[PATCH v2 3/3] dma/ti: convert PSIL to be buildable as module

[Péter Ujfalusi]

Hi Kevin,

On 28/09/2022 02:08, Kevin Hilman wrote:
> Combine all the SoC specific files into a single lib that can be
> built-in or built as a module.
> 
> Signed-off-by: Kevin Hilman <khilman at baylibre.com>
> ---
>   drivers/dma/ti/Kconfig   |  3 ++-
>   drivers/dma/ti/Makefile  | 15 ++++++++-------
>   drivers/dma/ti/k3-psil.c |  2 ++
>   3 files changed, 12 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/dma/ti/Kconfig b/drivers/dma/ti/Kconfig
> index f196be3b222f..2adc2cca10e9 100644
> --- a/drivers/dma/ti/Kconfig
> +++ b/drivers/dma/ti/Kconfig
> @@ -56,7 +56,8 @@ config TI_K3_UDMA_GLUE_LAYER
>   	  If unsure, say N.
>   
>   config TI_K3_PSIL
> -	bool
> +       tristate
> +       default TI_K3_UDMA
>   
>   config TI_DMA_CROSSBAR
>   	bool
> diff --git a/drivers/dma/ti/Makefile b/drivers/dma/ti/Makefile
> index d3a303f0d7c6..383bbd6d12b9 100644
> --- a/drivers/dma/ti/Makefile
> +++ b/drivers/dma/ti/Makefile
> @@ -4,11 +4,12 @@ obj-$(CONFIG_TI_EDMA) += edma.o
>   obj-$(CONFIG_DMA_OMAP) += omap-dma.o
>   obj-$(CONFIG_TI_K3_UDMA) += k3-udma.o
>   obj-$(CONFIG_TI_K3_UDMA_GLUE_LAYER) += k3-udma-glue.o
> -obj-$(CONFIG_TI_K3_PSIL) += k3-psil.o \
> -			    k3-psil-am654.o \
> -			    k3-psil-j721e.o \
> -			    k3-psil-j7200.o \
> -			    k3-psil-am64.o \
> -			    k3-psil-j721s2.o \
> -			    k3-psil-am62.o
> +obj-$(CONFIG_TI_K3_PSIL) += k3-psil-lib.o
> +k3-psil-lib-objs := k3-psil.o \
> +		    k3-psil-am654.o \
> +		    k3-psil-j721e.o \
> +		    k3-psil-j7200.o \
> +		    k3-psil-am64.o \
> +		    k3-psil-j721s2.o \
> +		    k3-psil-am62.o

Can you reverse the order? First declare the objects needed for k3-psil-lib.
It is more natural and easier to read.

With that change you can add my:
Acked-by: Peter Ujfalusi <peter.ujfalusi at gmail.com>


>   obj-$(CONFIG_TI_DMA_CROSSBAR) += dma-crossbar.o
> diff --git a/drivers/dma/ti/k3-psil.c b/drivers/dma/ti/k3-psil.c
> index 761a384093d2..8b6533a1eeeb 100644
> --- a/drivers/dma/ti/k3-psil.c
> +++ b/drivers/dma/ti/k3-psil.c
> @@ -5,6 +5,7 @@
>    */
>   
>   #include <linux/kernel.h>
> +#include <linux/module.h>
>   #include <linux/device.h>
>   #include <linux/init.h>
>   #include <linux/mutex.h>
> @@ -101,3 +102,4 @@ int psil_set_new_ep_config(struct device *dev, const char *name,
>   	return 0;
>   }
>   EXPORT_SYMBOL_GPL(psil_set_new_ep_config);
> +MODULE_LICENSE("GPL v2");

-- 
Péter