[PATCH v3 RESEND 2/2] ARM: dts: aspeed: Add device tree for Ampere's Mt. Mitchell BMC
Quan Nguyen
quan at os.amperecomputing.com
Tue Sep 27 20:26:39 PDT 2022
Dear Joel
Thank you for queuing the patch. Could possibly you pick it to openbmc
dev-5.15 branch as well?
Thank you,
- Quan
On 26/09/2022 14:58, Quan Nguyen wrote:
> The Mt. Mitchell BMC is an ASPEED AST2600-based BMC for the Mt. Mitchell
> hardware reference platform with AmpereOne(TM) processor.
>
> Signed-off-by: Quan Nguyen <quan at os.amperecomputing.com>
> Signed-off-by: Phong Vo <phong at os.amperecomputing.com>
> Signed-off-by: Thang Q. Nguyen <thang at os.amperecomputing.com>
> Reviewed-by: Joel Stanley <joel at jms.id.au>
> ---
> v3 :
> + Fix adc-i2c node to generic "adc" node [Krzysztof]
> + Remove unused status property in adc node [Krzysztof]
> + Remove trailing blank line at the end of file [Krzysztof]
> + Remove the wrong comment on vga_memory nodes [Andrew]
> + Remove gpio-keys [Andrew]
> + Remove the line-name for bmc-debug-mode, eth-phy-rst-n,
> eth-phy-int-n, bmc-salt12-s0-ssif-n, fpga-program-b,
> bmc-uart-cts1, bmc-spi-fm-boot-abr-pd, emmc-rst-n gpios [Andrew]
> + Update line-name for hs-csout-prochot, s1-spi-auth-fail-n [Quan]
> + Add line-name [s0|s1]-heartbeat [Quan]
>
> v2 :
> + Remove bootargs [Krzysztof]
> + Fix gpio-keys nodes name to conform with device tree binding
> documents [Krzysztof]
> + Fix some nodes to use generic name [Krzysztof]
> + Remove unnecessary blank line [Krzysztof]
> + Fix typo "LTC" to "LLC" in license info and corrected license
> info to GPL-2.0-only
>
> arch/arm/boot/dts/Makefile | 1 +
> .../boot/dts/aspeed-bmc-ampere-mtmitchell.dts | 546 ++++++++++++++++++
> 2 files changed, 547 insertions(+)
> create mode 100644 arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 1a718157d1a6..177fc02e5c6e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -1582,6 +1582,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
> aspeed-ast2600-evb.dtb \
> aspeed-bmc-amd-ethanolx.dtb \
> aspeed-bmc-ampere-mtjade.dtb \
> + aspeed-bmc-ampere-mtmitchell.dtb \
> aspeed-bmc-arm-stardragon4800-rep2.dtb \
> aspeed-bmc-asrock-e3c246d4i.dtb \
> aspeed-bmc-asrock-romed8hm3.dtb \
> diff --git a/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> new file mode 100644
> index 000000000000..606cd4be245a
> --- /dev/null
> +++ b/arch/arm/boot/dts/aspeed-bmc-ampere-mtmitchell.dts
> @@ -0,0 +1,546 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +// Copyright (c) 2022, Ampere Computing LLC
> +
> +/dts-v1/;
> +
> +#include "aspeed-g6.dtsi"
> +#include <dt-bindings/gpio/aspeed-gpio.h>
> +
> +/ {
> + model = "Ampere Mt.Mitchell BMC";
> + compatible = "ampere,mtmitchell-bmc", "aspeed,ast2600";
> +
> + chosen {
> + stdout-path = &uart5;
> + };
> +
> + memory at 80000000 {
> + device_type = "memory";
> + reg = <0x80000000 0x80000000>;
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + gfx_memory: framebuffer {
> + size = <0x01000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + video_engine_memory: video {
> + size = <0x04000000>;
> + alignment = <0x01000000>;
> + compatible = "shared-dma-pool";
> + reusable;
> + };
> +
> + vga_memory: region at bf000000 {
> + no-map;
> + compatible = "shared-dma-pool";
> + reg = <0xbf000000 0x01000000>; /* 16M */
> + };
> + };
> +
