[PATCH v2 2/3] PCI: j721e: Add per platform maximum lane settings
Matt Ranostay
mranostay at ti.com
Mon Sep 26 10:55:37 PDT 2022
Various platforms have different maximum amount of lanes that
can be selected. Add max_lanes to struct j721e_pcie to allow
for error checking on num-lanes selection from device tree.
Cc: Kishon Vijay Abraham I <kishon at ti.com>
Signed-off-by: Matt Ranostay <mranostay at ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr at ti.com>
---
drivers/pci/controller/cadence/pci-j721e.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index d9b1527421c3..0a537f2d5078 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -47,8 +47,6 @@ enum link_status {
#define GENERATION_SEL_MASK GENMASK(1, 0)
-#define MAX_LANES 2
-
struct j721e_pcie {
struct cdns_pcie *cdns_pcie;
struct clk *refclk;
@@ -71,6 +69,7 @@ struct j721e_pcie_data {
unsigned int quirk_disable_flr:1;
u32 linkdown_irq_regfield;
unsigned int byte_access_allowed:1;
+ unsigned int max_lanes;
};
static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -294,11 +293,13 @@ static const struct j721e_pcie_data j721e_pcie_rc_data = {
.quirk_retrain_flag = true,
.byte_access_allowed = false,
.linkdown_irq_regfield = LINK_DOWN,
+ .max_lanes = 2,
};
static const struct j721e_pcie_data j721e_pcie_ep_data = {
.mode = PCI_MODE_EP,
.linkdown_irq_regfield = LINK_DOWN,
+ .max_lanes = 2,
};
static const struct j721e_pcie_data j7200_pcie_rc_data = {
@@ -306,23 +307,27 @@ static const struct j721e_pcie_data j7200_pcie_rc_data = {
.quirk_detect_quiet_flag = true,
.linkdown_irq_regfield = J7200_LINK_DOWN,
.byte_access_allowed = true,
+ .max_lanes = 4,
};
static const struct j721e_pcie_data j7200_pcie_ep_data = {
.mode = PCI_MODE_EP,
.quirk_detect_quiet_flag = true,
.quirk_disable_flr = true,
+ .max_lanes = 4,
};
static const struct j721e_pcie_data am64_pcie_rc_data = {
.mode = PCI_MODE_RC,
.linkdown_irq_regfield = J7200_LINK_DOWN,
.byte_access_allowed = true,
+ .max_lanes = 1,
};
static const struct j721e_pcie_data am64_pcie_ep_data = {
.mode = PCI_MODE_EP,
.linkdown_irq_regfield = J7200_LINK_DOWN,
+ .max_lanes = 1,
};
static const struct of_device_id of_j721e_pcie_match[] = {
@@ -436,7 +441,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
pcie->user_cfg_base = base;
ret = of_property_read_u32(node, "num-lanes", &num_lanes);
- if (ret || num_lanes > MAX_LANES)
+ if (ret || num_lanes > data->max_lanes)
num_lanes = 1;
pcie->num_lanes = num_lanes;
--
2.38.0.rc0.52.gdda7228a83
More information about the linux-arm-kernel
mailing list