[RFC PATCH v4 2/5] dt-bindings: net: can: add STM32 bxcan DT bindings

[Rob Herring]

On Sun, 25 Sep 2022 19:52:06 +0200, Dario Binacchi wrote:
> Add documentation of device tree bindings for the STM32 basic extended
> CAN (bxcan) controller.
> 
> Signed-off-by: Dario Binacchi <dario.binacchi at amarulasolutions.com>
> 
> ---
> 
> Changes in v4:
> - Remove "st,stm32f4-bxcan-core" compatible. In this way the can nodes
>  (compatible "st,stm32f4-bxcan") are no longer children of a parent
>   node with compatible "st,stm32f4-bxcan-core".
> - Add the "st,gcan" property (global can memory) to can nodes which
>   references a "syscon" node containing the shared clock and memory
>   addresses.
> 
> Changes in v3:
> - Remove 'Dario Binacchi <dariobin at libero.it>' SOB.
> - Add description to the parent of the two child nodes.
> - Move "patterProperties:" after "properties: in top level before "required".
> - Add "clocks" to the "required:" list of the child nodes.
> 
> Changes in v2:
> - Change the file name into 'st,stm32-bxcan-core.yaml'.
> - Rename compatibles:
>   - st,stm32-bxcan-core -> st,stm32f4-bxcan-core
>   - st,stm32-bxcan -> st,stm32f4-bxcan
> - Rename master property to st,can-master.
> - Remove the status property from the example.
> - Put the node child properties as required.
> 
>  .../bindings/net/can/st,stm32-bxcan.yaml      | 83 +++++++++++++++++++
>  1 file changed, 83 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/can/st,stm32-bxcan.yaml
> 

Reviewed-by: Rob Herring <robh at kernel.org>