address and size of the HHI system control register space.
-
-Example: Clock controller node:
-
-sysctrl: system-controller at 0 {
- compatible = "amlogic,meson-gx-hhi-sysctrl", "syscon", "simple-mfd";
- reg = <0 0 0 0x400>;
-
- clkc: clock-controller {
- #clock-cells = <1>;
- compatible = "amlogic,gxbb-clkc";
- clocks = <&xtal>;
- clock-names = "xtal";
- };
-};
-
-Example: UART controller node that consumes the clock generated by the clock
- controller:
-
- uart_AO: serial at c81004c0 {
- compatible = "amlogic,meson-uart";
- reg = <0xc81004c0 0x14>;
- interrupts = <0 90 1>;
- clocks = <&clkc CLKID_CLK81>;
- };
diff --git a/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
new file mode 100644
index 000000000000..63246f1cb539
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/amlogic,gxbb-clkc.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/amlogic,gxbb-clkc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Clock Controller
+
+maintainers:
+ - Neil Armstrong <neil.armstrong at linaro.org>
+
+properties:
+ compatible:
+ enum:
+ - amlogic,gxbb-clkc
+ - amlogic,gxl-clkc
+ - amlogic,axg-clkc
+ - amlogic,g12a-clkc
+ - amlogic,g12b-clkc
+ - amlogic,sm1-clkc
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ const: xtal
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - clocks
+ - clock-names
+ - '#clock-cells'
+
+additionalProperties: false
--
2.34.1
More information about the linux-arm-kernel
mailing list