[PATCH v1] thermal: sun8i: extend H6 calibration function to support 4 sensors

Andre Przywara andre.przywara at arm.com
Mon Dec 18 03:14:04 PST 2023


On Sun, 17 Dec 2023 16:36:36 +0300
Maksim Kiselev <bigunclemax at gmail.com> wrote:

Hi Maksim,

many thanks for sending this!

> The H616 SoC resembles the H6 thermal sensor controller, with a few
> changes like four sensors.
> 
> Extend sun50i_h6_ths_calibrate() function to support calibration of
> these sensors.

Oh wow, I didn't expect that, but it's indeed that simple: we just need to
cater for the 4th sensor's data to be cramped into the other bits, the
rest is exactly the same! Well spotted!

> Signed-off-by: Martin Botka <martin.botka at somainline.org>
> Signed-off-by: Andre Przywara <andre.przywara at arm.com>

I don't think the Signed-off-by:s are accurate here. Please replace those
two with just:
Co-developed-by: Martin Botka <martin.botka at somainline.org>
(I didn't really do anything in those parts)

> Signed-off-by: Maksim Kiselev <bigunclemax at gmail.com>

I compared the two routines and came to the same solution as you, so:

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

I will incorporate this patch into the next submission of the H616 THS
series, so there is no need to merge this patch as is.

Cheers,
Andre

> ---
>  drivers/thermal/sun8i_thermal.c | 28 ++++++++++++++++++++--------
>  1 file changed, 20 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c
> index f989b55a8aa8..9af95b4785be 100644
> --- a/drivers/thermal/sun8i_thermal.c
> +++ b/drivers/thermal/sun8i_thermal.c
> @@ -221,16 +221,21 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
>  	struct device *dev = tmdev->dev;
>  	int i, ft_temp;
>  
> -	if (!caldata[0] || callen < 2 + 2 * tmdev->chip->sensor_num)
> +	if (!caldata[0])
>  		return -EINVAL;
>  
>  	/*
>  	 * efuse layout:
>  	 *
> -	 *	0   11  16	 32
> -	 *	+-------+-------+-------+
> -	 *	|temp|  |sensor0|sensor1|
> -	 *	+-------+-------+-------+
> +	 * 0      11  16     27   32     43   48    57
> +	 * +----------+-----------+-----------+-----------+
> +	 * |  temp |  |sensor0|   |sensor1|   |sensor2|   |
> +	 * +----------+-----------+-----------+-----------+
> +	 *                      ^           ^           ^
> +	 *                      |           |           |
> +	 *                      |           |           sensor3[11:8]
> +	 *                      |           sensor3[7:4]
> +	 *                      sensor3[3:0]
>  	 *
>  	 * The calibration data on the H6 is the ambient temperature and
>  	 * sensor values that are filled during the factory test stage.
> @@ -243,9 +248,16 @@ static int sun50i_h6_ths_calibrate(struct ths_device *tmdev,
>  	ft_temp = (caldata[0] & FT_TEMP_MASK) * 100;
>  
>  	for (i = 0; i < tmdev->chip->sensor_num; i++) {
> -		int sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
> -		int cdata, offset;
> -		int sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
> +		int sensor_reg, sensor_temp, cdata, offset;
> +
> +		if (i == 3)
> +			sensor_reg = (caldata[1] >> 12)
> +				     | ((caldata[2] >> 12) << 4)
> +				     | ((caldata[3] >> 12) << 8);
> +		else
> +			sensor_reg = caldata[i + 1] & TEMP_CALIB_MASK;
> +
> +		sensor_temp = tmdev->chip->calc_temp(tmdev, i, sensor_reg);
>  
>  		/*
>  		 * Calibration data is CALIBRATE_DEFAULT - (calculated




More information about the linux-arm-kernel mailing list