[PATCH -next 11/11] gpio: zynq: Use helper function devm_clk_get_enabled()
Li Zetao
lizetao1 at huawei.com
Fri Aug 18 02:30:18 PDT 2023
Since commit 7ef9651e9792 ("clk: Provide new devm_clk helpers for
prepared and enabled clocks"), devm_clk_get() and clk_prepare_enable()
can now be replaced by devm_clk_get_enabled() when the driver enables
(and possibly prepares) the clocks for the whole lifetime of the device.
Moreover, it is no longer necessary to unprepare and disable the clocks
explicitly.
Signed-off-by: Li Zetao <lizetao1 at huawei.com>
---
drivers/gpio/gpio-zynq.c | 13 +++----------
1 file changed, 3 insertions(+), 10 deletions(-)
diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c
index 0a7264aabe48..98cb38c95837 100644
--- a/drivers/gpio/gpio-zynq.c
+++ b/drivers/gpio/gpio-zynq.c
@@ -918,15 +918,10 @@ static int zynq_gpio_probe(struct platform_device *pdev)
chip->ngpio = gpio->p_data->ngpio;
/* Retrieve GPIO clock */
- gpio->clk = devm_clk_get(&pdev->dev, NULL);
+ gpio->clk = devm_clk_get_enabled(&pdev->dev, NULL);
if (IS_ERR(gpio->clk))
- return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk), "input clock not found.\n");
-
- ret = clk_prepare_enable(gpio->clk);
- if (ret) {
- dev_err(&pdev->dev, "Unable to enable clock.\n");
- return ret;
- }
+ return dev_err_probe(&pdev->dev, PTR_ERR(gpio->clk),
+ "input clock not found or unable to enable clock.\n");
spin_lock_init(&gpio->dirlock);
@@ -977,7 +972,6 @@ static int zynq_gpio_probe(struct platform_device *pdev)
pm_runtime_put(&pdev->dev);
err_pm_dis:
pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(gpio->clk);
return ret;
}
@@ -997,7 +991,6 @@ static int zynq_gpio_remove(struct platform_device *pdev)
if (ret < 0)
dev_warn(&pdev->dev, "pm_runtime_get_sync() Failed\n");
gpiochip_remove(&gpio->chip);
- clk_disable_unprepare(gpio->clk);
device_set_wakeup_capable(&pdev->dev, 0);
pm_runtime_disable(&pdev->dev);
return 0;
--
2.34.1
More information about the linux-arm-kernel
mailing list