[PATCH] ARM: dts: microchip: sama5d27_wlsom1_ek: Remove mmc-ddr-3_3v property from sdmmc0 node
claudiu beznea
claudiu.beznea at tuxon.dev
Sat Dec 9 04:56:04 PST 2023
On 04.12.2023 09:25, Mihai Sain wrote:
> On board the sdmmc0 interface is wired to a SD Card socket.
> According with mmc-controller bindings, the mmc-ddr-3_3v property
> is used for eMMC devices to enable high-speed DDR mode (3.3V I/O).
> Remove the mmc-ddr-3_3v property from sdmmc0 node.
>
> Signed-off-by: Mihai Sain <mihai.sain at microchip.com>
Applied to at91-dt, thanks!
> ---
> arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts | 1 -
> 1 file changed, 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
> index e055b9e2fe34..15239834d886 100644
> --- a/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
> +++ b/arch/arm/boot/dts/microchip/at91-sama5d27_wlsom1_ek.dts
> @@ -197,7 +197,6 @@ qspi1_flash: flash at 0 {
>
> &sdmmc0 {
> bus-width = <4>;
> - mmc-ddr-3_3v;
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_sdmmc0_default>;
> status = "okay";
More information about the linux-arm-kernel
mailing list