[PATCH] arm64: dts: ti: k3-j721e-main: Update delay select values for MMC subsystems

[Bhavya Kapoor]

Update the delay values for various speed modes supported, based on
the revised august 2021 J721E Datasheet.

[1] - Table 7-77. MMC0 DLL Delay Mapping for All Timing Modes and
Table 7-86. MMC1/2 DLL Delay Mapping for All Timing Modes, in
https://www.ti.com/lit/ds/symlink/tda4vm.pdf,
(SPRSP36J – FEBRUARY 2019 – REVISED AUGUST 2021)

Signed-off-by: Bhavya Kapoor <b-kapoor at ti.com>
---
 arch/arm64/boot/dts/ti/k3-j721e-main.dtsi | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 10c8a5fb4ee2..c249cc3d1fba 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -1287,8 +1287,8 @@ main_sdhci0: mmc at 4f80000 {
 		bus-width = <8>;
 		mmc-hs200-1_8v;
 		mmc-ddr-1_8v;
-		ti,otap-del-sel-legacy = <0xf>;
-		ti,otap-del-sel-mmc-hs = <0xf>;
+		ti,otap-del-sel-legacy = <0x0>;
+		ti,otap-del-sel-mmc-hs = <0x0>;
 		ti,otap-del-sel-ddr52 = <0x5>;
 		ti,otap-del-sel-hs200 = <0x6>;
 		ti,otap-del-sel-hs400 = <0x0>;
@@ -1309,11 +1309,12 @@ main_sdhci1: mmc at 4fb0000 {
 		assigned-clocks = <&k3_clks 92 0>;
 		assigned-clock-parents = <&k3_clks 92 1>;
 		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
 		ti,itap-del-sel-legacy = <0x0>;
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
@@ -1335,11 +1336,12 @@ main_sdhci2: mmc at 4f98000 {
 		assigned-clocks = <&k3_clks 93 0>;
 		assigned-clock-parents = <&k3_clks 93 1>;
 		ti,otap-del-sel-legacy = <0x0>;
-		ti,otap-del-sel-sd-hs = <0xf>;
+		ti,otap-del-sel-sd-hs = <0x0>;
 		ti,otap-del-sel-sdr12 = <0xf>;
 		ti,otap-del-sel-sdr25 = <0xf>;
 		ti,otap-del-sel-sdr50 = <0xc>;
 		ti,otap-del-sel-ddr50 = <0xc>;
+		ti,otap-del-sel-sdr104 = <0x5>;
 		ti,itap-del-sel-legacy = <0x0>;
 		ti,itap-del-sel-sd-hs = <0x0>;
 		ti,itap-del-sel-sdr12 = <0x0>;
-- 
2.34.1