[PATCH v3 46/50] ARM: at91: Kconfig: add config flag for SAM9X7 SoC

[claudiu beznea]

On 28.07.2023 13:30, Varshini Rajendran wrote:
> Add config flag for sam9x7 SoC.
> 
> Signed-off-by: Varshini Rajendran <varshini.rajendran at microchip.com>

Reviewed-by: Claudiu Beznea <claudiu.beznea at tuxon.dev>

> ---
>  arch/arm/mach-at91/Kconfig | 23 ++++++++++++++++++++---
>  1 file changed, 20 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index a8c022b4c053..49d38a3a47de 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -141,11 +141,28 @@ config SOC_SAM9X60
>  	help
>  	  Select this if you are using Microchip's SAM9X60 SoC
>  
> +config SOC_SAM9X7
> +	bool "SAM9X7"
> +	depends on ARCH_MULTI_V5
> +	select ATMEL_AIC5_IRQ
> +	select ATMEL_PM if PM
> +	select ATMEL_SDRAMC
> +	select CPU_ARM926T
> +	select HAVE_AT91_USB_CLK
> +	select HAVE_AT91_GENERATED_CLK
> +	select HAVE_AT91_SAM9X60_PLL
> +	select MEMORY
> +	select PINCTRL_AT91
> +	select SOC_SAM_V4_V5
> +	select SRAM if PM
> +	help
> +	  Select this if you are using Microchip's SAM9X7 SoC
> +
>  comment "Clocksource driver selection"
>  
>  config ATMEL_CLOCKSOURCE_PIT
>  	bool "Periodic Interval Timer (PIT) support"
> -	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
> +	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
>  	default SOC_AT91SAM9 || SOC_SAMA5
>  	select ATMEL_PIT
>  	help
> @@ -155,7 +172,7 @@ config ATMEL_CLOCKSOURCE_PIT
>  
>  config ATMEL_CLOCKSOURCE_TCB
>  	bool "Timer Counter Blocks (TCB) support"
> -	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
> +	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA5
>  	select ATMEL_TCB_CLKSRC
>  	help
>  	  Select this to get a high precision clocksource based on a
> @@ -166,7 +183,7 @@ config ATMEL_CLOCKSOURCE_TCB
>  
>  config MICROCHIP_CLOCKSOURCE_PIT64B
>  	bool "64-bit Periodic Interval Timer (PIT64B) support"
> -	default SOC_SAM9X60 || SOC_SAMA7
> +	default SOC_SAM9X60 || SOC_SAM9X7 || SOC_SAMA7
>  	select MICROCHIP_PIT64B
>  	help
>  	  Select this to get a high resolution clockevent (SAM9X60) or