[PATCH] pwm: atmel: add missing clk_disable_unprepare()

[claudiu beznea]

On 8/22/23 10:04, Hari Prasath Gujulan Elango wrote:
> Fix the below smatch warning:
> 
> drivers/pwm/pwm-atmel-hlcdc.c:167 atmel_hlcdc_pwm_apply() warn: 'new_clk' from clk_prepare_enable() not released on lines: 112,137,142,149.
> 

Can you add a fixes tag?

> Signed-off-by: Hari Prasath Gujulan Elango <Hari.PrasathGE at microchip.com>
> ---
>  drivers/pwm/pwm-atmel-hlcdc.c | 17 +++++++++++++----
>  1 file changed, 13 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
> index 96a709a9d49a..ce46f6c74a14 100644
> --- a/drivers/pwm/pwm-atmel-hlcdc.c
> +++ b/drivers/pwm/pwm-atmel-hlcdc.c
> @@ -108,8 +108,10 @@ static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
>  						 ATMEL_HLCDC_CFG(0),
>  						 ATMEL_HLCDC_CLKPWMSEL,
>  						 gencfg);
> -			if (ret)
> +			if (ret) {
> +				clk_disable_unprepare(new_clk);
>  				return ret;
> +			}
>  		}
>  
>  		do_div(pwmcval, state->period);
> @@ -133,20 +135,27 @@ static int atmel_hlcdc_pwm_apply(struct pwm_chip *c, struct pwm_device *pwm,
>  					 ATMEL_HLCDC_PWMPS_MASK |
>  					 ATMEL_HLCDC_PWMPOL,
>  					 pwmcfg);
> -		if (ret)
> +		if (ret) {
> +			clk_disable_unprepare(new_clk);
>  			return ret;
> +		}
>  
>  		ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_EN,
>  				   ATMEL_HLCDC_PWM);
> -		if (ret)
> +		if (ret) {
> +			clk_disable_unprepare(new_clk);
>  			return ret;
> +		}
>  
>  		ret = regmap_read_poll_timeout(hlcdc->regmap, ATMEL_HLCDC_SR,
>  					       status,
>  					       status & ATMEL_HLCDC_PWM,
>  					       10, 0);
> -		if (ret)
> +		if (ret) {
> +			clk_disable_unprepare(new_clk);

Can you keep a single failure point for all these?

Also, you have to set chip->cur_clk = NULL otherwise next time your apply
will get executed the new_clk will not be enabled.

Thank you,
Claudiu Beznea

>  			return ret;
> +		}
> +
>  	} else {
>  		ret = regmap_write(hlcdc->regmap, ATMEL_HLCDC_DIS,
>  				   ATMEL_HLCDC_PWM);