[PATCH v3 00/14] arm64: dts: imx8mm-kontron: DT updates

Shawn Guo shawnguo at kernel.org
Wed Dec 13 01:31:34 PST 2023


On Wed, Dec 06, 2023 at 03:41:03PM +0100, Frieder Schrempf wrote:
> From: Frieder Schrempf <frieder.schrempf at kontron.de>
...
>  arch/arm64/boot/dts/freescale/Makefile        |   4 +
>  .../dts/freescale/imx8mm-kontron-bl-osm-s.dts | 295 +++------
>  .../boot/dts/freescale/imx8mm-kontron-bl.dts  | 198 +++++-
>  .../boot/dts/freescale/imx8mm-kontron-dl.dtso | 201 +++++++
>  .../dts/freescale/imx8mm-kontron-osm-s.dtsi   | 567 +++++++++++++++++-
>  .../boot/dts/freescale/imx8mm-kontron-sl.dtsi |   4 +-
>  6 files changed, 1035 insertions(+), 234 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso

A couple of things:

- I have to use 'git am -3' apply some of the patches.  Could you rebase
  the series on imx/dt64 branch?

- There are a few DTC warnings that need to be addressed.

../arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts:235.34-238.7: Warning (graph_endpoint): /soc at 0/bus at 30800000/i2c at 30a40000/bridge at 2c/ports/port at 0/endpoint: graph connection to node '/soc at 0/bus at 32c00000/dsi at 32e10000/ports/port at 1/endpoint' is not bidirectional

arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtbo: Warning (graph_port): /fragment at 3: graph port node name should be 'port'
../arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso:61.17-63.3: Warning (graph_endpoint): /fragment at 3/__overlay__: graph endpoint node name should be 'endpoint'

Shawn



More information about the linux-arm-kernel mailing list