[PATCH] clk: sunxi-ng: h6: Fix default PLL GPU rate

[Stephen Boyd]

Quoting Jernej Skrabec (2022-09-28 13:01:22)
> In commit 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock
> configuration to support DFS") divider M0 was forced to be 1 in order to
> support DFS. However, that left N as it is, at high value of 36. On
> boards without devfreq enabled (all of them in kernel 6.0), this
> effectively sets GPU frequency to 864 MHz. This is about 100 MHz above
> maximum supported frequency.
> 
> In order to fix this, let's set N to 18 (register value 17). That way
> default frequency of 432 MHz is preserved.
> 
> Fixes: 4167ac8a657e ("clk: sunxi-ng: sun50i: h6: Modify GPU clock configuration to support DFS")
> Signed-off-by: Jernej Skrabec <jernej.skrabec at gmail.com>
> ---

Applied to clk-fixes