[PATCH v3 2/2] arm64: dts: ti: k3-j721s2-evm: Add overlay for PCIE1 Endpoint Mode

[Andrew Davis]

On 12/11/23 5:55 AM, Siddharth Vadapalli wrote:
> Add overlay to enable the PCIE1 instance of PCIe on J721S2-EVM in
> Endpoint mode of operation.
> 
> Signed-off-by: Siddharth Vadapalli <s-vadapalli at ti.com>
> Reviewed-by: Ravi Gunasekaran <r-gunasekaran at ti.com>
> ---

Reviewed-by: Andrew Davis <afd at ti.com>

>   arch/arm64/boot/dts/ti/Makefile               |  6 ++-
>   .../boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso   | 53 +++++++++++++++++++
>   2 files changed, 58 insertions(+), 1 deletion(-)
>   create mode 100644 arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
> 
> diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
> index c6606b7678a3..52c1dc910308 100644
> --- a/arch/arm64/boot/dts/ti/Makefile
> +++ b/arch/arm64/boot/dts/ti/Makefile
> @@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-common-proc-board.dtb
>   dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
>   k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
>   dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
> +dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
>   
>   # Boards with J784s4 SoC
>   dtb-$(CONFIG_ARCH_K3) += k3-am69-sk.dtb
> @@ -106,6 +107,8 @@ k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
>   	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-wlan.dtbo
>   k3-j721e-evm-pcie0-ep-dtbs := k3-j721e-common-proc-board.dtb \
>   	k3-j721e-evm-pcie0-ep.dtbo
> +k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
> +	k3-j721s2-evm-pcie1-ep.dtbo
>   dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
>   	k3-am625-beagleplay-csi2-tevi-ov5640.dtb \
>   	k3-am625-sk-csi2-imx219.dtb \
> @@ -117,7 +120,8 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
>   	k3-am62a7-sk-csi2-ov5640.dtb \
>   	k3-am642-tqma64xxl-mbax4xxl-sdcard.dtb \
>   	k3-am642-tqma64xxl-mbax4xxl-wlan.dtb \
> -	k3-j721e-evm-pcie0-ep.dtb
> +	k3-j721e-evm-pcie0-ep.dtb \
> +	k3-j721s2-evm-pcie1-ep.dtb
>   
>   # Enable support for device-tree overlays
>   DTC_FLAGS_k3-am625-beagleplay += -@
> diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
> new file mode 100644
> index 000000000000..43568eb67d93
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-pcie1-ep.dtso
> @@ -0,0 +1,53 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/**
> + * DT Overlay for enabling PCIE1 instance in Endpoint Configuration with the
> + * J7 common processor board.
> + *
> + * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
> + *
> + * Copyright (C) 2023 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/ti,sci_pm_domain.h>
> +
> +#include "k3-pinctrl.h"
> +
> +/*
> + * Since Root Complex and Endpoint modes are mutually exclusive
> + * disable Root Complex mode.
> + */
> +&pcie1_rc {
> +	status = "disabled";
> +};
> +
> +&cbass_main {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	interrupt-parent = <&gic500>;
> +
> +	pcie1_ep: pcie-ep at 2910000 {
> +		compatible = "ti,j7200-pcie-ep", "ti,j721e-pcie-ep";
> +		reg = <0x00 0x02910000 0x00 0x1000>,
> +		      <0x00 0x02917000 0x00 0x400>,
> +		      <0x00 0x0d800000 0x00 0x00800000>,
> +		      <0x00 0x18000000 0x00 0x08000000>;
> +		reg-names = "intd_cfg", "user_cfg", "reg", "mem";
> +		interrupt-names = "link_state";
> +		interrupts = <GIC_SPI 330 IRQ_TYPE_EDGE_RISING>;
> +		ti,syscon-pcie-ctrl = <&scm_conf 0x074>;
> +		max-link-speed = <3>;
> +		num-lanes = <1>;
> +		power-domains = <&k3_pds 276 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 276 41>;
> +		clock-names = "fck";
> +		max-functions = /bits/ 8 <6>;
> +		max-virtual-functions = /bits/ 8 <4 4 4 4 0 0>;
> +		dma-coherent;
> +		phys = <&serdes0_pcie_link>;
> +		phy-names = "pcie-phy";
> +	};
> +};