[net-next PATCH v7 00/16] net: Add basic LED support for switch/phy

patchwork-bot+netdevbpf at kernel.org patchwork-bot+netdevbpf at kernel.org
Wed Apr 19 05:00:23 PDT 2023


Hello:

This series was applied to netdev/net-next.git (main)
by David S. Miller <davem at davemloft.net>:

On Mon, 17 Apr 2023 17:17:22 +0200 you wrote:
> This is a continue of [1]. It was decided to take a more gradual
> approach to implement LEDs support for switch and phy starting with
> basic support and then implementing the hw control part when we have all
> the prereq done.
> 
> This series implements only the brightness_set() and blink_set() ops.
> An example of switch implementation is done with qca8k.
> 
> [...]

Here is the summary with links:
  - [net-next,v7,01/16] net: dsa: qca8k: move qca8k_port_to_phy() to header
    https://git.kernel.org/netdev/net-next/c/3e8b4d6277fd
  - [net-next,v7,02/16] net: dsa: qca8k: add LEDs basic support
    https://git.kernel.org/netdev/net-next/c/1e264f9d2918
  - [net-next,v7,03/16] net: dsa: qca8k: add LEDs blink_set() support
    https://git.kernel.org/netdev/net-next/c/91acadcc6e59
  - [net-next,v7,04/16] leds: Provide stubs for when CLASS_LED & NEW_LEDS are disabled
    https://git.kernel.org/netdev/net-next/c/e5029edd5393
  - [net-next,v7,05/16] net: phy: Add a binding for PHY LEDs
    https://git.kernel.org/netdev/net-next/c/01e5b728e9e4
  - [net-next,v7,06/16] net: phy: phy_device: Call into the PHY driver to set LED brightness
    https://git.kernel.org/netdev/net-next/c/684818189b04
  - [net-next,v7,07/16] net: phy: marvell: Add software control of the LEDs
    https://git.kernel.org/netdev/net-next/c/2d3960e58ef7
  - [net-next,v7,08/16] net: phy: phy_device: Call into the PHY driver to set LED blinking
    https://git.kernel.org/netdev/net-next/c/4e901018432e
  - [net-next,v7,09/16] net: phy: marvell: Implement led_blink_set()
    https://git.kernel.org/netdev/net-next/c/ea9e86485dec
  - [net-next,v7,10/16] dt-bindings: net: ethernet-controller: Document support for LEDs node
    https://git.kernel.org/netdev/net-next/c/57b6c752c5c0
  - [net-next,v7,11/16] dt-bindings: net: dsa: qca8k: add LEDs definition example
    https://git.kernel.org/netdev/net-next/c/ed617bc022f4
  - [net-next,v7,12/16] ARM: dts: qcom: ipq8064-rb3011: Drop unevaluated properties in switch nodes
    https://git.kernel.org/netdev/net-next/c/939595c79d12
  - [net-next,v7,13/16] ARM: dts: qcom: ipq8064-rb3011: Add Switch LED for each port
    https://git.kernel.org/netdev/net-next/c/09930f1fb875
  - [net-next,v7,14/16] dt-bindings: net: phy: Document support for LEDs node
    https://git.kernel.org/netdev/net-next/c/18a24b694a2b
  - [net-next,v7,15/16] arm: mvebu: dt: Add PHY LED support for 370-rd WAN port
    https://git.kernel.org/netdev/net-next/c/380a8fe1b2f4
  - [net-next,v7,16/16] Documentation: LEDs: Describe good names for network LEDs
    https://git.kernel.org/netdev/net-next/c/c693ea2fd6e3

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html





More information about the linux-arm-kernel mailing list