[EXT] Re: [PATCH v2] PCI: aardvark: Implement workaround for PCIe Completion Timeout
Elad Nachman
enachman at marvell.com
Wed Sep 28 07:05:10 PDT 2022
Reviewed-by: Elad Nachman <enachman at marvell.com>
Thanks,
Elad.
-----Original Message-----
From: Pali Rohár <pali at kernel.org>
Sent: Monday, September 26, 2022 3:35 PM
To: Elad Nachman <enachman at marvell.com>
Cc: Thomas Petazzoni <thomas.petazzoni at bootlin.com>; Lorenzo Pieralisi <lpieralisi at kernel.org>; Bjorn Helgaas <bhelgaas at google.com>; Krzysztof Wilczyński <kw at linux.com>; Rob Herring <robh at kernel.org>; linux-pci at vger.kernel.org; linux-arm-kernel at lists.infradead.org; linux-kernel at vger.kernel.org; Gregory Clement <gregory.clement at bootlin.com>; Marek Behún <kabel at kernel.org>; Remi Pommarel <repk at triplefau.lt>; Xogium <contact at xogium.me>; Tomasz Maciej Nowak <tmn505 at gmail.com>
Subject: [EXT] Re: [PATCH v2] PCI: aardvark: Implement workaround for PCIe Completion Timeout
External Email
----------------------------------------------------------------------
Hello Elad, could you please review this patch? I have implemented it according your instructions, including that full memory barrier as you described.
On Tuesday 02 August 2022 14:38:16 Pali Rohár wrote:
> Marvell Armada 3700 Functional Errata, Guidelines, and Restrictions
> document describes in erratum 3.12 PCIe Completion Timeout (Ref #:
> 251), that PCIe IP does not support a strong-ordered model for inbound posted vs.
> outbound completion.
>
> As a workaround for this erratum, DIS_ORD_CHK flag in Debug Mux
> Control register must be set. It disables the ordering check in the
> core between Completions and Posted requests received from the link.
>
> Marvell also suggests to do full memory barrier at the beginning of
> aardvark summary interrupt handler before calling interrupt handlers
> of endpoint drivers in order to minimize the risk for the race
> condition documented in the Erratum between the DMA done status
> reading and the completion of writing to the host memory.
>
> More details about this issue and suggested workarounds are in discussion:
> https://urldefense.proofpoint.com/v2/url?u=https-3A__lore.kernel.org_l
> inux-2Dpci_BN9PR18MB425154FE5019DCAF2028A1D5DB8D9-40BN9PR18MB4251.namp
> rd18.prod.outlook.com_t_-23u&d=DwIDaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=eTeNT
> LEK5-TxXczjOcKPhANIFtlB9pP4lq9qhdlFrwQ&m=bjgkhgPgOjqCEsbHYHONCZMiFDX72
> MztWaE0AvWBktQVn3zKEDtUdn02Kx_KJ14B&s=SToGsDGEObwbZGilVtVZPyME8jNiRgrq
> 4SDYvqqT0TA&e=
>
> It was reported that enabling this workaround fixes instability issues
> and "Unhandled fault" errors when using 60 GHz WiFi 802.11ad card with
> Qualcomm
> QCA6335 chip under significant load which were caused by interrupt
> status stuck in the outbound CMPLT queue traced back to this erratum.
>
> This workaround fixes also kernel panic triggered after some minutes
> of usage 5 GHz WiFi 802.11ax card with Mediatek MT7915 chip:
>
> Internal error: synchronous external abort: 96000210 [#1] SMP
> Kernel panic - not syncing: Fatal exception in interrupt
>
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at bootlin.com>
> Signed-off-by: Pali Rohár <pali at kernel.org>
> Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller
> driver")
> Cc: stable at vger.kernel.org
> ---
> drivers/pci/controller/pci-aardvark.c | 10 ++++++++++
> 1 file changed, 10 insertions(+)
>
> diff --git a/drivers/pci/controller/pci-aardvark.c
> b/drivers/pci/controller/pci-aardvark.c
> index 060936ef01fe..3ae8a85ec72e 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -210,6 +210,8 @@ enum {
> };
>
> #define VENDOR_ID_REG (LMI_BASE_ADDR + 0x44)
> +#define DEBUG_MUX_CTRL_REG (LMI_BASE_ADDR + 0x208)
> +#define DIS_ORD_CHK BIT(30)
>
> /* PCIe core controller registers */
> #define CTRL_CORE_BASE_ADDR 0x18000
> @@ -558,6 +560,11 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
> PCIE_CORE_CTRL2_TD_ENABLE;
> advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
>
> + /* Disable ordering checks, workaround for erratum 3.12 "PCIe completion timeout" */
> + reg = advk_readl(pcie, DEBUG_MUX_CTRL_REG);
> + reg |= DIS_ORD_CHK;
> + advk_writel(pcie, reg, DEBUG_MUX_CTRL_REG);
> +
> /* Set lane X1 */
> reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
> reg &= ~LANE_CNT_MSK;
> @@ -1581,6 +1588,9 @@ static irqreturn_t advk_pcie_irq_handler(int irq, void *arg)
> struct advk_pcie *pcie = arg;
> u32 status;
>
> + /* Full memory barrier (ARM dsb sy), workaround for erratum 3.12 "PCIe completion timeout" */
> + mb();
> +
> status = advk_readl(pcie, HOST_CTRL_INT_STATUS_REG);
> if (!(status & PCIE_IRQ_CORE_INT))
> return IRQ_NONE;
> --
> 2.20.1
>
More information about the linux-arm-kernel
mailing list