[PATCH v14 0/6] drm/imx: Introduce i.MX8qm/qxp DPU DRM
Ying Liu
victor.liu at nxp.com
Mon Aug 21 22:36:14 PDT 2023
Hi,
> On Friday, January 6, 2023 1:50 PM Ying Liu wrote:
>
> Hi,
>
>
> This is the v14 series to introduce i.MX8qm/qxp Display Processing Unit(DPU)
> DRM support.
>
> DPU is comprised of a blit engine for 2D graphics, a display controller
> and a command sequencer. Outside of DPU, optional prefetch engines can
> fetch data from memory prior to some DPU fetchunits of blit engine and
> display controller. The pre-fetchers support linear formats and Vivante
> GPU tile formats.
>
> Reference manual can be found at:
> https://www.nxp.com/webapp/Download?colCode=IMX8DQXPRM
>
>
> This patch set adds kernel modesetting support for the display controller part.
> It supports two CRTCs per display controller, several planes, prefetch
> engines and some properties of CRTC and plane. Currently, the registers of
> the controller is accessed without command sequencer involved, instead just
> by
> using CPU. DRM connectors would be created from the DPU KMS driver.
>
>
> Patch 1 ~ 3 add dt-bindings for DPU and prefetch engines.
> Patch 4 is a minor improvement of a macro to suppress warning as the KMS
> driver
> uses it.
> Patch 5 introduces the DPU DRM support.
> Patch 6 updates MAINTAINERS.
>
> Welcome comments, thanks.
>
> v13->v14:
> * Rebase the patch series to the latest drm-misc-next branch(v6.1-rc6 based).
> * Include drm_fbdev_generic.h in dpu_drv.c due to the rebase.
> * Fix dpu drm driver suspend/resume by properly get drm device through
> dev_get_drvdata().
> * Use pm_ptr() macro for dpu core driver PM operations.
> * Use pm_sleep_ptr() macro for dpu drm driver PM operations.
> * Use DEFINE_SIMPLE_DEV_PM_OPS() macro to define dpu drm driver PM
> operations,
> instead of SIMPLE_DEV_PM_OPS().
> * Update year of Copyright.
> * Add SoC series name 'i.MX8'/'IMX8'/'imx8' to dpu driver module decription,
> Kconfig name, dpu driver names and dpu driver object name.
>
> v12->v13:
> * Drop 'drm->irq_enabled = true;' from patch 5/6 to fix a potential build
> break reported by 'kernel test robot <lkp at intel.com>'. drm->irq_enabled
> should not be used by imx-dpu drm as it is only used by legacy drivers
> with userspace modesetting.
>
> v11->v12:
> * Rebase the series upon v6.1-rc1.
> * Minor update on Kconfigs, struct names and macro names for patch 5/6
> due to the rebase.
>
> v10->v11:
> * Rebase the series upon v6.0-rc1.
> * Include drm_blend.h and drm_framebuffer.h in dpu-kms.c and dpu-
> plane.c
> to fix build errors due to the rebase.
> * Fix a checkpatch warning for dpu-crtc.c.
> * Properly use dev_err_probe() to return it's return value directly where
> possible.
>
> v9->v10:
> * Rebase the series upon v5.18-rc1.
> * Make 'checkpatch.pl --strict' happier for patch 5/6.
> * Add Rob's R-b tag on patch 3/6.
> * Add Laurentiu's R-b tag on patch 5/6.
> * Add Laurentiu's A-b tag on patch 6/6.
>
> v8->v9:
> * Use drm_atomic_get_new_plane_state() in dpu_plane_atomic_update()
> for
> patch 5/6. (Laurentiu)
> * Drop getting DPU DT alias ID for patch 5/6, as it is unused.
> * Reference 'interrupts-extended' schema instead of 'interrupts' for patch
> 3/6
> to require an additional DPR interrupt(r_rtram_stall) because the reference
> manual does mention it, though the driver doesn't get/use it for now.
> Reference 'interrupt-names' schema to define the two DPR interrupt names
> -
> 'dpr_wrap' and 'r_rtram_stall'. Accordingly, patch 5/6 gets the 'dpr_wrap'
> interrupt by name.
