[PATCH v3 0/5] Add R5F and C7x DSP nodes for J721S2 SoC.
Andrew Davis
afd at ti.com
Fri Aug 11 13:31:34 PDT 2023
On 8/11/23 3:22 PM, Apurva Nandan wrote:
> This series adds the R5F processor nodes and C7x DSP nodes for
> J721S2 SoC.
>
> The first three patches adds the remote proc nodes to the SoC device
> tree and the last two patches reserves the memory for remote proc IPCs
> on J721S2 EVM board.
>
> Test log: https://gist.githubusercontent.com/apurvanandan1997/556b4148651ae74b50dda993ad07f1e5/raw/
>
> v3: Changelog:
> 1) Disabled c7x in k3-j721s2-main.dtsi and enabled in k3-j721s2-som-p0.dtsi
> which fixes the following dtbs_check for k3-am69-sk.dts
> - dsp at 64800000: 'mboxes' is a required property
> - dsp at 64800000: 'memory-region' is a required property
> 2) Split into separate patches for C7x and R5F
Thanks for taking care of these details, series LGTM,
Reviewed-by: Andrew Davis <afd at ti.com>
>
> Link to v2:
> https://lore.kernel.org/lkml/20230808201842.292911-1-a-nandan@ti.com/
>
> v2:Changelog:
> 1) Added status = "disabled"; in soc dtsi files, and removed it from som dts
> 2) Fixed mboxes property in for all cores in som dts
>
> Link to v1:
> https://lore.kernel.org/all/20230529220941.10801-1-hnagalla@ti.com/
>
> Apurva Nandan (4):
> arm64: dts: ti: k3-j721s2-main: Add MAIN R5F remote processsor nodes
> arm64: dts: ti: k3-j721s2-main: Add C7x remote processsor nodes
> arm64: dts : ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for
> R5F
> arm64: dts : ti: k3-j721s2-som-p0: Add DDR carveout memory nodes for
> C71x DSPs
>
> Hari Nagalla (1):
> arm64: dts: ti: k3-j721s2-mcu: Add MCU R5F cluster nodes
>
> arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 106 +++++++++
> .../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 ++++
> arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 208 ++++++++++++++++++
> 3 files changed, 354 insertions(+)
>
More information about the linux-arm-kernel
mailing list