[RESEND PATCH v5 05/11] arm64: tlb: Refactor the core flush algorithm of __flush_tlb_range

Gavin Shan gshan at redhat.com
Tue Jul 4 17:10:45 PDT 2023


On 6/22/23 03:49, Raghavendra Rao Ananta wrote:
> Currently, the core TLB flush functionality of __flush_tlb_range()
> hardcodes vae1is (and variants) for the flush operation. In the
> upcoming patches, the KVM code reuses this core algorithm with
> ipas2e1is for range based TLB invalidations based on the IPA.
> Hence, extract the core flush functionality of __flush_tlb_range()
> into its own macro that accepts an 'op' argument to pass any
> TLBI operation, such that other callers (KVM) can benefit.
> 
> No functional changes intended.
> 
> Signed-off-by: Raghavendra Rao Ananta <rananta at google.com>
> Reviewed-by: Catalin Marinas <catalin.marinas at arm.com>
> ---
>   arch/arm64/include/asm/tlbflush.h | 108 +++++++++++++++---------------
>   1 file changed, 55 insertions(+), 53 deletions(-)
> 

With the following nits addressed:

Reviewed-by: Gavin Shan <gshan at redhat.com>

> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
> index 412a3b9a3c25d..4775378b6da1b 100644
> --- a/arch/arm64/include/asm/tlbflush.h
> +++ b/arch/arm64/include/asm/tlbflush.h
> @@ -278,14 +278,61 @@ static inline void flush_tlb_page(struct vm_area_struct *vma,
>    */
>   #define MAX_TLBI_OPS	PTRS_PER_PTE
>   
> +/* When the CPU does not support TLB range operations, flush the TLB
> + * entries one by one at the granularity of 'stride'. If the TLB
> + * range ops are supported, then:
> + *
> + * 1. If 'pages' is odd, flush the first page through non-range
> + *    operations;
> + *
> + * 2. For remaining pages: the minimum range granularity is decided
> + *    by 'scale', so multiple range TLBI operations may be required.
> + *    Start from scale = 0, flush the corresponding number of pages
> + *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
> + *    until no pages left.
> + *
> + * Note that certain ranges can be represented by either num = 31 and
> + * scale or num = 0 and scale + 1. The loop below favours the latter
> + * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
> + */
> +#define __flush_tlb_range_op(op, start, pages, stride,			\
> +				asid, tlb_level, tlbi_user) do {	\
> +	int num = 0;							\
> +	int scale = 0;							\
> +	unsigned long addr;						\
> +									\
> +	while (pages > 0) {						\
> +		if (!system_supports_tlb_range() ||			\
> +		    pages % 2 == 1) {					\
> +			addr = __TLBI_VADDR(start, asid);		\
> +			__tlbi_level(op, addr, tlb_level);		\
> +			if (tlbi_user)					\
> +				__tlbi_user_level(op, addr, tlb_level);	\
> +			start += stride;				\
> +			pages -= stride >> PAGE_SHIFT;			\
> +			continue;					\
> +		}							\
> +									\
> +		num = __TLBI_RANGE_NUM(pages, scale);			\
> +		if (num >= 0) {						\
> +			addr = __TLBI_VADDR_RANGE(start, asid, scale,	\
> +						  num, tlb_level);	\
> +			__tlbi(r##op, addr);				\
> +			if (tlbi_user)					\
> +				__tlbi_user(r##op, addr);		\
> +			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT; \
> +			pages -= __TLBI_RANGE_PAGES(num, scale);	\
> +		}							\
> +		scale++;						\
> +	}								\
> +} while (0)
> +

There is a warning reported from 'checkpatch.pl'.

     WARNING: suspect code indent for conditional statements (32, 8)
     #52: FILE: arch/arm64/include/asm/tlbflush.h:299:
     +				asid, tlb_level, tlbi_user) do {	\
     [...]
     +	unsigned long addr;						\

     total: 0 errors, 1 warnings, 125 lines checked

You probably need to tweak it as below, to avoid the warning.

     #define __flush_tlb_range_op(op, start, pages, stride,                \
                                  asid, tlb_level, tlbi_user)              \
     do {                                                                  \


>   static inline void __flush_tlb_range(struct vm_area_struct *vma,
>   				     unsigned long start, unsigned long end,
>   				     unsigned long stride, bool last_level,
>   				     int tlb_level)
>   {
> -	int num = 0;
> -	int scale = 0;
> -	unsigned long asid, addr, pages;
> +	unsigned long asid, pages;
>   
>   	start = round_down(start, stride);
>   	end = round_up(end, stride);
> @@ -307,56 +354,11 @@ static inline void __flush_tlb_range(struct vm_area_struct *vma,
>   	dsb(ishst);
>   	asid = ASID(vma->vm_mm);
>   
> -	/*
> -	 * When the CPU does not support TLB range operations, flush the TLB
> -	 * entries one by one at the granularity of 'stride'. If the TLB
> -	 * range ops are supported, then:
> -	 *
> -	 * 1. If 'pages' is odd, flush the first page through non-range
> -	 *    operations;
> -	 *
> -	 * 2. For remaining pages: the minimum range granularity is decided
> -	 *    by 'scale', so multiple range TLBI operations may be required.
> -	 *    Start from scale = 0, flush the corresponding number of pages
> -	 *    ((num+1)*2^(5*scale+1) starting from 'addr'), then increase it
> -	 *    until no pages left.
> -	 *
> -	 * Note that certain ranges can be represented by either num = 31 and
> -	 * scale or num = 0 and scale + 1. The loop below favours the latter
> -	 * since num is limited to 30 by the __TLBI_RANGE_NUM() macro.
> -	 */
> -	while (pages > 0) {
> -		if (!system_supports_tlb_range() ||
> -		    pages % 2 == 1) {
> -			addr = __TLBI_VADDR(start, asid);
> -			if (last_level) {
> -				__tlbi_level(vale1is, addr, tlb_level);
> -				__tlbi_user_level(vale1is, addr, tlb_level);
> -			} else {
> -				__tlbi_level(vae1is, addr, tlb_level);
> -				__tlbi_user_level(vae1is, addr, tlb_level);
> -			}
> -			start += stride;
> -			pages -= stride >> PAGE_SHIFT;
> -			continue;
> -		}
> -
> -		num = __TLBI_RANGE_NUM(pages, scale);
> -		if (num >= 0) {
> -			addr = __TLBI_VADDR_RANGE(start, asid, scale,
> -						  num, tlb_level);
> -			if (last_level) {
> -				__tlbi(rvale1is, addr);
> -				__tlbi_user(rvale1is, addr);
> -			} else {
> -				__tlbi(rvae1is, addr);
> -				__tlbi_user(rvae1is, addr);
> -			}
> -			start += __TLBI_RANGE_PAGES(num, scale) << PAGE_SHIFT;
> -			pages -= __TLBI_RANGE_PAGES(num, scale);
> -		}
> -		scale++;
> -	}
> +	if (last_level)
> +		__flush_tlb_range_op(vale1is, start, pages, stride, asid, tlb_level, true);
> +	else
> +		__flush_tlb_range_op(vae1is, start, pages, stride, asid, tlb_level, true);
> +
>   	dsb(ish);
>   }
>   

Thanks,
Gavin




More information about the linux-arm-kernel mailing list