> * Drop Rob's R-b tag on patch 3/6, as review is needed.
>
> v7->v8:
> * Rebase this series up onto the latest drm-misc-next branch, due to DRM
> plane
> helper functions API change(atomic_check and atomic_update) from DRM
> atomic
> core. So, dpu_plane_atomic_check() and dpu_plane_atomic_update() are
> updated
> accordingly in patch 5/6. Also, rename plane->state variables and relevant
> DPU plane state variables in those two functions to reflect they are new
> states, like the patch 'drm: Rename plane->state variables in atomic update
> and disable' recently landed in drm-misc-next.
> * Replace drm_gem_fb_prepare_fb() with
> drm_gem_plane_helper_prepare_fb() in
> patch 5/6, due to DRM core API change.
> * Improve DPR burst length for GPU standard tile and 32bpp GPU super tile in
> patch 5/6 to align with the latest version of internal HW documention.
>
> v6->v7:
> * Fix return value of dpu_get_irqs() if platform_get_irq() fails. (Laurentiu)
> * Use the function array dpu_irq_handler[] to store individual DPU irq
> handlers.
> (Laurentiu)
> * Call get/put() hooks directly to get/put DPU fetchunits for DPU plane groups.
> (Laurentiu)
> * Shorten the names of individual DPU irq handlers by using DPU unit abbrev
> names to make writing dpu_irq_handler[] easier.
> * Add Rob's R-b tag back on DPU dt-binding patch as change in v6 was
> reviewed.
>
> v5->v6:
> * Use graph schema in the DPU dt-binding.
> * Do not use macros where possible in the DPU DRM driver. (Laurentiu)
> * Break dpu_plane_atomic_check() into some smaller functions. (Laurentiu)
> * Address some minor comments from Laurentiu on the DPU DRM driver.
> * Add dpu_crtc_err() helper marco in the DPU DRM driver to tell dmesg
> which CRTC generates error.
> * Drop calling dev_set_drvdata() from dpu_drm_bind/unbind() in the DPU
> DRM
> driver as it is done in dpu_drm_probe().
> * Some trivial tweaks.
>
> v4->v5:
> * Rebase up onto the latest drm-misc-next branch and remove the hook to
> drm_atomic_helper_legacy_gamma_set() from patch 5/6, because it was
> dropped
> by the newly landed commit 'drm: automatic legacy gamma support'.
> * Remove a redundant blank line from dpu_plane_atomic_update() in patch
> 5/6.
>
> v3->v4:
> * Improve compatible properties in DPU and prefetch engines' dt bindings
> by using enum instead of oneOf+const.
> * Add Rob's R-b tags on dt binding patches(patch 1/6, 2/6 and 3/6).
> * Add Daniel's A-b tag on patch 4/6.
>
> v2->v3:
> * Fix DPU DRM driver build warnings which are
> Reported-by: kernel test robot <lkp at intel.com>.
> * Drop DPU DRM driver build dependency on IMX_SCU, as dummy SCU
> functions have
> been added in header files by the patch 'firmware: imx: add dummy
> functions'
> which has landed in linux-next/master branch.
> * Add a missing blank line in include/drm/drm_atomic.h.
>
> v1->v2:
> * Test this patch set also with i.MX8qm LVDS displays.
> * Drop the device tree patches because we'll use new dt binding way to
> support i.MX8qm/qxp clocks. This depends on a not-yet-landed patch set
> to do basic conversions for the platforms.
> * Fix dt binding yamllint warnings.
> * Require bypass0 and bypass1 clocks for both i.MX8qxp and i.MX8qm in
> DPU's
> dt binding documentation.
> * Use new dt binding way to add clocks in the dt binding examples.
> * Address several comments from Laurentiu on the DPU DRM patch.
