[PATCH v5 22/30] thermal/drivers/imx: Use generic thermal_zone_get_trip() function
Daniel Lezcano
daniel.lezcano at linaro.org
Mon Sep 26 07:05:56 PDT 2022
The thermal framework gives the possibility to register the trip
points with the thermal zone. When that is done, no get_trip_* ops are
needed and they can be removed.
Convert ops content logic into generic trip points and register them with the
thermal zone.
Signed-off-by: Daniel Lezcano <daniel.lezcano at linaro.org>
---
drivers/thermal/imx_thermal.c | 72 +++++++++++++----------------------
1 file changed, 27 insertions(+), 45 deletions(-)
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 16663373b682..fb0d5cab70af 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -76,7 +76,6 @@
enum imx_thermal_trip {
IMX_TRIP_PASSIVE,
IMX_TRIP_CRITICAL,
- IMX_TRIP_NUM,
};
#define IMX_POLLING_DELAY 2000 /* millisecond */
@@ -115,6 +114,11 @@ struct thermal_soc_data {
u32 low_alarm_shift;
};
+static struct thermal_trip trips[] = {
+ [IMX_TRIP_PASSIVE] = { .type = THERMAL_TRIP_PASSIVE },
+ [IMX_TRIP_CRITICAL] = { .type = THERMAL_TRIP_CRITICAL },
+};
+
static struct thermal_soc_data thermal_imx6q_data = {
.version = TEMPMON_IMX6Q,
@@ -201,8 +205,6 @@ struct imx_thermal_data {
struct thermal_cooling_device *cdev;
struct regmap *tempmon;
u32 c1, c2; /* See formula in imx_init_calib() */
- int temp_passive;
- int temp_critical;
int temp_max;
int alarm_temp;
int last_temp;
@@ -279,12 +281,12 @@ static int imx_get_temp(struct thermal_zone_device *tz, int *temp)
/* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
if (data->socdata->version == TEMPMON_IMX6Q) {
- if (data->alarm_temp == data->temp_passive &&
- *temp >= data->temp_passive)
- imx_set_alarm_temp(data, data->temp_critical);
- if (data->alarm_temp == data->temp_critical &&
- *temp < data->temp_passive) {
- imx_set_alarm_temp(data, data->temp_passive);
+ if (data->alarm_temp == trips[IMX_TRIP_PASSIVE].temperature &&
+ *temp >= trips[IMX_TRIP_PASSIVE].temperature)
+ imx_set_alarm_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
+ if (data->alarm_temp == trips[IMX_TRIP_CRITICAL].temperature &&
+ *temp < trips[IMX_TRIP_PASSIVE].temperature) {
+ imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
dev_dbg(&tz->device, "thermal alarm off: T < %d\n",
data->alarm_temp / 1000);
}
@@ -330,29 +332,10 @@ static int imx_change_mode(struct thermal_zone_device *tz,
return 0;
}
-static int imx_get_trip_type(struct thermal_zone_device *tz, int trip,
- enum thermal_trip_type *type)
-{
- *type = (trip == IMX_TRIP_PASSIVE) ? THERMAL_TRIP_PASSIVE :
- THERMAL_TRIP_CRITICAL;
- return 0;
-}
-
static int imx_get_crit_temp(struct thermal_zone_device *tz, int *temp)
{
- struct imx_thermal_data *data = tz->devdata;
-
- *temp = data->temp_critical;
- return 0;
-}
-
-static int imx_get_trip_temp(struct thermal_zone_device *tz, int trip,
- int *temp)
-{
- struct imx_thermal_data *data = tz->devdata;
+ *temp = trips[IMX_TRIP_CRITICAL].temperature;
- *temp = (trip == IMX_TRIP_PASSIVE) ? data->temp_passive :
