[PATCH v3 4/8] clk: sunxi-ng: nm: Support finding closest rate
Maxime Ripard
maxime at cerno.tech
Mon Jul 3 00:24:53 PDT 2023
Hi,
On Sun, Jul 02, 2023 at 07:55:23PM +0200, Frank Oltmanns wrote:
> Incorporate a new function, ccu_nm_find_best_closest, that selects the
> closest possible rate instead of the closest rate that is less than the
> requested rate. Utilizing rational_best_approximation has the additional
> effect of boosting performance in clock rate selection.
>
> In cases where the CCU_FEATURE_CLOSEST_RATE flag is set, use
> ccu_nm_find_best_closest instead of the original ccu_nm_find_best
> function.
>
> Extend the macro SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX to allow
> selecting additional features and update all usages of the macro with no
> additional flags set.
>
> Signed-off-by: Frank Oltmanns <frank at oltmanns.dev>
> ---
> drivers/clk/sunxi-ng/ccu-sun50i-a64.c | 6 ++++--
> drivers/clk/sunxi-ng/ccu-sun8i-h3.c | 3 ++-
> drivers/clk/sunxi-ng/ccu-sun8i-r40.c | 6 ++++--
> drivers/clk/sunxi-ng/ccu_nm.c | 23 +++++++++++++++++++++--
> drivers/clk/sunxi-ng/ccu_nm.h | 6 ++++--
> 5 files changed, 35 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> index a139a5c438d4..ebfab1fdbb96 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-a64.c
> @@ -80,7 +80,8 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video0_clk, "pll-video0",
> 297000000, /* frac rate 1 */
> BIT(31), /* gate */
> BIT(28), /* lock */
> - CLK_SET_RATE_UNGATE);
> + CLK_SET_RATE_UNGATE,
> + 0); /* features */
>
> static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
> "osc24M", 0x018,
> @@ -143,7 +144,8 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video1_clk, "pll-video1",
> 297000000, /* frac rate 1 */
> BIT(31), /* gate */
> BIT(28), /* lock */
> - CLK_SET_RATE_UNGATE);
> + CLK_SET_RATE_UNGATE,
> + 0); /* features */
>
> static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_gpu_clk, "pll-gpu",
> "osc24M", 0x038,
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> index bfebe8dbbe65..1e2669648a24 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-h3.c
> @@ -76,7 +76,8 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video_clk, "pll-video",
> 297000000, /* frac rate 1 */
> BIT(31), /* gate */
> BIT(28), /* lock */
> - CLK_SET_RATE_UNGATE);
> + CLK_SET_RATE_UNGATE,
> + 0); /* features */
>
> static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
> "osc24M", 0x0018,
> diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
> index 31eca0d3bc1e..63907b86ce06 100644
> --- a/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
> +++ b/drivers/clk/sunxi-ng/ccu-sun8i-r40.c
> @@ -82,7 +82,8 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video0_clk, "pll-video0",
> 297000000, /* frac rate 1 */
> BIT(31), /* gate */
> BIT(28), /* lock */
> - CLK_SET_RATE_UNGATE);
> + CLK_SET_RATE_UNGATE,
> + 0); /* features */
>
> /* TODO: The result of N/M is required to be in [8, 25] range. */
> static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK(pll_ve_clk, "pll-ve",
> @@ -169,7 +170,8 @@ static SUNXI_CCU_NM_WITH_FRAC_GATE_LOCK_MIN_MAX(pll_video1_clk, "pll-video1",
> 297000000, /* frac rate 1 */
> BIT(31), /* gate */
> BIT(28), /* lock */
> - CLK_SET_RATE_UNGATE);
> + CLK_SET_RATE_UNGATE,
> + 0); /* features */
>
> static struct ccu_nkm pll_sata_clk = {
> .enable = BIT(31),
