[PATCH v9 0/3] Add support for lan966x flexcom chip-select configuration

[Kavyasree.Kotagiri at microchip.com]

> This patch series converts atmel-flexcom bindings into json-schema format.
> Adds support for lan966x flexcom chip-select configurations and its
> DT bindings.
> 
> v8 -> v9:
>  - Use full schema path for i2c bindings.
> 
Hi Rob & Krzysztof,

Please let me know your comments on v9 patch series.

Thanks,
Kavya

> v7 -> v8:
>  - Added back patternProperties for child nodes.
>  - Changed compatible string to microchip,lan9668-flexcom.
> 
> v6 -> v7:
>  - Change filename to atmel,sama5d2-flexcom.yaml
>  - Add #address-cells, #size-cells to flexcom node - Fixed warnings.
> 
> v5 -> v6:
>  - Removed spi node from example as suggested by Rob and
>    also pattern properties(spi dt-bindings conversion to yaml patch is under
> review).
>    https://patchwork.kernel.org/project/linux-arm-
> kernel/patch/20220629125804.137099-1-sergiu.moga at microchip.com/
>    Once this is accepted, I will add back spi example through new patch.
> 
> v4 -> v5:
>  - Fix indentations of DT example.
>  - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then
>    "reg" property as it is not required.
> 
> v3 -> v4:
>  - Fix dtschema errors.
>  - Add a condition to flexcom chip-selects configuration as chip-select
>    lines are optional.
> 
> v2 -> v3:
>  - changed IRQ flag in dt-bindings example.
>  - added reg property specific to lan66x which is missed in v2.
>  - used goto label for clk_disable in error cases.
> 
> v1 -> v2:
>  - minor fix in title of dt-bindings.
>  - Modified new dt properties usage in atmel,flexcom.yaml.
>  - Used GENMASK and macros for maximum allowed values.
>  - Use u32 values for flexcom chipselects instead of strings.
>  - disable clock in case of errors.
> 
> Kavyasree Kotagiri (3):
>   dt-bindings: mfd: Convert atmel-flexcom to json-schema
>   dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for
>     lan966x
>   mfd: atmel-flexcom: Add support for lan966x flexcom chip-select
>     configuration
> 
>  .../bindings/mfd/atmel,sama5d2-flexcom.yaml   | 155 ++++++++++++++++++
>  .../devicetree/bindings/mfd/atmel-flexcom.txt |  63 -------
>  drivers/mfd/atmel-flexcom.c                   |  94 ++++++++++-
>  3 files changed, 248 insertions(+), 64 deletions(-)
>  create mode 100644
> Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-
> flexcom.txt
> 
> --
> 2.25.1