[PATCH 1/3] arm64: dts: rockchip: Add regulator suffix to rock-3a

[Michael Riesch]

Hi Chukun,

On 9/26/22 20:01, Chukun Pan wrote:
> Add -regulator suffix to regulator names on Radxa ROCK3 Model A
> board. This makes the naming more consistent.
> 
> Signed-off-by: Chukun Pan <amadeus at jmu.edu.cn>

Acked-by: Michael Riesch <michael.riesch at wolfvision.net>

Thanks and best regards,
Michael

> ---
>  arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 14 +++++++-------
>  1 file changed, 7 insertions(+), 7 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> index fb87a168fe96..8adf672709e8 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> @@ -60,7 +60,7 @@ simple-audio-card,codec {
>  		};
>  	};
>  
> -	vcc12v_dcin: vcc12v-dcin {
> +	vcc12v_dcin: vcc12v-dcin-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc12v_dcin";
>  		regulator-always-on;
> @@ -79,7 +79,7 @@ vcc3v3_pcie: vcc3v3-pcie-regulator {
>  		vin-supply = <&vcc5v0_sys>;
>  	};
>  
> -	vcc3v3_sys: vcc3v3-sys {
> +	vcc3v3_sys: vcc3v3-sys-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc3v3_sys";
>  		regulator-always-on;
> @@ -89,7 +89,7 @@ vcc3v3_sys: vcc3v3-sys {
>  		vin-supply = <&vcc12v_dcin>;
>  	};
>  
> -	vcc5v0_sys: vcc5v0-sys {
> +	vcc5v0_sys: vcc5v0-sys-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc5v0_sys";
>  		regulator-always-on;
> @@ -99,7 +99,7 @@ vcc5v0_sys: vcc5v0-sys {
>  		vin-supply = <&vcc12v_dcin>;
>  	};
>  
> -	vcc5v0_usb: vcc5v0-usb {
> +	vcc5v0_usb: vcc5v0-usb-regulator {
>  		compatible = "regulator-fixed";
>  		regulator-name = "vcc5v0_usb";
>  		regulator-always-on;
> @@ -109,7 +109,7 @@ vcc5v0_usb: vcc5v0-usb {
>  		vin-supply = <&vcc12v_dcin>;
>  	};
>  
> -	vcc5v0_usb_host: vcc5v0-usb-host {
> +	vcc5v0_usb_host: vcc5v0-usb-host-regulator {
>  		compatible = "regulator-fixed";
>  		enable-active-high;
>  		gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
> @@ -144,7 +144,7 @@ vcc5v0_usb_otg: vcc5v0-usb-otg-regulator {
>  		vin-supply = <&vcc5v0_usb>;
>  	};
>  
> -	vcc_cam: vcc-cam {
> +	vcc_cam: vcc-cam-regulator {
>  		compatible = "regulator-fixed";
>  		enable-active-high;
>  		gpio = <&gpio1 RK_PB1 GPIO_ACTIVE_HIGH>;
> @@ -160,7 +160,7 @@ regulator-state-mem {
>  		};
>  	};
>  
> -	vcc_mipi: vcc-mipi {
> +	vcc_mipi: vcc-mipi-regulator {
>  		compatible = "regulator-fixed";
>  		enable-active-high;
>  		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;