> diff --git a/drivers/clk/sunxi-ng/ccu_nm.c b/drivers/clk/sunxi-ng/ccu_nm.c
> index c1fd11542c45..97d8d9e3255c 100644
> --- a/drivers/clk/sunxi-ng/ccu_nm.c
> +++ b/drivers/clk/sunxi-ng/ccu_nm.c
> @@ -6,6 +6,7 @@
>
> #include <linux/clk-provider.h>
> #include <linux/io.h>
> +#include <linux/rational.h>
>
> #include "ccu_frac.h"
> #include "ccu_gate.h"
> @@ -56,6 +57,18 @@ static unsigned long ccu_nm_find_best(unsigned long parent, unsigned long rate,
> return best_rate;
> }
>
> +static unsigned long ccu_nm_find_best_closest(unsigned long parent, unsigned long rate,
> + struct _ccu_nm *nm)
> +{
> + unsigned long best_rate = 0;
> +
> + rational_best_approximation(rate, parent, nm->max_n, nm->max_m, &nm->n, &nm->m);
> +
> + best_rate = ccu_nm_calc_rate(parent, nm->n, nm->m);
> +
> + return best_rate;
> +}
> +
> static void ccu_nm_disable(struct clk_hw *hw)
> {
> struct ccu_nm *nm = hw_to_ccu_nm(hw);
> @@ -159,7 +172,10 @@ static long ccu_nm_round_rate(struct clk_hw *hw, unsigned long rate,
> _nm.min_m = 1;
> _nm.max_m = nm->m.max ?: 1 << nm->m.width;
>
> - rate = ccu_nm_find_best(*parent_rate, rate, &_nm);
> + if (nm->common.features & CCU_FEATURE_CLOSEST_RATE)
> + rate = ccu_nm_find_best_closest(*parent_rate, rate, &_nm);
> + else
> + rate = ccu_nm_find_best(*parent_rate, rate, &_nm);
So this ends up creating a completely different path and algo for the
"closest" case, and I'm not super comfortable with that.
I think you can simplify this a bit by creating a comparison function
that will take two rates and a set of flags and will behave differently
depending on whether CCU_FEATURE_CLOSEST_RATE is set, like
mux_is_better_rate is doing for example.
You'll also avoid code duplication that way that can be shown a bit in
you subsequent patches.
>
> if (nm->common.features & CCU_FEATURE_FIXED_POSTDIV)
> rate /= nm->fixed_post_div;
> @@ -210,7 +226,10 @@ static int ccu_nm_set_rate(struct clk_hw *hw, unsigned long rate,
> &_nm.m, &_nm.n);
> } else {
> ccu_sdm_helper_disable(&nm->common, &nm->sdm);
> - ccu_nm_find_best(parent_rate, rate, &_nm);
> + if (nm->common.features & CCU_FEATURE_CLOSEST_RATE)
> + ccu_nm_find_best_closest(parent_rate, rate, &_nm);
> + else
> + ccu_nm_find_best(parent_rate, rate, &_nm);
> }
>
> spin_lock_irqsave(nm->common.lock, flags);
> diff --git a/drivers/clk/sunxi-ng/ccu_nm.h b/drivers/clk/sunxi-ng/ccu_nm.h
> index 2904e67f05a8..a3825c4e8d42 100644
> --- a/drivers/clk/sunxi-ng/ccu_nm.h
> +++ b/drivers/clk/sunxi-ng/ccu_nm.h
> @@ -116,7 +116,8 @@ struct ccu_nm {
> _frac_en, _frac_sel, \
> _frac_rate_0, \
> _frac_rate_1, \
> - _gate, _lock, _flags) \
> + _gate, _lock, _flags, \
> + _features) \
> struct ccu_nm _struct = { \
> .enable = _gate, \
> .lock = _lock, \
> @@ -129,7 +130,8 @@ struct ccu_nm {
> .max_rate = _max_rate, \
> .common = { \
> .reg = _reg, \
> - .features = CCU_FEATURE_FRACTIONAL, \
> + .features = CCU_FEATURE_FRACTIONAL | \
> + _features, \
It's a bit odd to me that some features are set by the macro function,
and some are passed as an argument. I'm fine with either but we
shouldn't allow both.
It looks like (for NM clocks at least) we would only need the round
closest flag for pll-video0, so we could maybe just add a new variant of
the macro which will also reduce the changes in that patch.
Maxime
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20230703/a23287a0/attachment.sig>
More information about the linux-arm-kernel
mailing list