[PATCH v3 2/2] i2c: aspeed: Acknowledge Tx done with and without ACK irq late

Quan Nguyen quan at os.amperecomputing.com
Sun Dec 10 20:06:12 PST 2023



On 08/12/2023 11:00, Andrew Jeffery wrote:
> On Fri, 2023-12-08 at 10:31 +0700, Quan Nguyen wrote:
>> Commit 2be6b47211e1 ("i2c: aspeed: Acknowledge most interrupts early in
>> interrupt handler") acknowledges most interrupts early before the slave
>> irq handler is executed, except for the "Receive Done Interrupt status"
>> which is acknowledged late in the interrupt.
>> However, it has been observed that the early acknowledgment of "Transmit
>> Done Interrupt Status" (with ACK or NACK) often causes the interrupt to
>> be raised in READ REQUEST state, that shows the
>> "Unexpected ACK on read request." complaint messages.
>>
>> Assuming that the "Transmit Done" interrupt should only be acknowledged
>> once it is truly processed, this commit fixes that issue by acknowledging
>> interrupts for both ACK and NACK cases late in the interrupt handler.
>>
>> Fixes: 2be6b47211e1 ("i2c: aspeed: Acknowledge most interrupts early in interrupt handler")
>> Signed-off-by: Quan Nguyen <quan at os.amperecomputing.com>
>> ---
>> v3:
>>    + Fix the unconditinal write when ack the irqs               [Andrew]
>>    + Refactor the code to enhance code readability                [Quan]
>>    + Fix grammar in commit message                                [Quan]
>>
>> v2:
>>    + Split to separate series                                     [Joel]
>>    + Added the Fixes line                                         [Joel]
>>    + Fixed multiline comment                                      [Joel]
>>    + Refactor irq clearing code                          [Joel, Guenter]
>>    + Revised commit message                                       [Joel]
>>    + Revised commit message                                       [Quan]
>>    + About a note to remind why the readl() should immediately follow the
>> writel() to fix the race condition when clearing irq status from commit
>> c926c87b8e36 ("i2c: aspeed: Avoid i2c interrupt status clear race
>> condition"), I think it looks straight forward in this patch and decided
>> not to add that note.                                            [Joel]
>>
>> v1:
>>    + First introduced in
>> https://lore.kernel.org/all/20210519074934.20712-1-quan@os.amperecomputing.com/
>> ---
>>   drivers/i2c/busses/i2c-aspeed.c | 21 +++++++++++++--------
>>   1 file changed, 13 insertions(+), 8 deletions(-)
>>
>> diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
>> index 1c2a4f4c4e1b..967a26dd4ffa 100644
>> --- a/drivers/i2c/busses/i2c-aspeed.c
>> +++ b/drivers/i2c/busses/i2c-aspeed.c
>> @@ -617,13 +617,19 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
>>   static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
>>   {
>>   	struct aspeed_i2c_bus *bus = dev_id;
>> -	u32 irq_received, irq_remaining, irq_handled;
>> +	u32 irq_received, irq_remaining, irq_handled, irq_ack_last;
> 
> `irq_ack_last` might be better as a macro, but you're probably saved by
> the optimiser anyway. If there's another reason to do a v4 or others
> are unhappy with it then consider fixing it, otherwise:
> 
> Reviewed-by: Andrew Jeffery <andrew at codeconstruct.com.au>
> 

I'll send out the v4 to use the defined macro instead as below:

Thanks Andi, for the suggestion on the macro name.

diff --git a/drivers/i2c/busses/i2c-aspeed.c 
b/drivers/i2c/busses/i2c-aspeed.c
index 5511fd46a65e..0f67218cf04a 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -93,6 +93,10 @@
  		 ASPEED_I2CD_INTR_RX_DONE | \
  		 ASPEED_I2CD_INTR_TX_NAK |  \
  		 ASPEED_I2CD_INTR_TX_ACK)
+#define ASPEED_I2CD_INTR_ACK_RX_TX	    \
+		(ASPEED_I2CD_INTR_RX_DONE | \
+		 ASPEED_I2CD_INTR_TX_ACK |  \
+		 ASPEED_I2CD_INTR_TX_NAK)

Thanks for the review,
- Quan



More information about the linux-arm-kernel mailing list