[PATCH 1/2] dt-bindings: phy: imx8mq-usb: add phy tuning properties

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Wed Apr 5 04:51:02 PDT 2023


On 05/04/2023 13:21, Johannes Zink wrote:
> Add optional properties for tuning of usb phy.
> 
> Signed-off-by: Johannes Zink <j.zink at pengutronix.de>
> ---
>  .../bindings/phy/fsl,imx8mq-usb-phy.yaml      | 40 +++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> index e6f9f5540cc3..f452a41b4f32 100644
> --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml
> @@ -35,6 +35,46 @@ properties:
>      description:
>        A phandle to the regulator for USB VBUS.
>  
> +  fsl,phy-tx-vref-tune:
> +    description:
> +      HS DC Voltage level adjustment

"Level" in what units?

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16]
> +
> +  fsl,phy-tx-rise-tune:
> +    description:
> +      HS Transmitter Rise/Fall Time Adjustment
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3]
> +
> +  fsl,phy-tx-preemp-amp-tune:
> +    description:
> +      HS Transmitter Pre-Emphasis Current Control

If this is current then use standard unit suffixes.

> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3]
> +
> +  fsl,phy-tx-vboost-level:
> +    description:
> +      TX Voltage Boost Level
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 2, 3]
> +
> +  fsl,phy-comp-dis-tune:
> +    description:
> +      Disconnect Threshold Adjustment
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    enum: [0, 1, 2, 3, 4, 5, 6, 7]
> +
> +  fsl,phy-pcs-tx-deemph-3p5db:
> +    description:
> +      TX De-Emphasis at 3.5 dB
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  fsl,phy-pcs-tx-swing-full:
> +    description:
> +      TX Amplitude

I have feeling you just pasted here short titles from datasheet. They
are not that helpful.



Best regards,
Krzysztof




More information about the linux-arm-kernel mailing list