[PATCH] arm64: dts: imx8mn-var-som: add missing pull-up for onboard PHY reset pinmux

[Hugo Villeneuve]

From: Hugo Villeneuve <hvilleneuve at dimonoff.com>

For SOMs with an onboard PHY, the RESET_N pull-up resistor is
currently deactivated in the pinmux configuration. When the pinmux
code selects the GPIO function for this pin, with a default direction
of input, this prevents the RESET_N pin from being taken to the proper
3.3V level (deasserted), and this results in the PHY being not
detected since it is held in reset.

Taken from RESET_N pin description in ADIN13000 datasheet:
    This pin requires a 1K pull-up resistor to AVDD_3P3.

Activate the pull-up resistor to fix the issue.

Fixes: ade0176dd8a0 ("arm64: dts: imx8mn-var-som: Add Variscite VAR-SOM-MX8MN System on Module")
Signed-off-by: Hugo Villeneuve <hvilleneuve at dimonoff.com>
---
 arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index d3a67109d55b..b8946edf317b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -358,7 +358,7 @@ MX8MN_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x1f
 			MX8MN_IOMUXC_ENET_RXC_ENET1_RGMII_RXC		0x91
 			MX8MN_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x91
 			MX8MN_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x1f
-			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x19
+			MX8MN_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x159
 		>;
 	};
 
-- 
2.30.2