[PATCH 04/13] arm64: dts: ti: k3-am65: Enable OSPI nodes at the board level

[Dhruva Gole]

Hi Andrew,

On 03/08/23 02:23, Andrew Davis wrote:
> OSPI nodes defined in the top-level AM65x SoC dtsi files are incomplete
> and may not be functional unless they are extended with pinmux and
> device information.
> 
> As the attached OSPI device is only known about at the board integration
> level, these nodes should only be enabled when provided with this
> information.
> 
> Disable the OSPI nodes in the dtsi files and only enable the ones that
> are actually pinned out on a given board.
> 
> Signed-off-by: Andrew Davis <afd at ti.com>
> ---
>   arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi | 1 +
>   arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi            | 2 ++
>   arch/arm64/boot/dts/ti/k3-am654-base-board.dts     | 1 +
>   3 files changed, 4 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> index e26bd988e5224..6041862d5aa75 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
> @@ -593,6 +593,7 @@ adc {
>   };
>   
>   &ospi0 {
> +	status = "okay";

Ok, so this k3-am65-iot2050 series of DT files seem to be structured in
a bit different manner than our SKs and EVMs?

The terminologies like advanced, advanced-m2, basic, etc. are a little
confusing to me. However, I am wondering if we don't do any status = ..
here, and rather make ospi status okays from the iot2050 dts files?

Pardon me if I am making an invalid suggestion, I don't have much
background on these boards.

>   	pinctrl-names = "default";
>   	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
>   
> diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> index 7b1f94a89eca8..2c9c20a9d9179 100644
> --- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> +++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
> @@ -295,6 +295,7 @@ ospi0: spi at 47040000 {
>   			power-domains = <&k3_pds 248 TI_SCI_PD_EXCLUSIVE>;
>   			#address-cells = <1>;
>   			#size-cells = <0>;
> +			status = "disabled";
>   		};
>   
>   		ospi1: spi at 47050000 {
> @@ -309,6 +310,7 @@ ospi1: spi at 47050000 {
>   			power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
>   			#address-cells = <1>;
>   			#size-cells = <0>;
> +			status = "disabled";
>   		};
>   	};
>   
> diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> index 973a89b04a22f..43de7c132d343 100644
> --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
> @@ -530,6 +530,7 @@ &mcu_r5fss0_core1 {
>   };
>   
>   &ospi0 {
> +	status = "okay";
>   	pinctrl-names = "default";
>   	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
>   

-- 
Thanks and Regards,
Dhruva Gole