[PATCH v2 1/4] spi: s3c64xx: changed to PIO mode if there is no DMA

[Jaewon Kim]

On 23. 4. 21. 00:40, Krzysztof Kozlowski wrote:
> On 19/04/2023 08:06, Jaewon Kim wrote:
>> Polling mode supported with qurik if there was no DMA in the SOC.
>> However, there are cased where we cannot or do not want to use DMA.
>> To support this case, if DMA is not set, it is switched to polling mode.
>>
> (...)
>
>>   #define msecs_to_loops(t) (loops_per_jiffy / 1000 * HZ * t)
>> -#define is_polling(x)	(x->port_conf->quirks & S3C64XX_SPI_QUIRK_POLL)
>> +#define is_polling(x)	(x->cntrlr_info->polling)
>>   
>>   #define RXBUSY    (1<<2)
>>   #define TXBUSY    (1<<3)
>> @@ -1067,6 +1066,11 @@ static struct s3c64xx_spi_info *s3c64xx_spi_parse_dt(struct device *dev)
>>   		sci->num_cs = temp;
>>   	}
>>   
>> +	if (!of_find_property(dev->of_node, "dmas", NULL)) {
> of_property_present()

I will change it to of_property_present().


>
> Best regards,
> Krzysztof
>
>
Thanks

Jaewon Kim