[PATCH] ARM: dts: stm32mp15x: Consolidate usbh_[eo]hci phy properties

[Alexandre TORGUE]

Hi Uwe

On 12/6/23 09:48, Uwe Kleine-König wrote:
> Hello,
> 
> On Wed, Dec 06, 2023 at 09:31:43AM +0100, Uwe Kleine-König wrote:
>> diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
>> index 511113f2e399..704c0d0cfe5f 100644
>> --- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
>> +++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
>> @@ -680,8 +680,6 @@ &usart3 {
>>   };
>>   
>>   &usbh_ehci {
>> -	phys = <&usbphyc_port0>;
>> -	status = "okay";
> 
> the status property must be kept. I will wait a bit for further review
> and then resend (unless this patch is picked up with this issue fixed
> up).

Applied with the fix. First I had a small doubt about the patch as we 
can also choose usbphyc_port1 for USB host but as usbphyc_port0 remains 
always connected to the USB host then your patch makes completely sens.

Regards
Alex


> Best regards
> Uwe
>