[PATCH] arm64: dts: ti: k3-am62x-sk-common: Reserve 128MiB of global CMA

[Devarsh Thakkar]

Hi Nishanth,

Thanks for the review.

On 06/08/23 01:03, Nishanth Menon wrote:
> On 16:44-20230803, Devarsh Thakkar wrote:
>> Reserve 128MiB of global CMA which is also marked as re-usable
>> so that OS can also use the same if peripheral drivers are not using the
>> same.
>>
>> AM62x supports multimedia components such as GPU, dual Display and Camera.
>> Assuming the worst-case scenario where all 3 are run in parallel below
>> is the calculation :
>>
>> 1) OV5640 camera sensor supports 1920x1080 resolution
>> -> 1920 width x 1080 height x 2 bytesperpixel x 8 buffers
>>    (default in yavta) : 32MiB
>>
>> 2) 1920x1200 Microtips LVDS panel supported
>> -> 1920 width x 1080 height x 4 bytesperpixel x 2 buffers :
>>    16 MiB
>>
>> 3) 1920x1080 HDMI display supported
>> -> 1920 width x 1080 height x 4 bytesperpixel x 2 buffers :
>>    15.82 MiB which is ~16 MiB
>>
>> 4) IMG GPU shares with display allocated buffers while rendering
>>    but in case some dedicated operation viz color conversion,
>>    keeping same window of ~16 MiB for GPU too.
>>
>> Total is 80 MiB and adding 32 MiB for other peripherals and extra
>> 16 MiB to keep as buffer for fragmentation thus rounding total to 128
>> MiB.
>>
>> Signed-off-by: Devarsh Thakkar <devarsht at ti.com>
>> Acked-by: Darren Etheridge <detheridge at ti.com>
>> Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
>> ---
> 
> I don't think this is right approach. There are other techniques
> than having to do this (Andrew: please comment) and require drivers to
> behave properly.

Sorry but I did not understand clearly the disadvantage of this approach.
Here we are reserving CMA and also marking it as re-usable so that in case
driver is not using it OS can use that region.

Also I see quite a few vendors already taking this approach :

$grep -r cma-default arch/arm64/boot/dts
arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts:276:
 linux,cma-default;
arch/arm64/boot/dts/qcom/sc8280xp-crd.dts:222:
linux,cma-default;
arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts:201:
         linux,cma-default;
arch/arm64/boot/dts/freescale/imx8ulp-evk.dts:32:
linux,cma-default;
arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi:198:
 linux,cma-default;
arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi:48:
linux,cma-default;
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:50:
linux,cma-default;
arch/arm64/boot/dts/freescale/imx93-tqma9352.dtsi:24:
linux,cma-default;
arch/arm64/boot/dts/freescale/imx8mq-tqma8mq.dtsi:59:
linux,cma-default;
arch/arm64/boot/dts/freescale/imx8mn-tqma8mqnl.dtsi:46:
linux,cma-default;
arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts:28:
linux,cma-default;
arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts:67:
linux,cma-default;
arch/arm64/boot/dts/amlogic/meson-gx.dtsi:63:
linux,cma-default;
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi:121:
linux,cma-default;
arch/arm64/boot/dts/amlogic/meson-a1.dtsi:59:
linux,cma-default;


 I am esp concerned since there are platforms based on
> am62x and just 256MB DDR.
> 

The file "k3-am62x-sk-common.dtsi" refers DDR memory size as 2Gb[1] and so I
put CMA reservation in same file assuming all boards including this file have
2Gb.

But if there are some boards having lesser DDR and including this
k3-am62x-sk-common.dtsi and overriding memory node, I can put the CMA
reservation node in board specific file i.e. k3-am625-sk.dts in V2.

Kindly let me know if above is preferred approach.

[1]
https://gitlab.com/linux-kernel/linux-next/-/blob/next-20230807/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi?ref_type=tags#L33

Regards
Devarsh

>>  arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 8 ++++++++
>>  1 file changed, 8 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
>> index 34c8ffc553ec..9dd6e23ca9ca 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
>> +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
>> @@ -47,6 +47,14 @@ ramoops at 9ca00000 {
>>  			pmsg-size = <0x8000>;
>>  		};
>>  
>> +		/* global cma region */
>> +		linux,cma {
>> +			compatible = "shared-dma-pool";
>> +			reusable;
>> +			size = <0x00 0x8000000>;
>> +			linux,cma-default;
>> +		};
>> +
>>  		secure_tfa_ddr: tfa at 9e780000 {
>>  			reg = <0x00 0x9e780000 0x00 0x80000>;
>>  			alignment = <0x1000>;
>> -- 
>> 2.34.1
>>
>