[PATCH v8 1/5] staging: vc04_services: vchiq_arm: Add new bus type and device type

[Greg KH]

On Mon, Jul 03, 2023 at 06:15:25PM +0200, Umang Jain wrote:
> Hi Greg,
> 
> (resending because it got bounced off a few lists due a line a copied with
> HTML tag..)
> 
> On 7/3/23 3:28 PM, Greg KH wrote:
> > On Tue, Jun 27, 2023 at 10:16:24PM +0200, Umang Jain wrote:
> > > The devices that the vchiq interface registers (bcm2835-audio,
> > > bcm2835-camera) are implemented and exposed by the VC04 firmware.
> > > The device tree describes the VC04 itself with the resources required
> > > to communicate with it through a mailbox interface. However, the
> > > vchiq interface registers these devices as platform devices. This
> > > also means the specific drivers for these devices are getting
> > > registered as platform drivers. This is not correct and a blatant
> > > abuse of platform device/driver.
> > > 
> > > Add a new bus type, vchiq_bus_type and device type (struct vchiq_device)
> > > which will be used to migrate child devices that the vchiq interfaces
> > > creates/registers from the platform device/driver.
> > > 
> > > Signed-off-by: Umang Jain <umang.jain at ideasonboard.com>
> > > ---
> > >   drivers/staging/vc04_services/Makefile        |  1 +
> > >   .../interface/vchiq_arm/vchiq_device.c        | 78 +++++++++++++++++++
> > >   .../interface/vchiq_arm/vchiq_device.h        | 43 ++++++++++
> > >   3 files changed, 122 insertions(+)
> > >   create mode 100644 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
> > >   create mode 100644 drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.h
> > > 
> > > diff --git a/drivers/staging/vc04_services/Makefile b/drivers/staging/vc04_services/Makefile
> > > index 44794bdf6173..2d071e55e175 100644
> > > --- a/drivers/staging/vc04_services/Makefile
> > > +++ b/drivers/staging/vc04_services/Makefile
> > > @@ -5,6 +5,7 @@ vchiq-objs := \
> > >      interface/vchiq_arm/vchiq_core.o  \
> > >      interface/vchiq_arm/vchiq_arm.o \
> > >      interface/vchiq_arm/vchiq_debugfs.o \
> > > +   interface/vchiq_arm/vchiq_device.o \
> > >      interface/vchiq_arm/vchiq_connected.o \
> > >   ifdef CONFIG_VCHIQ_CDEV
> > > diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
> > > new file mode 100644
> > > index 000000000000..dff312e9735c
> > > --- /dev/null
> > > +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_device.c
> > > @@ -0,0 +1,78 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * vchiq_device.c - VCHIQ generic device and bus-type
> > > + *
> > > + * Copyright (c) 2023 Ideas On Board Oy
> > > + */
> > > +
> > > +#include <linux/device/bus.h>
> > > +#include <linux/slab.h>
> > > +#include <linux/string.h>
> > > +
> > > +#include "vchiq_device.h"
> > > +
> > > +static int vchiq_bus_type_match(struct device *dev, struct device_driver *drv);
> > > +
> > > +struct bus_type vchiq_bus_type = {
> > > +	.name   = "vchiq-bus",
> > > +	.match  = vchiq_bus_type_match,
> > > +};
> > > +
> > > +static int vchiq_bus_type_match(struct device *dev, struct device_driver *drv)
> > > +{
> > > +	if (dev->bus == &vchiq_bus_type &&
> > > +	    strcmp(dev_name(dev), drv->name) == 0)
> > > +		return 1;
> > > +	return 0;
> > > +}
> > > +
> > > +static void vchiq_device_release(struct device *dev)
> > > +{
> > > +	struct vchiq_device *device;
> > > +
> > > +	device = container_of(dev, struct vchiq_device, dev);
> > > +	kfree(device);
> > > +}
> > > +
> > > +int vchiq_device_register(struct device *parent, const char *name)
> > > +{
> > > +	struct vchiq_device *device = NULL;
> > No need to set this to NULL.
> > 
> > > +	int ret;
> > > +
> > > +	device = kzalloc(sizeof(*device), GFP_KERNEL);
> > > +	if (!device)
> > > +		return -ENOMEM;
> > > +
> > > +	device->dev.init_name = name;
> > > +	device->dev.parent = parent;
> > > +	device->dev.bus = &vchiq_bus_type;
> > > +	device->dev.release = vchiq_device_release;
> > > +
> > > +	ret = device_register(&device->dev);
> > > +	if (ret) {
> > > +		put_device(&device->dev);
> > > +		return -EINVAL;
> > Why not return the error given to you?
> > 
> > > +	}
> > > +
> > > +	return 0;
> > You create a new device, shouldn't you return it?  How is it going to be
> > looked up again?
> 
> So I haven't come across usage of the device other than unregistered right
> now. If you look at the platform_device static instances of bcm2835_camera,
> bcm2835-audio, they are also just used for unregistering the devices only.

That feels odd, you need to register a device, use it, and then
unregister it when finished.  Otherwise why have it?

> So for unregistering devices on vchiq_bus - I am using the
> 
>     bus_for_each_dev(&vchiq_bus_type, NULL, NULL, vchiq_device_unregister);

Ick, no, that is horrid, unregister the device that was created, that's
how all other busses work.

> So basically I can return the instances right now, but there would be no
> user of those instances.

You should save it :)


> > 
> > > +}
> > > +
> > > +int vchiq_device_unregister(struct device *dev, void *data)
> > You should be passing in a sruct vchiq_device *device here, right?
> > 
> > And why the void pointer you do nothing with?
> 
> ack
> > 
> > 
> > > +{
> > > +	device_unregister(dev);
> > > +	return 0;
> > > +}
> > No need to export this?
> 
> In the previous reviews you mentioned not to export it. The vchiq_bus_type
> is internal to the vchiq_driver to register it's child devices. I don't
> think any other module will be using this bus directly? Maybe I'm mistaken?

Ok, just didn't match up with the register function export.

thanks,

greg k-h