- data->temp_critical;
return 0;
}
@@ -371,10 +354,10 @@ static int imx_set_trip_temp(struct thermal_zone_device *tz, int trip,
return -EPERM;
/* do not allow passive to be set higher than critical */
- if (temp < 0 || temp > data->temp_critical)
+ if (temp < 0 || temp > trips[IMX_TRIP_CRITICAL].temperature)
return -EINVAL;
- data->temp_passive = temp;
+ trips[IMX_TRIP_PASSIVE].temperature = temp;
imx_set_alarm_temp(data, temp);
@@ -423,8 +406,6 @@ static struct thermal_zone_device_ops imx_tz_ops = {
.unbind = imx_unbind,
.get_temp = imx_get_temp,
.change_mode = imx_change_mode,
- .get_trip_type = imx_get_trip_type,
- .get_trip_temp = imx_get_trip_temp,
.get_crit_temp = imx_get_crit_temp,
.set_trip_temp = imx_set_trip_temp,
};
@@ -507,8 +488,8 @@ static void imx_init_temp_grade(struct platform_device *pdev, u32 ocotp_mem0)
* Set the critical trip point at 5 °C under max
* Set the passive trip point at 10 °C under max (changeable via sysfs)
*/
- data->temp_critical = data->temp_max - (1000 * 5);
- data->temp_passive = data->temp_max - (1000 * 10);
+ trips[IMX_TRIP_PASSIVE].temperature = data->temp_max - (1000 * 10);
+ trips[IMX_TRIP_CRITICAL].temperature = data->temp_max - (1000 * 5);
}
static int imx_init_from_tempmon_data(struct platform_device *pdev)
@@ -743,12 +724,13 @@ static int imx_thermal_probe(struct platform_device *pdev)
goto legacy_cleanup;
}
- data->tz = thermal_zone_device_register("imx_thermal_zone",
- IMX_TRIP_NUM,
- BIT(IMX_TRIP_PASSIVE), data,
- &imx_tz_ops, NULL,
- IMX_PASSIVE_DELAY,
- IMX_POLLING_DELAY);
+ data->tz = thermal_zone_device_register_with_trips("imx_thermal_zone",
+ trips,
+ ARRAY_SIZE(trips),
+ BIT(IMX_TRIP_PASSIVE), data,
+ &imx_tz_ops, NULL,
+ IMX_PASSIVE_DELAY,
+ IMX_POLLING_DELAY);
if (IS_ERR(data->tz)) {
ret = PTR_ERR(data->tz);
dev_err(&pdev->dev,
@@ -758,8 +740,8 @@ static int imx_thermal_probe(struct platform_device *pdev)
dev_info(&pdev->dev, "%s CPU temperature grade - max:%dC"
" critical:%dC passive:%dC\n", data->temp_grade,
- data->temp_max / 1000, data->temp_critical / 1000,
- data->temp_passive / 1000);
+ data->temp_max / 1000, trips[IMX_TRIP_CRITICAL].temperature / 1000,
+ trips[IMX_TRIP_PASSIVE].temperature / 1000);
/* Enable measurements at ~ 10 Hz */
regmap_write(map, data->socdata->measure_freq_ctrl + REG_CLR,
@@ -767,10 +749,10 @@ static int imx_thermal_probe(struct platform_device *pdev)
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
regmap_write(map, data->socdata->measure_freq_ctrl + REG_SET,
measure_freq << data->socdata->measure_freq_shift);
- imx_set_alarm_temp(data, data->temp_passive);
+ imx_set_alarm_temp(data, trips[IMX_TRIP_PASSIVE].temperature);
if (data->socdata->version == TEMPMON_IMX6SX)
- imx_set_panic_temp(data, data->temp_critical);
+ imx_set_panic_temp(data, trips[IMX_TRIP_CRITICAL].temperature);
regmap_write(map, data->socdata->sensor_ctrl + REG_CLR,
data->socdata->power_down_mask);
--
2.34.1
More information about the linux-arm-kernel
mailing list