[PATCH v2] arm64: dts: mt8192: Add vcodec lat and core nodes

[AngeloGioacchino Del Regno]

Il 27/09/22 04:19, Allen-KH Cheng (程冠勳) ha scritto:
> Hi Angelo,
> 
> On Mon, 2022-09-26 at 17:29 +0200, AngeloGioacchino Del Regno wrote:
>> Il 26/09/22 12:50, Allen-KH Cheng ha scritto:
>>> Add vcodec lat and core nodes for mt8192 SoC.
>>>
>>> Signed-off-by: Allen-KH Cheng <allen-kh.cheng at mediatek.com>
>>> Tested-by: Chen-Yu Tsai <wenst at chromium.org>
>>> ---
>>> Change in v1:
>>>     * Replace node names with video-codec
>>>       [Allen-KH Cheng <allen-kh.cheng at mediatek.com>]
>>> ---
>>> ---
>>>    arch/arm64/boot/dts/mediatek/mt8192.dtsi | 60
>>> ++++++++++++++++++++++++
>>>    1 file changed, 60 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
>>> b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
>>> index 6b20376191a7..214dfc6b0ed1 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8192.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8192.dtsi
>>> @@ -1449,6 +1449,66 @@
>>>    			power-domains = <&spm
>>> MT8192_POWER_DOMAIN_ISP2>;
>>>    		};
>>>    
>>> +		vcodec_dec: video-codec at 16000000 {
>>> +			compatible = "mediatek,mt8192-vcodec-dec";
>>> +			reg = <0 0x16000000 0 0x1000>;
>>> +			mediatek,scp = <&scp>;
>>> +			iommus = <&iommu0 M4U_PORT_L4_VDEC_MC_EXT>;
>>> +			dma-ranges = <0x1 0x0 0x0 0x40000000 0x0
>>> 0xfff00000>;
>>> +			#address-cells = <2>;
>>> +			#size-cells = <2>;
>>> +			ranges = <0 0 0 0x16000000 0 0x26000>;
>>> +
>>> +			vcodec_lat: video-codec at 10000 {
>>
>> Allen, this won't work :-(
>> Check Documentation/devicetree/bindings/media/mediatek,vcodec-subdev-
>> decoder.yaml
>> ...the schema requires vcodec-lat@[0-9a-f] and vcodec-core@[0-9a-f].
>>
>> If you want to call them all video-codec at addr, you have to also fix
>> the schema.
>>
>> P.S.: Did you try to run `make dtbs_check`?
>>
>> Regards,
>> Angelo
>>
> 
> Sorry, my bad. I alsways run `make dtbs_check` to confirm dtb with
> bindings. I just think we didn't limit node names in mtk-vodec
> bindings. I will pay attention next time.
> 
> 
> Since currently the vcodec lat and core nodes are absent from the mtk
> dts, do you think the child node name should be changed to something
> more general (ex: video-codec) in mediatek,vcodec-subdev-decoder
> bindings?

The video codec is mt8192-vcodec-dec, while the other nodes are describing
the VPU instances (and/or vpu cores)... I'm not sure.

Krzysztof, please, can you give your opinion on that?

Regards,
Angelo

> 
> Thanks,
> Allen
> 
> 
> 
> 
>