> + voltage_mon_reg: voltage-mon-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "ltc2497_reg";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + };
> +
> + gpioI5mux: mux-controller {
> + compatible = "gpio-mux";
> + #mux-control-cells = <0>;
> + mux-gpios = <&gpio0 ASPEED_GPIO(I, 5) GPIO_ACTIVE_HIGH>;
> + };
> +
> + adc0mux: adc0mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 0>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc1mux: adc1mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 1>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc2mux: adc2mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 2>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc3mux: adc3mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 3>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc4mux: adc4mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 4>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc5mux: adc5mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 5>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc6mux: adc6mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 6>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc7mux: adc7mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc0 7>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc8mux: adc8mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 0>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc9mux: adc9mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 1>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc10mux: adc10mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 2>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc11mux: adc11mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 3>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc12mux: adc12mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 4>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc13mux: adc13mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 5>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc14mux: adc14mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 6>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + adc15mux: adc15mux {
> + compatible = "io-channel-mux";
> + io-channels = <&adc1 7>;
> + #io-channel-cells = <1>;
> + io-channel-names = "parent";
> + mux-controls = <&gpioI5mux>;
> + channels = "s0", "s1";
> + };
> +
> + iio-hwmon {
> + compatible = "iio-hwmon";
> + io-channels = <&adc0mux 0>, <&adc0mux 1>,
> + <&adc1mux 0>, <&adc1mux 1>,
> + <&adc2mux 0>, <&adc2mux 1>,
> + <&adc3mux 0>, <&adc3mux 1>,
> + <&adc4mux 0>, <&adc4mux 1>,
> + <&adc5mux 0>, <&adc5mux 1>,
> + <&adc6mux 0>, <&adc6mux 1>,
> + <&adc7mux 0>, <&adc7mux 1>,
> + <&adc8mux 0>, <&adc8mux 1>,
> + <&adc9mux 0>, <&adc9mux 1>,
> + <&adc10mux 0>, <&adc10mux 1>,
> + <&adc11mux 0>, <&adc11mux 1>,
> + <&adc12mux 0>, <&adc12mux 1>,
> + <&adc13mux 0>, <&adc13mux 1>,
> + <&adc14mux 0>, <&adc14mux 1>,
> + <&adc15mux 0>, <&adc15mux 1>,
> + <&adc_i2c 0>, <&adc_i2c 1>,
> + <&adc_i2c 2>, <&adc_i2c 3>,
> + <&adc_i2c 4>, <&adc_i2c 5>,
> + <&adc_i2c 6>, <&adc_i2c 7>,
> + <&adc_i2c 8>, <&adc_i2c 9>,
> + <&adc_i2c 10>, <&adc_i2c 11>,
> + <&adc_i2c 12>, <&adc_i2c 13>,
> + <&adc_i2c 14>, <&adc_i2c 15>;
> + };
> +};
> +
> +&mdio0 {
> + status = "okay";
> +
> + ethphy0: ethernet-phy at 0 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <0>;
> + };
> +};
> +
> +&mac0 {
> + status = "okay";
> +
> + phy-mode = "rgmii";
> + phy-handle = <ðphy0>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_rgmii1_default>;
> +};
> +
> +&fmc {
> + status = "okay";
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64.dtsi"
> + };
> +
> + flash at 1 {
> + status = "okay";
> + m25p,fast-read;
> + label = "alt-bmc";
> + spi-max-frequency = <50000000>;
> +#include "openbmc-flash-layout-64-alt.dtsi"
> + };
> +};
> +
> +&spi1 {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_spi1_default>;
> +
> + flash at 0 {
> + status = "okay";
> + m25p,fast-read;
> + label = "pnor";
> + spi-max-frequency = <20000000>;
> + };
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&uart2 {
> + status = "okay";
> +};
> +
> +&uart3 {
> + status = "okay";
> +};
> +
> +&uart4 {
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
> +
> + temperature-sensor at 2e {
> + compatible = "adi,adt7490";
> + reg = <0x2e>;
> + };
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&i2c2 {
> + status = "okay";
> +
> + psu at 58 {
> + compatible = "pmbus";
> + reg = <0x58>;
> + };
> +
> + psu at 59 {
> + compatible = "pmbus";
> + reg = <0x59>;
> + };
> +};
> +
> +&i2c3 {
> + status = "okay";
> +};
> +
> +&i2c4 {
> + status = "okay";
> +
> + adc_i2c: adc at 16 {
> + compatible = "lltc,ltc2497";
> + reg = <0x16>;
> + vref-supply = <&voltage_mon_reg>;
> + #io-channel-cells = <1>;
> + };
> +
> + eeprom at 50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +
> + i2c-mux at 70 {
> + compatible = "nxp,pca9545";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + i2c-mux-idle-disconnect;
> +
> + i2c4_bus70_chn0: i2c at 0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x0>;
> +
> + outlet_temp1: temperature-sensor at 48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> + psu1_inlet_temp2: temperature-sensor at 49 {
> + compatible = "ti,tmp75";
> + reg = <0x49>;
> + };
> + };
> +
> + i2c4_bus70_chn1: i2c at 1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x1>;
> +
> + pcie_zone_temp1: temperature-sensor at 48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> + psu0_inlet_temp2: temperature-sensor at 49 {
> + compatible = "ti,tmp75";
> + reg = <0x49>;
> + };
> + };
> +
> + i2c4_bus70_chn2: i2c at 2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> +
> + pcie_zone_temp2: temperature-sensor at 48 {
> + compatible = "ti,tmp75";
> + reg = <0x48>;
> + };
> + outlet_temp2: temperature-sensor at 49 {
> + compatible = "ti,tmp75";
> + reg = <0x49>;
> + };
> + };
> +
> + i2c4_bus70_chn3: i2c at 3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x3>;
> +
> + mb_inlet_temp1: temperature-sensor at 7c {
> + compatible = "microchip,emc1413";
> + reg = <0x7c>;
> + };
> + mb_inlet_temp2: temperature-sensor at 4c {
> + compatible = "microchip,emc1413";
> + reg = <0x4c>;
> + };
> + };
> + };
> +};
> +
> +&i2c5 {
> + status = "okay";
> +
> + i2c-mux at 70 {
> + compatible = "nxp,pca9548";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x70>;
> + i2c-mux-idle-disconnect;
> + };
> +};
> +
> +&i2c6 {
> + status = "okay";
> + rtc at 51 {
> + compatible = "nxp,pcf85063a";
> + reg = <0x51>;
> + };
> +};
> +
> +&i2c7 {
> + status = "okay";
> +};
> +
> +&i2c9 {
> + status = "okay";
> +};
> +
> +&i2c11 {
> + status = "okay";
> +};
> +
> +&i2c14 {
> + status = "okay";
> + eeprom at 50 {
> + compatible = "atmel,24c64";
> + reg = <0x50>;
> + pagesize = <32>;
> + };
> +
> + bmc_ast2600_cpu: temperature-sensor at 35 {
> + compatible = "ti,tmp175";
> + reg = <0x35>;
> + };
> +};
> +
> +&adc0 {
> + ref_voltage = <2500>;
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
> + &pinctrl_adc2_default &pinctrl_adc3_default
> + &pinctrl_adc4_default &pinctrl_adc5_default
> + &pinctrl_adc6_default &pinctrl_adc7_default>;
> +};
> +
> +&adc1 {
> + ref_voltage = <2500>;
> + status = "okay";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
> + &pinctrl_adc10_default &pinctrl_adc11_default
> + &pinctrl_adc12_default &pinctrl_adc13_default
> + &pinctrl_adc14_default &pinctrl_adc15_default>;
> +};
> +
> +&vhub {
> + status = "okay";
> +};
> +
> +&video {
> + status = "okay";
> + memory-region = <&video_engine_memory>;
> +};
> +
> +&gpio0 {
> + gpio-line-names =
> + /*A0-A7*/ "","","","","","i2c2-reset-n","i2c6-reset-n","i2c4-reset-n",
> + /*B0-B7*/ "","","","","host0-sysreset-n","host0-pmin-n","","",
> + /*C0-C7*/ "s0-vrd-fault-n","s1-vrd-fault-n","","",
> + "irq-n","","vrd-sel","spd-sel",
> + /*D0-D7*/ "presence-ps0","presence-ps1","hsc-12vmain-alt2-n","ext-high-temp-n",
> + "","bmc-ncsi-txen","","",
> + /*E0-E7*/ "","","clk50m-bmc-ncsi","","","","","",
> + /*F0-F7*/ "s0-pcp-oc-warn-n","s1-pcp-oc-warn-n","power-chassis-control",
> + "cpu-bios-recover","s0-heartbeat","hs-csout-prochot",
> + "s0-vr-hot-n","s1-vr-hot-n",
> + /*G0-G7*/ "","","hsc-12vmain-alt1-n","","","","","",
> + /*H0-H7*/ "","","wd-disable-n","power-chassis-good","","","","",
> + /*I0-I7*/ "","","","","","adc-sw","power-button","rtc-battery-voltage-read-enable",
> + /*J0-J7*/ "","","","","","","","",
> + /*K0-K7*/ "","","","","","","","",
> + /*L0-L7*/ "","","","","","","","",
> + /*M0-M7*/ "","s0-ddr-save","soc-spi-nor-access","presence-cpu0",
> + "s0-rtc-lock","","","",
> + /*N0-N7*/ "hpm-fw-recovery","hpm-stby-rst-n","jtag-sel-s0","led-sw-hb",
> + "jtag-dbgr-prsnt-n","s1-heartbeat","","",
> + /*O0-O7*/ "","","","","","","","",
> + /*P0-P7*/ "ps0-ac-loss-n","ps1-ac-loss-n","","",
> + "led-fault","cpld-user-mode","jtag-srst-n","led-bmc-hb",
> + /*Q0-Q7*/ "","","","","","","","",
> + /*R0-R7*/ "","","","","","","","",
> + /*S0-S7*/ "","","identify-button","led-identify",
> + "s1-ddr-save","spi-nor-access","sys-pgood","presence-cpu1",
> + /*T0-T7*/ "","","","","","","","",
> + /*U0-U7*/ "","","","","","","","",
> + /*V0-V7*/ "s0-hightemp-n","s0-fault-alert","s0-sys-auth-failure-n",
> + "host0-reboot-ack-n","host0-ready","host0-shd-req-n",
> + "host0-shd-ack-n","s0-overtemp-n",
> + /*W0-W7*/ "ocp-aux-pwren","ocp-main-pwren","ocp-pgood","",
> + "bmc-ok","bmc-ready","spi0-program-sel","spi0-backup-sel",
> + /*X0-X7*/ "i2c-backup-sel","s1-fault-alert","s1-fw-boot-ok",
> + "s1-hightemp-n","s0-spi-auth-fail-n","s1-sys-auth-failure-n",
> + "s1-overtemp-n","s1-spi-auth-fail-n",
> + /*Y0-Y7*/ "","","","","","","","host0-special-boot",
> + /*Z0-Z7*/ "reset-button","ps0-pgood","ps1-pgood","","","","","";
> +};
> +
> +&gpio1 {
> + gpio-line-names =
> + /*18A0-18A7*/ "","","","","","","","",
> + /*18B0-18B7*/ "","","","","","","s0-soc-pgood","",
> + /*18C0-18C7*/ "uart1-mode0","uart1-mode1","uart2-mode0","uart2-mode1",
> + "uart3-mode0","uart3-mode1","uart4-mode0","uart4-mode1",
> + /*18D0-18D7*/ "","","","","","","","",
> + /*18E0-18E3*/ "","","","";
> +};
More information about the linux-arm-kernel
mailing list