[PATCH RESEND v3 11/17] EDAC/synopsys: Drop redundant info from error message

[Serge Semin]

Currently the custom error message is too long so the corresponding log
messages printed in several lines. There is some duplicated/redundant
information we can remove from it. First of all we can shorten it out by
dropping the message prefix "DDR ECC error type:%s". Indeed the text
printed to the console later by the edac_mc_printk() method will contain
the error type and the memory controller id referring to the device
detected the error. So having the same info in the custom part of the
same message is useless especially seeing the string has got too long
already. Secondly referring to the corrected bit as "Bit Position" is
redundant since saying just "Bit" is not that less descriptive. Let's
drop all of these parts of the error message then so to have a shorter
but still informative enough log message.

Signed-off-by: Serge Semin <Sergey.Semin at baikalelectronics.ru>
---
 drivers/edac/synopsys_edac.c | 19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

diff --git a/drivers/edac/synopsys_edac.c b/drivers/edac/synopsys_edac.c
index 2740f6c8c249..5088634bc213 100644
--- a/drivers/edac/synopsys_edac.c
+++ b/drivers/edac/synopsys_edac.c
@@ -484,13 +484,13 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
 		pinf = &p->ceinfo;
 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type:%s Row %d Col %d Bank %d Bank Group %d Bit Position: %d Data: 0x%08x",
-				 "CE", pinf->row, pinf->col, pinf->bank,
-				 pinf->bankgrp, pinf->bitpos, pinf->data);
+				 "Row %d Col %d Bank %d Bank Group %d Bit %d Data 0x%08x",
+				 pinf->row, pinf->col, pinf->bank, pinf->bankgrp,
+				 pinf->bitpos, pinf->data);
 		} else {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type:%s Row %d Bank %d Col %d Bit Position: %d Data: 0x%08x",
-				 "CE", pinf->row, pinf->bank, pinf->col,
+				 "Row %d Bank %d Col %d Bit: %d Data: 0x%08x",
+				 pinf->row, pinf->bank, pinf->col,
 				 pinf->bitpos, pinf->data);
 		}
 
@@ -503,13 +503,12 @@ static void handle_error(struct mem_ctl_info *mci, struct synps_ecc_status *p)
 		pinf = &p->ueinfo;
 		if (priv->p_data->quirks & DDR_ECC_INTR_SUPPORT) {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type :%s Row %d Col %d Bank %d Bank Group %d",
-				 "UE", pinf->row, pinf->col, pinf->bank,
-				 pinf->bankgrp);
+				 "Row %d Col %d Bank %d Bank Group %d",
+				 pinf->row, pinf->col, pinf->bank, pinf->bankgrp);
 		} else {
 			snprintf(priv->message, SYNPS_EDAC_MSG_SIZE,
-				 "DDR ECC error type :%s Row %d Bank %d Col %d ",
-				 "UE", pinf->row, pinf->bank, pinf->col);
+				 "Row %d Bank %d Col %d",
+				 pinf->row, pinf->bank, pinf->col);
 		}
 
 		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci,
-- 
2.37.3