[PATCH v5 19/20] arm64: dts: exynos: google: Add initial Oriole/pixel 6 board support
William McVicker
willmcvicker at google.com
Fri Dec 1 16:03:37 PST 2023
On 12/01/2023, Peter Griffin wrote:
> Add initial board support for the Pixel 6 phone code named Oriole. This
> has been tested with a minimal busybox initramfs and boots to a shell.
>
> Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
Tested-by: Will McVicker <willmcvicker at google.com>
--
Verified boot to a busybox console on my oriole device.
Thanks,
Will
> ---
> arch/arm64/boot/dts/exynos/Makefile | 2 +
> arch/arm64/boot/dts/exynos/google/Makefile | 4 +
> .../boot/dts/exynos/google/gs101-oriole.dts | 105 ++++++++++++++++++
> 3 files changed, 111 insertions(+)
> create mode 100644 arch/arm64/boot/dts/exynos/google/Makefile
> create mode 100644 arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
>
> diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
> index 6e4ba69268e5..44c24a8ad9e1 100644
> --- a/arch/arm64/boot/dts/exynos/Makefile
> +++ b/arch/arm64/boot/dts/exynos/Makefile
> @@ -1,4 +1,6 @@
> # SPDX-License-Identifier: GPL-2.0
> +subdir-y += google
> +
> dtb-$(CONFIG_ARCH_EXYNOS) += \
> exynos5433-tm2.dtb \
> exynos5433-tm2e.dtb \
> diff --git a/arch/arm64/boot/dts/exynos/google/Makefile b/arch/arm64/boot/dts/exynos/google/Makefile
> new file mode 100644
> index 000000000000..0a6d5e1fe4ee
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +dtb-$(CONFIG_ARCH_EXYNOS) += \
> + gs101-oriole.dtb \
> diff --git a/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> new file mode 100644
> index 000000000000..6abd00fa337e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/google/gs101-oriole.dts
> @@ -0,0 +1,105 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Oriole Device Tree
> + *
> + * Copyright 2021-2023 Google,LLC
> + * Copyright 2023 Linaro Ltd - <peter.griffin at linaro.org>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include "gs101-pinctrl.h"
> +#include "gs101.dtsi"
> +
> +/ {
> + model = "Oriole";
> + compatible = "google,gs101-oriole", "google,gs101";
> +
> + aliases {
> + serial0 = &serial_0;
> + };
> +
> + chosen {
> + /* Bootloader expects bootargs specified otherwise it crashes */
> + bootargs = "";
> + stdout-path = &serial_0;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&key_voldown>, <&key_volup>, <&key_power>;
> +
> + button-vol-down {
> + label = "KEY_VOLUMEDOWN";
> + linux,code = <KEY_VOLUMEDOWN>;
> + gpios = <&gpa7 3 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + };
> +
> + button-vol-up {
> + label = "KEY_VOLUMEUP";
> + linux,code = <KEY_VOLUMEUP>;
> + gpios = <&gpa8 1 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + };
> +
> + button-power {
> + label = "KEY_POWER";
> + linux,code = <KEY_POWER>;
> + gpios = <&gpa10 1 GPIO_ACTIVE_LOW>;
> + wakeup-source;
> + };
> + };
> +};
> +
> +&ext_24_5m {
> + clock-frequency = <24576000>;
> +};
> +
> +&ext_200m {
> + clock-frequency = <200000000>;
> +};
> +
> +&pinctrl_far_alive {
> + key_voldown: key-voldown-pins {
> + samsung,pins = "gpa7-3";
> + samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +
> + key_volup: key-volup-pins {
> + samsung,pins = "gpa8-1";
> + samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +};
> +
> +&pinctrl_gpio_alive {
> + key_power: key-power-pins {
> + samsung,pins = "gpa10-1";
> + samsung,pin-function = <GS101_PIN_FUNC_EINT>;
> + samsung,pin-pud = <GS101_PIN_PULL_NONE>;
> + samsung,pin-drv = <GS101_PIN_DRV_2_5_MA>;
> + };
> +};
> +
> +&serial_0 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_bus>;
> +};
> +
> +&usi_uart {
> + status = "okay";
> + samsung,clkreq-on; /* needed for UART mode */
> +};
> +
> +&watchdog_cl0 {
> + timeout-sec = <30>;
> + status = "okay";
> +};
> --
> 2.43.0.rc2.451.g8631bc7472-goog
>
More information about the linux-arm-kernel
mailing list