[PATCH 2/2] ARM: dts: imx6: pfla02: Fix SD card reboot problem

[Ahmad Fatoum]

Hi Andrej,

[Restoring Cc-list]

On 05.07.23 10:18, Andrej Picej wrote:
> Hi Ahmad,
> 
> On 4. 07. 23 10:15, Ahmad Fatoum wrote:
>> Hello Andrej,
>>
>> On 04.07.23 10:03, Andrej Picej wrote:
>>> If regulator is not marked as always-on the regulator gets disabled on
>>> reboot breaking the next boot.
>>
>> While this is ok as a fix, the real issue is that your system reset doesn't
>> restore PMIC rails to a good state. Are you perhaps doing a SoC-internal
>> reset only or have the PMIC misconfigured?
> 
> yes I would agree, this is just a fix since system reset doesn't reset the PMIC, leaving the configuration as it is in a misconfigured state. The i.MX6 reset is done with imx watchdog.

If PMIC doesn't have own watchdog, i.MX watchdog can be configured to toggle
WDOG_B line, which may be routed to PMIC.

But fix is ok for now:

Acked-by: Ahmad Fatoum <a.fatoum at pengutronix.de>

Cheers,
Ahmad

> 
> Best regards,
> Andrej
> 
>>
>> Cheers,
>> Ahmad
>>
>>>
>>> Signed-off-by: Andrej Picej <andrej.picej at norik.com>
>>> ---
>>>   arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>> diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
>>> index 80adb2a02cc9..25d6a036d5b8 100644
>>> --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
>>> +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
>>> @@ -192,6 +192,7 @@ vdd_3v3_pmic_io_reg: ldo6 {
>>>               vdd_sd0_reg: ldo9 {
>>>                   regulator-min-microvolt = <3300000>;
>>>                   regulator-max-microvolt = <3300000>;
>>> +                regulator-always-on;
>>>               };
>>>                 vdd_sd1_reg: ldo10 {
>>
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |