[PATCH v1 14/17] phy: mediatek: add support for phy-mtk-hdmi-mt8195

[Chunfeng Yun]

On Tue, 2022-09-27 at 06:23 -0700, Guillaume Ranquet wrote:
> On Tue, 20 Sep 2022 09:46, Chunfeng Yun <chunfeng.yun at mediatek.com>
> wrote:
> > On Mon, 2022-09-19 at 18:56 +0200, Guillaume Ranquet wrote:
> > > Add basic support for the mediatek hdmi phy on MT8195 SoC
> > > 
> > > Signed-off-by: Guillaume Ranquet <granquet at baylibre.com>
> > > 
> > > diff --git a/drivers/gpu/drm/mediatek/mtk_mt8195_hdmi.c
> > > b/drivers/gpu/drm/mediatek/mtk_mt8195_hdmi.c
> > > index bb7593ea4c86..0157acdce56c 100644
> > > --- a/drivers/gpu/drm/mediatek/mtk_mt8195_hdmi.c
> > > +++ b/drivers/gpu/drm/mediatek/mtk_mt8195_hdmi.c
> > > @@ -1344,6 +1344,8 @@ static void mtk_hdmi_bridge_disable(struct
> > > drm_bridge *bridge,
> > >  	mtk_hdmi_disable_hdcp_encrypt(hdmi);
> > >  	usleep_range(50000, 50050);
> > > 
> > > +	phy_power_off(hdmi->phy);
> > > +
> > >  	hdmi->enabled = false;
> > >  }
> > > 
> > > diff --git a/drivers/phy/mediatek/Makefile
> > > b/drivers/phy/mediatek/Makefile
> > > index fb1f8edaffa7..c9a50395533e 100644
> > > --- a/drivers/phy/mediatek/Makefile
> > > +++ b/drivers/phy/mediatek/Makefile
> > > @@ -12,6 +12,7 @@ obj-$(CONFIG_PHY_MTK_XSPHY)		+= phy-
> > > mtk-
> > > xsphy.o
> > >  phy-mtk-hdmi-drv-y			:= phy-mtk-hdmi.o
> > >  phy-mtk-hdmi-drv-y			+= phy-mtk-hdmi-
> > > mt2701.o
> > >  phy-mtk-hdmi-drv-y			+= phy-mtk-hdmi-
> > > mt8173.o
> > > +phy-mtk-hdmi-drv-y			+= phy-mtk-hdmi-
> > > mt8195.o
> > >  obj-$(CONFIG_PHY_MTK_HDMI)		+= phy-mtk-hdmi-drv.o
> > > 
> > >  phy-mtk-mipi-dsi-drv-y			:= phy-mtk-mipi-dsi.o
> > > diff --git a/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> > > b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> > > new file mode 100644
> > > index 000000000000..149015b64c02
> > > --- /dev/null
> > > +++ b/drivers/phy/mediatek/phy-mtk-hdmi-mt8195.c
> > > @@ -0,0 +1,673 @@
> > > +// SPDX-License-Identifier: GPL-2.0
> > > +/*
> > > + * Copyright (c) 2021 MediaTek Inc.
> > > + * Copyright (c) 2021 BayLibre, SAS
> > > + */
> > > +#include <linux/delay.h>
> > > +#include <linux/io.h>
> > > +#include <linux/mfd/syscon.h>
> > > +#include <linux/module.h>
> > > +#include <linux/phy/phy.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/types.h>
> > > +#include <linux/nvmem-consumer.h>
> > > +
> > > +#include "phy-mtk-hdmi.h"
> > > +#include "phy-mtk-hdmi-mt8195.h"
> > > +
> > > +static void mtk_hdmi_ana_fifo_en(struct mtk_hdmi_phy *hdmi_phy)
> > > +{
> > > +	/* make data fifo writable for hdmi2.0 */
> > > +	mtk_hdmi_phy_mask(hdmi_phy, HDMI_ANA_CTL,
> > > REG_ANA_HDMI20_FIFO_EN,
> > > +			  REG_ANA_HDMI20_FIFO_EN);
> > > +}
> > > +
> > > +static void
> > > +mtk_mt8195_phy_tmds_high_bit_clk_ratio(struct mtk_hdmi_phy
> > > *hdmi_phy,
> > > +				       bool enable)
> > > +{
> > > +	mtk_hdmi_ana_fifo_en(hdmi_phy);
> > > +
> > > +	/* HDMI 2.0 specification, 3.4Gbps <= TMDS Bit Rate <= 6G,
> > > +	 * clock bit ratio 1:40, under 3.4Gbps, clock bit ratio 1:10
> > > +	 */
> > > +	if (enable)
> > > +		mtk_hdmi_phy_mask(hdmi_phy, HDMI20_CLK_CFG,
> > > +				  0x2 << REG_TXC_DIV_SHIFT,
> > 
> > Use FIELD_PREP() macro, then no need define REG_TXC_DIV_SHIFT
> > anymore.
> > 
> 
> Didn't know about FIELD_* macros, will use them for V2.
> 
> Thx for the suggestion.
Please use helpers defined in phy-mtk-io.h, the register access helpers
of mtk_hdmi_phy_* are already removed in phy next branch.

Thanks a lot