>
>
> Liu Ying (6):
> dt-bindings: display: imx: Add i.MX8qxp/qm DPU binding
> dt-bindings: display: imx: Add i.MX8qxp/qm PRG binding
> dt-bindings: display: imx: Add i.MX8qxp/qm DPR channel binding
> drm/atomic: Avoid unused-but-set-variable warning on
> for_each_old_plane_in_state
> drm/imx: Introduce i.MX8qm/qxp DPU DRM
> MAINTAINERS: add maintainer for i.MX8qxp DPU DRM driver
>
> .../display/imx/fsl,imx8qxp-dprc.yaml | 100 ++
> .../bindings/display/imx/fsl,imx8qxp-dpu.yaml | 387 ++++++
> .../bindings/display/imx/fsl,imx8qxp-prg.yaml | 60 +
> MAINTAINERS | 9 +
> drivers/gpu/drm/imx/Kconfig | 1 +
> drivers/gpu/drm/imx/Makefile | 1 +
> drivers/gpu/drm/imx/dpu/Kconfig | 9 +
> drivers/gpu/drm/imx/dpu/Makefile | 10 +
> drivers/gpu/drm/imx/dpu/dpu-constframe.c | 171 +++
> drivers/gpu/drm/imx/dpu/dpu-core.c | 1044 +++++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-crtc.c | 969 +++++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-crtc.h | 72 ++
> drivers/gpu/drm/imx/dpu/dpu-disengcfg.c | 117 ++
> drivers/gpu/drm/imx/dpu/dpu-dprc.c | 715 +++++++++++
> drivers/gpu/drm/imx/dpu/dpu-dprc.h | 40 +
> drivers/gpu/drm/imx/dpu/dpu-drv.c | 294 +++++
> drivers/gpu/drm/imx/dpu/dpu-drv.h | 28 +
> drivers/gpu/drm/imx/dpu/dpu-extdst.c | 299 +++++
> drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c | 292 +++++
> drivers/gpu/drm/imx/dpu/dpu-fetcheco.c | 224 ++++
> drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c | 152 +++
> drivers/gpu/drm/imx/dpu/dpu-fetchunit.c | 610 ++++++++++
> drivers/gpu/drm/imx/dpu/dpu-fetchunit.h | 195 +++
> drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c | 248 ++++
> drivers/gpu/drm/imx/dpu/dpu-framegen.c | 395 +++++++
> drivers/gpu/drm/imx/dpu/dpu-gammacor.c | 223 ++++
> drivers/gpu/drm/imx/dpu/dpu-hscaler.c | 275 +++++
> drivers/gpu/drm/imx/dpu/dpu-kms.c | 542 +++++++++
> drivers/gpu/drm/imx/dpu/dpu-kms.h | 23 +
> drivers/gpu/drm/imx/dpu/dpu-layerblend.c | 348 ++++++
> drivers/gpu/drm/imx/dpu/dpu-plane.c | 804 +++++++++++++
> drivers/gpu/drm/imx/dpu/dpu-plane.h | 59 +
> drivers/gpu/drm/imx/dpu/dpu-prg.c | 433 +++++++
> drivers/gpu/drm/imx/dpu/dpu-prg.h | 45 +
> drivers/gpu/drm/imx/dpu/dpu-prv.h | 231 ++++
> drivers/gpu/drm/imx/dpu/dpu-tcon.c | 250 ++++
> drivers/gpu/drm/imx/dpu/dpu-vscaler.c | 308 +++++
> drivers/gpu/drm/imx/dpu/dpu.h | 385 ++++++
> include/drm/drm_atomic.h | 5 +-
> 39 files changed, 10372 insertions(+), 1 deletion(-)
> create mode 100644
> Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dprc.yaml
> create mode 100644
> Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dpu.yaml
> create mode 100644
> Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-prg.yaml
> create mode 100644 drivers/gpu/drm/imx/dpu/Kconfig
> create mode 100644 drivers/gpu/drm/imx/dpu/Makefile
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-constframe.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-core.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-crtc.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-disengcfg.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-dprc.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-drv.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-extdst.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchdecode.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetcheco.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchlayer.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchunit.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-fetchwarp.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-framegen.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-gammacor.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-hscaler.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-kms.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-layerblend.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-plane.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prg.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-prv.h
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-tcon.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu-vscaler.c
> create mode 100644 drivers/gpu/drm/imx/dpu/dpu.h
>
> --
> 2.37.1
This patch series has been submitted for a quite long period of time.
Anything I can do to have it landed ?
Regards,
Liu Ying
More information about the linux-arm-kernel
mailing list