[PATCH v2] dt-bindings: mmc: arm,pl18x: Document interrupt-names property

[Marek Vasut]

On 9/27/22 14:18, Linus Walleij wrote:
> On Tue, Sep 27, 2022 at 12:41 PM Marek Vasut <marex at denx.de> wrote:
> 
>> --- a/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
>> +++ b/Documentation/devicetree/bindings/mmc/arm,pl18x.yaml
>> @@ -99,6 +99,9 @@ properties:
>>       minItems: 1
>>       maxItems: 2
>>
>> +  interrupt-names:
>> +    const: cmd_irq
> 
> This hardware come in variants with one or two IRQs.
> 
> Either two: "cmd_irq", "data_irq"
> 
> Or one combined IRQ (logic OR between those two!)
> I don't know what that should be called, perhaps
> "cmd_data_irq".
> 
> Since all DTS:es then have to be patched an alternative
> is as Arnd says to just delete the names. We should however
> at the very least patch the bindings description: for the IRQs
> to make the above situation clear.

Done, bindings updated and stm32/qcom DTs cleaned up.