[PATCH v3 2/3] dmaengine: ti: convert k3-udma to module
Kevin Hilman
khilman at baylibre.com
Thu Sep 29 16:48:19 PDT 2022
Currently k3-udma driver is built as separate platform drivers with a
shared probe and identical code path, just differnet platform data.
To enable to build as module, convert the separate platform driver
into a single module_platform_driver with the data selection done via
compatible string and of_match. The separate of_match tables are also
combined into a single table to avoid the multiple calls to
of_match_node()
Since all modern TI platforms using this are DT enabled, the removal
of separate platform_drivers should have no functional change.
Acked-by: Peter Ujfalusi <peter.ujfalusi at gmail.com>
Signed-off-by: Kevin Hilman <khilman at baylibre.com>
---
drivers/dma/ti/Kconfig | 4 ++--
drivers/dma/ti/k3-udma-glue.c | 5 ++++-
drivers/dma/ti/k3-udma.c | 40 +++++------------------------------
3 files changed, 11 insertions(+), 38 deletions(-)
diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
index 79618fac119a..f196be3b222f 100644
--- a/drivers/dma/ti/Kconfig
+++ b/drivers/dma/ti/Kconfig
@@ -35,7 +35,7 @@ config DMA_OMAP
DMA engine is found on OMAP and DRA7xx parts.
config TI_K3_UDMA
- bool "Texas Instruments UDMA support"
+ tristate "Texas Instruments UDMA support"
depends on ARCH_K3
depends on TI_SCI_PROTOCOL
depends on TI_SCI_INTA_IRQCHIP
@@ -48,7 +48,7 @@ config TI_K3_UDMA
DMA engine is used in AM65x and j721e.
config TI_K3_UDMA_GLUE_LAYER
- bool "Texas Instruments UDMA Glue layer for non DMAengine users"
+ tristate "Texas Instruments UDMA Glue layer for non DMAengine users"
depends on ARCH_K3
depends on TI_K3_UDMA
help
diff --git a/drivers/dma/ti/k3-udma-glue.c b/drivers/dma/ti/k3-udma-glue.c
index 4fdd9f06b723..c29de4695ae7 100644
--- a/drivers/dma/ti/k3-udma-glue.c
+++ b/drivers/dma/ti/k3-udma-glue.c
@@ -6,6 +6,7 @@
*
*/
+#include <linux/module.h>
#include <linux/atomic.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
@@ -1433,4 +1434,6 @@ static int __init k3_udma_glue_class_init(void)
{
return class_register(&k3_udma_glue_devclass);
}
-arch_initcall(k3_udma_glue_class_init);
+
+module_init(k3_udma_glue_class_init);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
index 2f0d2c68c93c..7239ff31c8c5 100644
--- a/drivers/dma/ti/k3-udma.c
+++ b/drivers/dma/ti/k3-udma.c
@@ -5,6 +5,7 @@
*/
#include <linux/kernel.h>
+#include <linux/module.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
@@ -4318,18 +4319,10 @@ static const struct of_device_id udma_of_match[] = {
.compatible = "ti,j721e-navss-mcu-udmap",
.data = &j721e_mcu_data,
},
- { /* Sentinel */ },
-};
-
-static const struct of_device_id bcdma_of_match[] = {
{
.compatible = "ti,am64-dmss-bcdma",
.data = &am64_bcdma_data,
},
- { /* Sentinel */ },
-};
-
-static const struct of_device_id pktdma_of_match[] = {
{
.compatible = "ti,am64-dmss-pktdma",
.data = &am64_pktdma_data,
@@ -5254,14 +5247,9 @@ static int udma_probe(struct platform_device *pdev)
return -ENOMEM;
match = of_match_node(udma_of_match, dev->of_node);
- if (!match)
- match = of_match_node(bcdma_of_match, dev->of_node);
if (!match) {
- match = of_match_node(pktdma_of_match, dev->of_node);
- if (!match) {
- dev_err(dev, "No compatible match found\n");
- return -ENODEV;
- }
+ dev_err(dev, "No compatible match found\n");
+ return -ENODEV;
}
ud->match_data = match->data;
@@ -5494,27 +5482,9 @@ static struct platform_driver udma_driver = {
},
.probe = udma_probe,
};
-builtin_platform_driver(udma_driver);
-static struct platform_driver bcdma_driver = {
- .driver = {
- .name = "ti-bcdma",
- .of_match_table = bcdma_of_match,
- .suppress_bind_attrs = true,
- },
- .probe = udma_probe,
-};
-builtin_platform_driver(bcdma_driver);
-
-static struct platform_driver pktdma_driver = {
- .driver = {
- .name = "ti-pktdma",
- .of_match_table = pktdma_of_match,
- .suppress_bind_attrs = true,
- },
- .probe = udma_probe,
-};
-builtin_platform_driver(pktdma_driver);
+module_platform_driver(udma_driver);
+MODULE_LICENSE("GPL v2");
/* Private interfaces to UDMA */
#include "k3-udma-private.c"
--
2.34.0
More information about the linux-arm-kernel
mailing list